I have Aperture 3 on my MacBook Pro..

Can I move it to an external hard drive without loosing all of the photos and the use of it?

Can I move it to an external hard drive without loosing all of the photos and the use of it?
What do you mean with "it"? The Aperture Application or the Aperture Library?
It is not recommended to move the application from the Applications Folder - the application should be installed on the System drive, but you can move the Aperture Library to an external drive, without losing your images. The APerture Library is a self contained package, that you can move with the Finder (assuming you have a managed library and not referenced master images).
If you do not want to loose performance, you need a fast external drive with a fast connection - fire wire, thunderbolt, the fastest you can get. Don't use a network volume to host your library.
If your Aperture Library is referenced, you might get a better performance by just relocating the master files to your external drive, and keeping the library itself on the system drive. This way you could still browse your library and rate and tag your images, even when the external drive with the master image files is off line. To achieve this, you have to use the "relocate master" command of the File-menu.
Regards
Léonie

Similar Messages

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

HT4007 How can I get Aperture onto my new Macbook Pro 15" Retina that DOESN'T have a superdrive from my 5 year old Macbook Pro? I still have the CD and serial number for Aperture. HELP! PLEASE!!

Like the thread topic says. I need help getting Aperture onto my new macbook pro that does not have a drive. I have no need for a drive after this to be honest just need my programs back on it. Thanks.

Two options:
Make a disk image or a clone of the installer CD on your Mac that has a super drive - you can create a disk image using Disk Utility or use Carbon Copy Cloner (if you have it) to clone the DVD to a thumbsdrive. Then run the installer on your MBY from this copy.
Or download the Trial Installer and install from there:
Download the Aperture 3.1 Trial. http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Open the Aperture Trial disc image.
Double-click the "Aperture Trial.mpkg" file.
Follow the onscreen instructions to install Aperture.
After the installation completes, choose Software Update from the Apple () menu.
Install the Aperture 3.4 update from the list of available updates.
Regards
Léonie

HT4906 just purchased aperture for my new macbook pro, do i know have to purchase again for my desktop?

just purchased aperture for my new macbook pro, do i now have to buy another copy for my desktop?

Use the AppleID you originally used when you bought Aperture. If you have forgotten the password, activate it again at the My Apple ID page:
(https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/)-iForgot,
see this link:
Apple ID: All about Apple ID security questions

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

How do I transfer Aperture to my new macbook pro?

Hi, I've just bought a powerbook pro (no optical drive) and I have aperture 3 on cd which I've installed on my iMac. How do I get Aperture 3 on my new powerbook?
Thanks

It is safer to install Pro Applications like Aperture by running the installer than migrating them.
Just for completeness's sake two more options:
You can also download the Aperture Trial installer - it will install the same version you are having on CD - download from here: Aperture 3.1 Trial
Then update it immediately from the Apple  menu> Software update, launch it, and enter your serial number(s). Don't try to launch Aperture on your libraries, before you have run software update.
Or, use Disk Utility to create a Disk Image from your CD and copy this to a thumbsdrive. Then open the disk image on your new Mac and run the installer.
Just in case, that you get an error message "check with the developer to make sure Aperture works with this version of Mac OS X" don't worry, some of the older installer DVDs give his error message, because a developer certificate expired. This easily solved by resetting the date before installing to a date before February 2012, see the thread below.
Re: Install failure for Aperture 3 on my MacBook Pro. Operating on Lion.
Regards
Léonie

SLOW going on Aperture 3.1 on MacBook Pro 1.83ghz

Ok so recently upgraded to Aperture 3.1 and it is as slow as molasses. Simple editing tasks not even in fullscreen mode are painfully slow--adjusting exposures, recovery, highlights, shadows, etc. I have to shutdown all other open programs and cancel all background tasks in Aperture i.e. thumbnail processing or whatever and still it crawls. The CPU usage in Activity monitor consistently shows between 100 and 180% when actively working on single images. Has Aperture outgrown my trusty MacBook Pro or is something wrong here folks? I upgraded thinking it would be better optimized for my older system but my post production times are seriously crippled. Any suggestions for what might be going on? Thanks in advance!

