I have an requirement to map journal fields whats are the functions

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
HI,
I have an requirement to map journal fields whats are the functions can i use in message mapping,please help me out
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

There is really no "best" setting here for the AirPort Express devices. If you need more wireless coverage in the area where an Express is located, then it makes sense to configure the Express to "extend" a wireless network.
If you already have good coverage in an area where an Express is located, then the "join" configuration makes sense.
I've yet to meet the first user who felt that he/she had too much wireless signal coverage in their home, but you never know.

Similar Messages

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

For one, their form factors are slightly different as the iPhone has a bit more squarish body whereas the iPod Touch has a tapered back to it.
The iPhone also has much better front and rear cameras. Exact details as to the difference in megapixels depends on whether or not you talking about the iPhone 4 or 4S. If you would like to get more details, you can always view
each models specs on Apple's online store.
See here for a better explanation.
http://en.wikipedia.org/wiki/IPod_Touch#Comparison_to_the_iPhone
I'm sure others will chime in with other things as well.
B-rock

Maps 2. What are the white dots meant to be ?

I've noticed that in Maps 2 (sure they are not there in Maps 1) that some roads (seemingly at random) have little white squares / dots running along them.
I say seemingly at random as I cannot fathom any logic as to which roads they appear on. They are constantly on the same roads... but these roads can be either major roads, little lanes and very very narrow side streets.
Sometimes they are only on part of a road and then stop... onlt to appear further along the road.
No documentation I can find explains what they mean.
Its not an end of the world issue, but its driving me crazy (pun not intended) as to what they represent.
They appear on the maps even when no navigation is set, so not route maps or markers for walking directions.
Anyone know the answer ?
A virtual beer for anyone that does ;-)
Solved!
Go to Solution.

No. The idea is that if you can drive on it, you can walk on it (excluding highways). But not all roads you can walk on can you also drive on.
What happened to me is that when I had old (v1) maps on my N95 and I updated the Maps to v2, my maps got corrupted, and they would show only half a street, and walk/drive info was all wrong.
I reset my N95 and uploaded the maps application and the maps and it worked fine ever since.
Try deleting all the maps with the MapLoader and if that doesn't help reinstall the Maps application. If that doesn't help, try resetting the device (*#7370#). You will lose all unsaved data, so backup your phone memory to the memory card in the Memory Card options -> Make a backup of phone memory. After reset, retrieve your phone data with the same option.

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

What are the Master Table validations required for below fields

Hi,
I have created a selection screen with following fields.
Can anybody tell me what are the exact master table vaidation i can do for the same!
<b>Order Type[VBAK-AUART],
Order Number[VBAK-VBELN],
Customer PO #[VBKD-BSTKD],
Sold-to Party No[VBPA-PARVW - SP as key],
Ship-to Party No[VBPA-PARVW - SH as key],
Division[VBAK-SPART].</b>
Agaist which master tables i need to vaidate above fields!
Also please clarify what is meant by [SP as Key] & [SH as key]! Is it needs to be defaulted!
Thanks in advance.
Thanks,
Prasad.

Hi Prasad,
For your another Query
SH- Ship To Party,
SP - Sold To party.
You can set anyone of them as Default depending on ur Bsuiness requirement ie. You are Forwarding ur Invoice to ship to or sold to Party.
Regards,
Leo

I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill f

I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill forms?

Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/

I have a question - Does Oracle BI in cloud has visualisation like Heat map, tree map , spatial map ? In general what are the additional visualisation as compared to OBIEE if any , thanks

I have a question - Does Oracle BI in cloud has visualisation like Heat map, tree map , spatial map ? In general what are the additional visualisation as compared to OBIEE if any , thanks

I have a question - Does Oracle BI in cloud has visualisation like Heat map, tree map , spatial map ? In general what are the additional visualisation as compared to OBIEE if any , thanks

What are the software required to have planning in my PC

Hi ,
I am planning to install "Hyperion planning" in my PC. Can any one suggest me what are the software i required to install the planning in my PC and let me have the clear information about installation process for each software.Please advice guys...
Note : Please include the version also
Thanks & Regards,
Prabhas

There are three ways to do this:
1) Install a server OS on the laptop. I tried this on an 8 gigabyte laptop and ran out of RAM for all of the things I wanted to do (SS, Calc Mgr, Essbase, EAS, APS, FDM, Financial Reporting, Planning, etc.).
2) Go to a VM solution, such as VMWare (I like VM Workstation, personally). Watch out for this on memory as 8 gigabytes isn't going to be enough. The Great and Good John G has recently published notes on how to set up 11.1.2.1's compact deployment mode. That might work in a laptop (yes, you wrote PC but nowadays that so often means laptop) -- I have yet to try it but have high hopes.
3) Go to the cloud. I personally prefer this as it is so easy and fast although you are paying a per-hour charge. Check out John Booth's blog: www.metavero.com for more details -- his blog links to mine for the instructions on how to launch that first EPM AMI.
Regards,
Cameron Lackpour

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

FICO:What are the critical reporting requirements of a finance department?

