I have an original iMac running on 10.4.11. I am kicked off the internet because it is asking for a Keychain password - I do not have a keychain password.
I have an original iMac running on 10.4.11. Suddenly I could not sign on to my browser, although I was connected to the internet - with 4 bars. I would get signed on and then get kicked off because Safari was requesting a Keychain password. I never used keychain so did not have a password.
Eventually i tried to reload the original software, but am niow unable to get the computer restarted and startup disk is in the machine. I have tried to start by holding down the "C" key, but after the apple comes on it reverts to a "Darwin message"
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
What does the darwin mesage say?
Run hardware test.
The orginal iMac had a 15inch crt screen.
To eject the dvd.
power off your machine. hold down your left mouse button. power on your machine. This should eject the cd.
Eject cd
Here is a web page on twelve ways to eject the cd.
http://www.osxfaq.com/dailytips/01-2003/01-16.ws
On a PowerPC-based Macintosh (but not an Intel-based Macintosh), you may use Open Firmware to eject a CD or DVD disc when normal methods for ejecting it have not succeeded.
Immediately after the startup sound, press and hold the key combination Command-Option-o-f. Enter commands:
eject cd
mac-boot
http://docs.info.apple.com/article.html?artnum=106752
Similar Messages
-
I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?
Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price
-
I Have an ipad 2 and it has started running really slow. Is there something I can do to fix this
PPlease helpYou may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
there is a flashing window which keeps asking: "enter your name and password for the server "192.168.1.102" (which is my Macbook's ip address)". choices are:
connect as: Guest or Registered User; Name and password; at the bottom: cancel or connect....
whatever I do it keeps coming back! I select: guest , click connect; it says "the server 192.168.1.102 does not allow Guest access".
I select Registered User; enter Name and password, the window disappears for a second without any popups but comes back up again .... "enter your name and password for the server........."
Just to see what response I would get I wrote different/wrong name and password; it said "you entered an invalid username or password please try again".... and then I click OK ....
and I am back to square one! I click cancel same thing ....window keeps coming back up asking me to "enter name and password for the server......."
Meanwhile when I open Finder; under SHARED I see 2 entries: "192.168.1.102" connected as "Ni... ZA..." (My user name) and "Ni.... Macbook" which has the same ip address as above and also connected as nidra... my other user name.
All the sharing files are on; security/firewall is off...
I just bought the iMac, 21.5 inch, 2.5 ghz, intel core quad i5, 500 gbOn your MB, go to system preferences>user and enable the guest account and login to that account
On your MB, go to system preferences>user and create a new user for remote access, choose a password and login to that account.
Either of these should work, if not, post back. -
Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?
Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box
-
I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email
If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..
-
Have iMac running OSX 10.5.8, where can I find the upgrade?
have iMac running OSX 10.5.8, where can I find the upgrade?
Why would that be irritating?? I suspect you are after Mavericks, in order to get Mavericks you have to have the Mac App Store app which did not become available until Snow Loepard 10.6.6. Once you have purchased and installed SL then install the 10.6.8 combo update, run Software Update again and install all suggested updates and finally you can get Mavericks.
-
My iMac running 10.7.5 has suddenly developed the habit of asking for my keychain password every 10 minutes or so. iTunes, mail and airport are the usual requesters. It's making me nuts! And no, I have not recently changed my password to start this new issue.
Hello dowaco
Try running Keychain First Aid on your keychain or just rese your Keychain to create another keychain to see if that resolves the issue of the repeated prompts for the password.
Resetting your keychain in Mac OS X
http://support.apple.com/kb/ts1544
Regards,
-Norm G. -
I have a late 2006 iMac with new Ram installed in late 2011or early2012 . I am currently running lion. Did/ hit something while half asleep and was asked for my recovery password, I didn't know it & not sure what I did after that but it wont boot up just searches with a light grey whit -ish screen. Cant get it to clear. Any advice?
Charlies Secret Angel-Try to boot in Safe mode, see if you are able: Hold down shift and then power on. For wireless keyboards, hold down shift after the chime.
Safe Boot
Resolve startup issues and perform disk maintenance with Disk -
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.
Working battery needs to be in for the computer to function.
-
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.
as far as I know then the target display mode is not an option with such an old mac
-
I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?
Use the download version:
Download CS3 products
Mylenium -
Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help
Yes it does and there is an indication that the software is downloading but after a few hours, it just stops without any error message. Everything simply disappears and I need to start over again. I have a superfast connection so it should no be this slow. Everything worked fine on my MBP and I am in the same place. Any ideas
Maybe you are looking for
-
Hi, It's been several nights that I have a dozen kernel panic on my Mid 2012 Mac Pro and during the day there is no problem. I'm hoping someone can help me identify what may have caused it. Thanks for looking: Processor 3.33 GHz 6-Core Intel Xeon Me
-
Flash Player crashes when going into full screen mode
Hey guys! It's basically as the title implies. Whenever I am watching a video and attempt to go into full screen mode, flash player crashes and I get an error window reading "Adobe Flash Player 11.3 r300 has stopped working". As a matter of fact, it
-
Problem w/ MouseMotionListener on JTable cell
Hey everyone, I am using a MouseMotionListener on a JTable, and in most cases it works fine. The case where it does NOT work as I would expect is when you are editing a cell. In that case, events do not register when the mouse is moving over the cell
-
Hi, experts, Iu2019m trying to use BW with office 2007 and windows vista. Although when I start RRMX transaction and every time Iu2019m going to u201Cedit queryu201D the excel stops working. How can I solve this problem? Thanks in advance! Kind regar
-
MacBook Pro Software Update 1.1 - Constantly needs instalation
The title says it all. Every time software update runs, it insists that the macbook MacBook Professional Software Update 1.1 needs to be installed. here's the log file: 2007-10-26 12:51:16 -0700: Installed "Remote Desktop Client" (3.2.1) 2007-10-28 1