I have and iPad retina display but its not the lightning charger with can I change it ?

I have and iPad retina display but its not the lightning charger with can I change it ?

The iPad 3 with retina display came with a 10W charger. The iPad 4 with retina display comes with a 12W charger that you can buy.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/power  The iPad 4 charger can be used with any iPad model as well as iPhones and iPods.
 Cheers, Tom

Similar Messages

  • I have an iPad (retina display), installed 8 and now I am out of usage.  It shows I used 12.2 with 0 bytes available.  I have deleted most of my pictures, apps and still no luck.

    I Have an iPad retina display.  It worked great with 7 but I updated to 8.0.2 and now I have usage problems.  It shows my usage of being 12.2 and I have 0 bytes available.  It seems that this problem occurred after I installed 8.  I regret doing that.  Is there anything I can do?  I have cleared out most of my pictures and apps.  I am down to bare bones.

    A restart or reset might help. Either turn it off and restart it as stated above. Or give it a reset. Hold down the sleep and home keys for about 20 seconds, When you see the silver apple, let go and let it reboot.
    Then go into settings,general,  usage and see what's taking up the room.

  • I forget my password to my ipod and i have try to rerstart it but its not working what should i do?

    i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
      4. What to Do If You've Forgotten Your iPhone's Passcode
      5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

    Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

    Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

  • I have iphone 5 and enabled photo streaming but its not uploading

    I have iphone 5 and enabled photo streaming but its not uploading

    Howdy harsac,
    I have a helpful article about troubleshooting Photo Stream. Named iCloud: Photo Stream troubleshooting it can be found here http://support.apple.com/kb/ts3989.
    I would recommend this section:
    I don't see photos in Photo Stream on my iOS device.
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Regards,
    Sterling

  • My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

  • Changed ipad id online but its not changing it on my ipad..

    hey i changed my ipad id online but its not changing it on the ipad. how do i do that? as of now i cant even update the apps becasue the id and password dont match

    Try logging out of your account on your iPad by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6+) and then log back in and see if that 'refreshes' the account on it

  • My iphone 4 has no more storage capacity, i have deleted apps but its not freeing up any memory, can anyone advise?

    my iphone 4 has no more storage capacity, i have deleted apps but its not freeing up any memory, can anyone advise?

    Well if you have 3 gigs of music that is taking up half right there. Pictures and videos also take up a lot of space as well. Another thing is texts are saved on the phone. Try deleting them but texts don't nomally take up a lot of space.

  • My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • My iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

    my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

    AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!

  • HT4623 i updated my iphone and trying to activate but its not responding

    i updated my iphone and trying to activate but its not responding

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?

  • I have set up an account but its not letting me sign in. help!

    i have set up an account but its not letting me sign in. help!

    Try resetting your Apple ID password.
    Apple - My Apple ID
    Otherwise...
    Contact iTunes Billing:
    http://www.apple.com/support/itunes/
    Click: iTunes Store Account & Billing / Billing Inquiries / Email Us

  • My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

    My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

    OS X Mail: Troubleshooting sending and receiving email messages

  • HT4061 i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

    i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

    Hi there itiago,
    I would recommend that you take a look at the article below for more information on forgotten passcodes in iOS.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Hope that helps,
    Griff W.

  • I dropped my iphone 4s in water and now everytime i plug it in it show a charger pointing to a itunes thing i have tryed to recover it but its not working!! what do i doooo?!?!?!

    i was at the beach and was washing my shoes off then it fell in the water it was working alright but then it died and will not turn on and keeps showing the same thing i have tried to recover the iphone a couple of times but its saying the same thing.. do i have to go get it repaired if so how much... please help!!!

    If you are talking about the warranty from Apple that would have expired when your iPhone hit the water. So it doesn't matter. Just take it to Apple and purchase an out of warranty replacement for it.
    Allan

Maybe you are looking for

  • IPhone 4S not syncing with iTunes 10.7 Asking to restore

    I have had my iPhone 4S for about two years, and for a long while now it has been unable to sync with iTunes. My iPhone has the latest iOS, btw, and my iTunes is also up to date. When I plug my phone into my MacBook Pro, iTunes says that it does not

  • Indesign cs3 will not save after software update

    I have CS3 creative suite on my mac and sinnce the adobe updater for indesign was complete I can no longer save my files. I have tired reinstalling the full creative suite package but the software now crashes when I try to open a file this now as hap

  • What is the .ecore folder?

    I ran the command du -h --max-depth=1 / and just saw the folder .ecore. I would like to know what's it for (can't find this anywhere) and, also, which filetype is "s" (with ls -l the archives show srwx------ 1 root root 0 mar 18 22:40 0). Thanks. Las

  • Filters to specific Columns

    Hi, In my report, I would like to have a couple of measures, Variance and Utilization. For Utilization, I would like a rolling 8 week, so I filtered the report with 'Calendar rolling week' column from Date Dimension, filtered to BETWEEN -8 and 0. Now

  • EPM Architect not showing in Shared Services Application list

    I have installed and configured system 11.1.1.3 and created and deploy applications in Workspace using EPMA. However when I open the Foundation list, I do not see EPM Architect in the list. Is there something I need to do to create EPM in shared serv