I have ATT internet service at home and a 2Wire device. I want to switch to an airport extreme 5th generation and I am having difficulty. Looking for help.
I have ATT internet sevice at home and a 2Wire device. I want to switch to an 5th generation Airport Extreme and I am having difficulty. Any suggestions?
Yes, Bridge Mode is the correct setting for the AirPort Extreme when it is connected to another gateway, or modem/router.
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN port (circle of dots icon) on the AirPort Extreme.
Open AirPort Utility and click Continue to follow the guided setup to "create a wireless network" on the AirPort Extreme. The application should suggest Bridge Mode as the connection option during the setup.
Once you have the AirPort Extreme setup and providing a wireless network, if you don't really need the wireless network that the 2Wire is providing, it would be good idea to turn it off....since having two wireless networks in close proximity can introduce some interference issues.
Similar Messages
-
Airport Extreme 5th Generation and VDSL 2+
Hi Folks!
This question refers espicially to mac people in germany.
Is the Airport Extreme Basestation (5th Generation) good for using it with a VDSL 2+ DSL-Connection (50 Mbit/s) in a wired Network ?Yes, Bridge Mode is the correct setting for the AirPort Extreme when it is connected to another gateway, or modem/router.
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN port (circle of dots icon) on the AirPort Extreme.
Open AirPort Utility and click Continue to follow the guided setup to "create a wireless network" on the AirPort Extreme. The application should suggest Bridge Mode as the connection option during the setup.
Once you have the AirPort Extreme setup and providing a wireless network, if you don't really need the wireless network that the 2Wire is providing, it would be good idea to turn it off....since having two wireless networks in close proximity can introduce some interference issues. -
Airport Extreme (4th generation) and "Wireless Client Mode"
Hello All,
I am using an Airport Extreme (4th generation) and I wonder why in "Wireless Client Mode" I am unable to connect my network using the Ethernet connection.
Basically, what I wish to do is a bridge between a Base Station Wireless N <--> Base Station Wireless N (Airport Extreme) distributing the connection via its integrated Ethernet ports.
Thanks,
SebastianI wonder why in "Wireless Client Mode" I am unable to connect my network using the Ethernet connection.
The Ethernet ports are not enabled if you configure the AirPort Extreme to "Join a wireless network". Oddly, the USB port is enabled.
If you have another Apple "n" wireless router as your main base station, you could configure the AirPort Extreme to "Extend a wireless network". This would provide more wireless coverage and enable the Ethernet ports on the device.
Ironically, the less expensive AirPort Express 802.11n will do what you want.
When the Express is is manually configured to "Join a wireless network", there is a special feature to "Enable Ethernet clients", which will activate the Ethernet port. -
Solution: Airport Extreme (5th gen) and Comcast
Recentlty, I had a nightmare trying to install a new Airport Extreme (fifth generation) into a plain jane Comcast-iMac hardwire setup. Applicaton was to provide secure net for video streaming to Xbox and for printing as well as guest network for, uh, guests. After a struggle, I found both the problem and the fix.
Comcast modem direct wire to iMac was solid, but modem to Extreme WAN was no go with either wireless or wired connection between iMac and Extreme. After a few choice words hurled at the obviously incorrect "Ethernet cable not connected" message reported by the Extreme, it finally dawned on me to listen to what I was being told.
If the Airport Extreme couldn't see the cable going from its WAN port to the Comcast modem, then either my cable was bad or the two devices were "failing to communicate." I knew the cable was good (I tried both known good Cat 5E and Cat 6 ones), so it had to be the devices. Then, I remembered they first had to do a little dance (autonegotiation) to decide at which Ethernet speed (10/100/1000Mbs) to talk to each other. I found the settings page that controlled this process and switched it from Autonegotiate to 100Mbs Full Duplex and voila!
Comcast modem was Ubee DDM3513 (standard equipment for Comcast basic hardwire installation).
Hope this helps someone else.+1
Thanks for the info. This sure helped me out.
I have CableVision Optimum Broadband, and was experiencing the same problems.
Changed from autonegotiate to 100Mbs and boom, internet.
