I have been taken over by a local network that has disabled my systems profiler and plug-ins. how do I break free?
I have been taken over by a local Network that has disabled my systems profiler and plug-ins. How do I break free?
If you are absolutely sure that this is the problem then you should turn the airport off.
Similar Messages
-
My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.
There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I have been taken over by "installmac" how do I get rid of it?
Help...."installmac" wont get off my computer
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there should be an item named "Genieo". Select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you couldn't complete Step 1, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client/u/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the developer sometimes shows up under the name "Genieo support." If that happens, don't believe anything he says, but feel free to tell him what you think of his scam. -
Network has been taken over by other program! please help...
hello everyone
I have an eMac and the problem is that, everytime that I am trying to access the Network tab in System Preferences, I get a message that it's been taken over by another application!
Can anyone help me on that? Is it a matter of permissions or something else?
Any useful commands or software to fix the problem?
Thanks in advance!I have a broadband connection with BT Internet via the BT Home Hub (i.e. router), but I also still have an old dial-up account with OneTel. I have had no trouble at all with my BT broadband connection, but one contact of mine persistently fails to receive e-mails from me and I wanted to conduct some tests, so I decided (amongst other things) to try my OneTel dial-up service, which I haven't used for a long time.
I immediately ran into the problem of the 'Your network settings have been changed…' problem. I rebooted — no improvement. I ran Disk Warrior — no improvement. I then tried the idea of mouse-over-lock idea and it worked. But what is more remarkable is that after I disconnected from OneTel (i.e. closed the internal modem down) and then tried again, it worked straight away, without the persistent error message coming up. Thank you very much for the 'mouse-over-lock' suggestion. Whether, after I have shut my computer down and restarted, the 'repair' will still be operatve, or whether I shall have to go through the procedure again, I don't yet iknow. -
I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?
Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.
-
I read that photos are not stored in the cloud until 1000 have been taken on my device's. Is there a way to force all my photo's to the cloud so they are not stored on my device's?
If you switch on your Photo Stream, then it will store any number of photos up to 1000 photos. No, you would have to manually delete them from your device if you want to, but the Cloud will only store 1000 as I say. When you get to picture #1001, then picture #1 will disappear, so I would recommend storing your photos somewhere else, like backing up on your computer of external HDD.
-
Traffic not showing in Notifications IOS 7. I have all turned on in notifications and location services allowed in Maps. I have been all over internet, followed set up instructions, even re-set settings (fixed weather not showing) but still no traffic?
I should clarify: I didn't know it fell out, but I check my phone often enough that there were only about 10 minutes between when I last put it in my pocket and then realized it wasn't there.
We asked everyone around us if they saw it, and like 10 people were helping us look. But my husband used Find My iPhone and the Prey app right away when we realized it was missing (again, at most 15 minutes from the last time I used it) and it was already in offline / "cannot locate" mode. -
i have been taken a backup but when i become to restore after update i found the backup corrupted and can't restore
unable to update or restore http://support.apple.com/kb/HT1808
-
Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
I have been trying for 24 hours to network two W 7 and a Vista Pre.
I have been trying for 24 hours to network two W 7 and a Vista Pre. The one W7 and the Vista can open anything the last W7 will NOT OPEN ANYTHING.
I get error code: 0x080070035 over and over and over.Not sure if this will help or not. I was trying to network W7 and XP a few weeks ago. I had been trying to name the network with my own name on both computers. Nothing worked until I changed the network name to the default xp network name for both computers. Then it all worked fine.
-
Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek RandallI don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.
-
Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
Photos have been found in the iPhoto Library folder that were not imported
Whenever I start iPhoto, I get an error that says:
5 Photos have been found in the iPhoto Library folder that were not imported. Would you like to import them now?
http://www.fredmccann.com/error.png
If I say no, the dialog goes away but you get it the next time you start iphoto. If I say yes, then iphoto tries to import something (I don't know what) and hangs. I've let it run for two hours and nothing ever gets imported. What's worse is that every time I try to let it import, it increments the number of pictures it thinks is missing. The first time it said 3 photos. I let it attempt an import and it froze. The next start it claimed there were 4. It's up to 5 now and I've figured out that letting it try to import whatever it thinks is missing is a bad idea.
Has anyone seen this problem before? Any suggestions?
iBook G4 Mac OS X (10.4.8)booleanman:
Welcome to the Apple Discussions. This Apple KB document may have the solution to your problem: Unimported photos found in Library when iPhoto is launched.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. -
can some one help me? I have been trying to update my MAC and it will not download because this message come up
(The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.)For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.
-
Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.
Now, iTunes won't launch and can't be updated. Please help.
If I have lost my music collection I will be switching platforms ASAP. It is insane that Apple has updates seemingly every day for their products.I was in your same situation with 14 downloads and 14 attempts.
You have to make sure that your Mac is booting into 64 bit mode. You can make sure of this by going into System Preferences and scrolling down to 'Software' and making sure that you are booding with 64 bit Kexts.
If not, restart while holding the 6 and 4 keys down until you see the spinning gear wheel and try installng again.
BUT, what I also did was to go into Applications, click on the Lion installer, Get Info, and give yourself custom priviliges to Read And Write.
I did this simultaneously, and I don't know what function did it, but it worked for me, with no further downloads of the installer.
Good luck!
Maybe you are looking for
-
Multiple screens for my nokia 5800 like N8
Hi, I am using Nokia 5800, but I am really impressed with N8's three screen which comes with Symbian 3 OS. Is there any way that we can upgrade Nokia 5800's S52 OS to Symbian 3 OS?? Because I wanted to have three screen combo..Its great thing we have
-
Remote Server doesn't display SPRY Tabbed Panel
I'm using DW CS4. I inserted a SPRY Tabbed Panel in the main page for navigation. The local development and testing server displays the Panel, but the remote server (Go Daddy) does not. All of the data from the panel is displayed in one log page w
-
Apostrophe gets changed to a ?
I am sending email by reading a .htm document (created from MS Word), placing it in a message body and sending the email in html format. I have a problem with the ' getting changed to a ?. For instance, the word "let's" gets changed to "let?s". I thi
-
Where do I find my serial number to reinstall my Photoshop elements 6?
Where do I find the serial number on my photoshop elements 6? I need to reinstall.
-
Regarding Function Module trace.
Hi, How are you ?. I need a help for Function Module datasources of how to get info of fields related to tables. I tried ST05 of SQL Trace but not showing complete picture and I heard through ST12 can do Function module trace to obtain table names. C