I have att u verse modem and it wifi was not working. So i got netgear wifi an d i connected my apple tv via ethernet cable to att uverse modem . i did not want slow dowm my wi fi speed. Now airplay is not working .

i have att u verse modem and it wi fi was not working. So i got net gear wi fi and connected to att modem . i connected my apple TV via Ethernet cable to att uverse modem . i did not want slow down my wi fi speed. My Apple phone is on Netgear wifi .Now airplay is not working .

Make sure that the Att Modem goes to the netgear router via ethernet cable. Then connect your Apple Tv with a ethernet cable to the back of the net gear router. Airplay wants it to both be connected to the same device, usually.

Similar Messages

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Connecting iMac to Network via Ethernet Cable and Airport Express

I've tried reading through the various posts to solve this and haven't had any luck. Any help is deeply appreciated.
I have an Airport Extreme as my main 'base' for our wireless network. I purchased an Airport Express today with the notion of using it to extend my network in the following way: I want to connect an iMac and a printer to the Express (using Ethernet and USB cables respectively) and have the Express serve as a remote for the Extreme base. I have found a number of websites saying this is possible, but none explain how to. I tried the WDS option, which failed to work. I later saw posts here saying that was not the optimal scenario. I'm afraid the 5Ghz/2.4Ghz settings combined with Airport ID addresses has pushed me past my competency!
Thanks in advance for your help and a festive St. Patrick's Day!

Temporarily, power down the AirPort Express and concentrate on the AirPort Extreme to make sure that it is functioning correctly, can get an Internet connection, etc.
A complete power cycle of the network is often useful when you have been making changes. Power everything off, order is not important.
Wait a moment, (or wait 5-10 minutes if you have cable modem), then power up the modem first and let it run a moment by itself. Then power up the AirPort Extreme the same way.
Check your settings using AirPort Utility - Manual Setup
Click the Wireless tab just below the row of icons
If the Wireless Mode setting is "Create a wireless network", make sure there is a check mark next to "Allow this network to be extended"
Note the exact setting for Security that is being used
Update to save any changes
Post back when the AirPort Extreme is functioning correctly as above and we'll tackle the AirPort Express

MacBook will not connect to the internet via ethernet cable anymore.

My MacBook apparently decided the other day that it no longer desired to connect to the internet through an ethernet connection; it still works perfectly through a wireless network. I am a university student and so there is wireless almost everywhere so it's not so bad, but I cannot connect in my dorm and it's becoming a bit of a pain. I have tried to connect through several known working ethernet ports and no matter what my computer thinks it's not even plugged in. It's even more strange because I just woke up one morning and it was no longer working. Everything else it totally normal, save this one little inconvenience. Any ideas?

So I'm having the same problem. I woke up one morning and my macbook's ethernet connection suddenly stopped working. For some reason It wont recognize the cable.... I have tried 3 different cables and theses cables work with my sisters PC so I know the cable is not the issue. Im also living in college dorms which seems to be a commonality with this issue. I've searched for answers all over and I really don't have the time to make it to the mac store anytime soon. My wireless works but it's not allowed in my college dorms for security reasons(lame). Please help!...
Apple needs to formally address this issue.

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

My camera and safari disappeared. I also have a passcode that I must enter and I can't remove it. These areas are grayed-out in settings as well.apple support said probably a software problem. But I didn't want to pay the $70 so I'll try this support

My camera and safari disappeared. I also have a passcode that I must enter and I can't remove it. These areas are grayed-out in settings as well.apple support said probably a software problem. But I didn't want to pay the $70 so I'll try this support

For forgotton passcode
http://support.apple.com/kb/HT1212
For missing icons, these must be somewhere in some folder. if you can't find
Use Settings > General > Reset > Reset Home Screen Layout.

I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?

I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?

Backing up and restoring your Profile should have included your bookmarks.
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
As far as working with that file in {like} NotePad goes:
A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
Or try using an online JSON editor like this, to try to display only the "uri" field.
https://www.jsoneditoronline.org/

I have a new ipod touch and whilst I was syncing with my computer I was asked if I would like to update, I did and now I have lost all software from my ipod touch. How do I retrieve it? My computer cannot find it. I am a new user so simple language please

I have a new ipod touch and whilst I was syncing with my computer I was asked if I would like to update, I did and now I have lost all software from my ipod. How do I retrieve it? My computer cannot find it

Try here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519Some of the music redownload is only available in the USA with the latest iTunes version.

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

I have att u verse modem and it wifi was not working. So i got netgear wifi an d i connected my apple tv via ethernet cable to att uverse modem . i did not want slow dowm my wi fi speed. Now airplay is not working .

Similar Messages

Maybe you are looking for