I wonder if it will be faster work with 1000Mbs... -
Airport Extreme 6th generation and Time Warner, Arris modem - no internet on mac
After installing a new Time Warner Arris modem we have encountered the following issues:
Light is green on the airport and everything appears normal
Wifi only works on iPhones, roku, and windows laptops.
Ethernet from airport extreme is also working (xbox one works fine).
Wifi internet does NOT work on Mac computers (we have two in the house both running Yosemite). The light on the airport is green and the macs can connect to wifi but cannot connect to the internet (DNS issue?).
The wifi on my mac yosemite laptop does work on my office wireless and anywhere else but home.
Backstory:
So a few months ago I purchased a brand new 6th generation Airport Extreme 802.11ac. It worked fine with our old generic Time Warner cable modem until we forced to upgrade to a new Arris modem/router combination this weekend to upgrade our internet speeds (I don't recall the model I can get this later). We told TWC that we did not need a router and would prefer to use the Apple router but they said it would work just as before by just plugging it into the ethernet port.
Initially we had network errors and I had to change from NAT to Bridge mode on the airport extreme and this worked for about a day. The next morning I could only get internet and wifi on my iPhone or a windows machine elsewhere in the house.
What I tried (none of these worked):
resetting the router and modem worked briefly but the problem repeated itself a few hours later or after connecting to a different wireless network.
deleting network config files (http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/).
deleting the wireless network from saved networks and connecting again.
Again this is a problem with mac laptops ONLY. I have no machines running an older version of OS X so I can't test that easily (I can borrow one from a friend to rule that out). We have 2 Mac computers both running yosemite and both have the same problem. Every other wireless device in the house works like a charm. Any ideas?(using a White, new Surfboard 6141 and Time Warner as provider)
This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem. -
Please let me know how I can set it up so it works along with my ethernet cables and downstairs network. I have several ethernet connections that I need to use as they are out of range of the network.
When trying to connect my AppleTV 3rd gen to another ethernet port of airport extreme with another faster (85mbps) Trendnet ethernet adapter via a different electrical outlet, my extreme goes from green light to flashing amber light and my wifi stops working.
If the Apple TV was originally setup for WiFi, I suggest that you reset the device back to default settings and then configure it again with Ethernet plugged in. Settings > General > Reset > Reset Settings
As a test, connect a spare Ethernet cable of any length (that you know is working) from the LAN <-> port on the AirPort Extreme to the Apple TV for the setup.
Setup the ATV again and double check to make sure that it is operating correctly
Change the location of the ATV back to the desired location on the network behind the powerline adapters
If you have a problem now, the first thing to check is the powerline adapter and or wiring -
Can you substitute the 30 for the 80gb drives in 5th generation ipod classics and visa versa?
iPod Classic, iOS 5 ???
Sigh! -
I'm trying to connect to a VPN (Buffalo Technology) from home over Airport Extreme (5th Generation)
Hi all,
I just purchased a 5th generation Airport Extreme to replace my home router. I previously had a Linksys wireless G which gave up on me. I've got a handful of computers that will be hooked up to the router. One of them is a Windows machine and it needs to be able to VPN into work. The VPN is a product from Buffalo Technology. I don't have much further information than that right now.
When I try to connect to the VPN it connects using "WAN Miniport (PPTP)" then verifies the user name and password then tries to connect to "WAN Miniport (SSTP)." The next message is "Connecting to _____ useing WAN Miniport (L2TP)'... When I get to this step a new window pops up and shows the following error message:
Error 800: The remote connection was not made because the attempted VPN tunnels failed. The VPN server might be unreachable. If this connection is attempting to use an L2TP/IPsec tunel, the security parameters required for IPsec negatiation might not be configured properly.
Any suggestions on how to fix this? I didn't have these problems on the other router when it was still in business. Thanks ahead of time for anyone who has suggestions.When I try to connect to the VPN it connects using "WAN Miniport (PPTP)" then verifies the user name and password then tries to connect to "WAN Miniport (SSTP)." The next message is "Connecting to _____ useing WAN Miniport (L2TP)'...
What this is telling you is that the Buffalo VPN client is attempting to establish a secure connection to your company's VPN server/applicance using each of the common VPN connection methods. Since it was unable to establish a secure connection, its attempt to create a VPN tunnel has failed.