Hi Experts,
Can you help me identify all the reporting requirements of a finance departmentn when it comes to the use of BW?
i. From a reporting perpective, what does the finance department need from BI to say that BI is a worthwhile investiment?
ii. Does BI provide any of the answers provided in i. (above) through its business content objects? If so, can you discuss how BI provides each of the solutions? (I will apprecaite a discussion for the "finance team" and not neccessarily for the IT team)
iii. If all the requirements of a finance department are already available with a newly installed BI, then
what are the typical functions of a BI consultant to a finance department? i.e. why will a finance department find the need to bring in a BI consutant to advise them on how best to use BW in their environment?
iv. How does the above discussion pertain to CO. i.e. If your discussion above is strictly for FI, can you address i, ii, iii for CO?
Thanks and Happy Holiday.

Hi
From a reporting perpective, what does the finance department need from BI to say that BI is a worthwhile investiment?
Normally Financial reports needed for the customer will be P&L, Balance sheet, Cashflow statements and the AR, AP and also Controlling and the Turn over Ratios to know about the financial funding stage about their organization based on their functional requirements.
ii. Does BI provide any of the answers provided in i. (above) through its business content objects? If so, can you discuss how BI provides each of the solutions? (I will apprecaite a discussion for the "finance team" and not neccessarily for the IT team)
Better to talk to your FI CO team for this to understand better at ECC functional level to know what would be the best extractors that you can report on. BI content is already there for almost FI CO reports.
http://help.sap.com/saphelp_nw70/helpdata/EN/2d/955a73da4d6d41a0a6128caf274ce8/frameset.htm
and everything mentioned clearly in that why , how , what.
iii. If all the requirements of a finance department are already available with a newly installed BI, then
what are the typical functions of a BI consultant to a finance department? i.e. why will a finance department find the need to bring in a BI consutant to advise them on how best to use BW in their environment?
Though the Finance team has every Extractor at ECC side its only BI consultant who has to work on Modeling , Extraction, Reporting Part for BEx Reports. You have to Map the Fields even though its BI Content some of the Customized objects like Routines, Formulas would be there for each and every project .
iv. How does the above discussion pertain to CO. i.e. If your discussion above is strictly for FI, can you address i, ii, iii for CO?
http://help.sap.com/saphelp_nw70/helpdata/EN/d6/563b2203ef11d4a7400060087a7a87/frameset.htm
Hope it helps

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
Tools > Protection > Encrypt < Encrypt with Password
Answer YES to change the security.
A new window opens:
     Do NOT select Document Open (or that will require a password to open the document.)
     Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
     Change the following 2 settings from the drop-down box:
          Printing Allowed: Select High Resolution
          Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
          Leave selected: "Enable text access for screen reader devices for the visually impaired"
          Change Permissions Password (insert a strong password)
          Leave all other settings alone in "Options"
          OK - OK
          Re-enter the Permissions Password (the one you entered above)
          OK - OK
          Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

What are the "Add to Loop Library" requirements for creating automatically conforming loops?

I am trying to create my own loops that conform to the tempo and key of a song. I have made several loops in this way by selecting a region that is exactly 4 bars, for example, and then selecting "Add to Loop Library". If the sample is cut correctly, the "Type:" field is enabled which allows you to make it a Loop and therefore have it automatically conform to the song tempo.
In the past I have made loops that were very long, up to 128 beats, for the purpose of making mashups using instrumental tracks that I want to conform to the song. I now can't seem to create a large loop but I am not sure why. I know it is possible, but I don't know the steps I took to get there.
What are the exact requirements that allow a loop to be added to the loop library while also conforming to song key and tempo?

In the past I have made loops that were very long, up to 128 beats
The longest loop I managed to save as "Loop" had 55 measures (220 beats, 203 bpm). Longer loops could only be saved as "One shot". And the loop had to be cut at the end, not simply be trimmed by dragging the end of the region. The tempo matters; for a slow song the loop can only have fewer measures.

BAPI_SHIPMENT_COST_ESTIMATE What are the min. required parameters to pass

Hi All,
I would like to know what are the minimum required parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price).
What will be the item category it will pick. I like to see it picks basic price related item category.
Does any body has used this bapi ?
Appreciate your fast reply.
Regards,
Leona

Hello, I´ll try to answer your question:
1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
2. is it possible to perform estimation to inbound shipments ?
Yes it´s depend on the shipment type. In standard system 0010 is used
In the example that I have I use an inbound delivery
3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
I think that the bapi only run in simulation mode and it can not create any document
4. is there any problem if i customized my scd item categories to open manualy ?
I think that the bapi needs to work properly automatic iten categories
can you please post sample code ( or any other doc's ) for this bapi ?
I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
Best regards,

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

I have an requirement to map journal fields whats are the functions

Similar Messages

Maybe you are looking for