Your 2006 laptop is an early Core Duo before the Core 2 Duos. At 1.83 GHz clock speed and max of 2 GB RAM Aperture performance will be poor. Sorry.
As a frame of reference Geekbench ranks your MBP at about 2300, my slightly newer C2D MBP at ~3000, and a modern i7 MBP at ~6000.:
http://www.primatelabs.ca/geekbench/mac-benchmarks/
Looks like it is time for us to upgrade. Me especially, because even though it works, my box is full of hot chocolate...
-Allen Wicks

Install failure for Aperture 3 on my MacBook Pro. Operating on Lion.

I am trying to install Aperture 3 on my MacBook Pro. I am operating on Lion and my software is up to date. Any clues as to what is goin on? Do I have a bad disk?

Just a hunch: If you are trying to install from an installation DVD or older disk image, and you get the message
"check with the developer to make sure Aperture works with this version of Mac OS X"
you may have a problem with an expired developer certificate (they expired mid march).
To fix this, set the Date in " SystemPreferences -> Date&Time" to a date well before March 2012 and run the Installer again. If that succeeds and Aperture now runs , reset the date to te current date.
If not, please post back answer and Tony's question ....
Léonie

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

I have 8 gb on my macbook pro, but it sometimes only recognizes 4 gb. Whats going on?

I have 8 gb on my macbook pro, but it sometimes only recognizes one of the banks and thus only 4 gb. I was about to open my Macbook Pro mid 2010 2.66 up but it went back up to 8 gb of ram.
I also noticed that the macbook would go to sleep and not wake up again, sometimes. Not sure if this is related.
I did the usual, resetting the PRAM and the other thing with "shift control option." It didn't work and kept on saying 4 gb.
I woke up this morning ready to break open the mac when it read 8 gb. Great! But the **** is going on. Is that memory slot loose?
My google search and search through these forums were useless, no solutions. One guy tried changing his memory into the two banks, no difference. Sometimes it recognizes bank 1 sometimes it doesn't. Another put his ram in another computer, it's not the ram. Someone suggested the motherboard, then someone said "no way" for some arcane reason.
The only solution that seamed viable was going back to snow leopard, the last great OS. Im on mountain lion, not to shabby, but no leopard.
Problem is that I am out of warranty.
Any suggestion would be helpful.

why don't you try this:
open the back of your Macbook - if you're technically capable...
take the ram out, clean it up with a pencil eraser - blow it out - put them back in, slowly and in a slight angle until they lock into place - make sure they are seated correctly...
restart your macbook - if the same bank is still not detecting - then the issue is your RAM slot...
good luck

I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

I have just got a new macbook pro and want my itunes library on it.

hi, i have just got a new macbook pro and set it all up apart from my itunes library. yesturday i tried plugging in my ipad and iphone but this didnt work. i have tried clicking homeshare and have it turned on on both of my laptops but my itunes library has not synced. how do i transfer my itunes library?

MissGraceB wrote:
... how do i transfer my itunes library?
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

I have Microsoft Word for my MacBook Pro. How do I add a pdf to a word document, I have Microsoft Word for my MacBook Pro. How do I add a pdf to a word document

I have Microsoft Word for my MacBook Pro. How do I add a pdf to a word document, I have Microsoft Word for my MacBook Pro. How do I add a pdf to a word document

What do you want to do specifically. They are two different document formats - one is PDF, the other DOC or DOCX. In what way do you wish to "add" ad PDF to a word document. You can embed a mini version within a document (copy it and paste it from within the x.doc) but that's a pretty hokey looking solution.
Oh, its mostly irrelevant if its office 2004,8 or 11 - they all do this more or less the same way.
G

I have Aperture 3 on my MacBook Pro..

Similar Messages

Maybe you are looking for