Typically, IPsec is used to establish a secure connection. For IPsec to work through a NAT firewall, UDP port 500 (for Internet Key Exchange IKE) & UDP port 4500 (for IPsec NAT-T) must be opened. This is offered as IPsec Passthrough on most consumer routers ... except the AirPorts. That is because, by default, they already have these ports opened for VPN as they are known as "VPN Passthrough" devices.
I would ask your work's IT for assistance on how to properly configure the Buffalo VPN client to work with your new router. It may have been configured for the earlier router and those settings may no longer apply. -
Airport Extreme (last generation) and Airport disk
Simple quesion (I hope)...
does anyone know if one can do airport disk with a last generation (802.11g) AEBS?
Thanks,
BillAfraid not. The USB port on that generation is for printer share only.
-
I recently had to change the cabling for my house and since I would have to buy all new, I used CAT6a cables, and I noticed that they are all Shielded Twisted Pair (STP), which meand that they have an extra layer of protection against interferences. The RJ45 Connectors are all made of metal on these cables.
The main router in my house will be a 6th generation Ariport Extreme, and I noticed that on the Airport Connectors, there are to metal edges on the RJ45 female. Is that the groudinging for the STP cables? I noticed the same metal edges on the Airport Extreme 5th generation.
Thank you,Yes, but the power cable on the AE has no gnd pin so there is no actual grounding.. cables should only be grounded at one end anyway.. but the metal tabs are linked to the metal frame of the AE or TC..
At least in all the models up to AC .. it is still out of my reach cost wise. As I would have to pull it apart and plug my meter in there.. still they will eventually start coming in for repair. -
i dont have a internet connection at home, i connect my iphone 5 to my computer, it says i need new version of ITunes 11.2, i cant download it with out internet, i am at Library can i get ITunes 11.2 in a zipped files or exe file downloaded to my usb driv
i can take pictures off my phone but thats it, i have some nice programs for pictures and art work and cant get them back on my phone to send them to friends and family. Also have some OLD pictures of Family on this Computer that was given to me i want to get off of it and send out but i can dragg and dropp from phone to computer but i cant drag and drop onto phone from computer and there the same jpg files, sad. i like my iphone5 and want another one but i might have to change when it time to upgrade , i dont want to, but i cant afford internet let alone a mac or pc, this one was given to me, was lucky to have saved to get the phone and service on a family plan, i have unlimited internet on phone that is my life source for internet, wish io could afford both phone and internet, its phone or internet, and with phone i have both in a way
-
Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP. -
Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?
The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed. -
i have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Airport Extreme V5.1 and XP home SP3
I'm having some trouble sharing internet with Airport Extreme V5.1 and the router. My computer (XP home SP3) is always connected wirless to the airport extreme base but sometimes internet is not available. The router is set to be DHCP+NAT and the cable is connected to WAN port on the APE. With airport utility I've set the following:
Connect using: Ethernet
Configure IPv4: Manually
IP address: [one IP in the range sets in the router]
Subnet Mask: [The Subnet set in the router]
Router address: [Router IP]
Server DNS: [DNS sets in the router]
Domain Name: Blank
Ethernet WAN port: Automatic (Default)
Connection sharing: distribute a range of IP address
Someone can help me?I think I solve my problem changing the setting in "Connection sharing" to Off (bridge mode).
Maybe you are looking for
-
Updating itunes on mac os x 10.5.8
I need to download a newer version of itunes on my mac to put songs on my ipod, but whe i try to update itunes, it says i already have the latest version.
-
Why does my ipod gen 7 not charge or play?
my ipod nano gen 7 won't charge or play or connect to itunes
-
I just changed my skype name a week ago,because I update my cell phone & I'm sure that in the former account I have credit,please help with this matter adding it in my new account,contact me via email thanks
-
Configuration Support, Will Pay
I am trying to set up a SOHO office web server. The server is directly connected to my CISCO 877M router. I am trying to use CISCO Configuration Professional 2.5 or CISCO Configuration Assistant to configure the router but have run into problems and
-
i have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that