I have been thrilled to use file sharing for tv programs on my home pc and watch on the ipad, i am having trouble finding out how to sort programs in any correct order, any help?
I have been thrilled to use file sharing for tv programs downloaded on my home pc. I have not been able to sort the program list on the ipad2 to make the list appear in order of showtime or live appearence. Any suggestions?
I have been thrilled to use file sharing for tv programs downloaded on my home pc. I have not been able to sort the program list on the ipad2 to make the list appear in order of showtime or live appearence. Any suggestions?
Similar Messages
-
I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17 by 11 paper with the sections in the right order. Any help?
If all you are going to do is print double sided and them make
a single fold reducing the page to 8 1/2 x 11, one side of the
original 17 x 11 page will be page 4 on the left as you hold
the page facing you and page 1 on the right, reverse side
should be printed so top is same as top on the the first side
and will be page 2 to the left and page 3 to the right. Pick
up the double sided document with pages 2 and 3 facing you, fold
left edge to meet right edge; you should now have fold on the left
with page 1 facing up toward you, turn the page as you normally
would and pages 2 & 3 should be in order, and one more turn brings
you to page 4 and the fold should know be on the right. I hope this
explains clearly enough - if not, post back and some one should
join in with a better explanation. -
I have just bought a mac book air and set up the email account but it doesnt show my email sub folders and i cant find out how to do it can anyone please offer any advice.
Many thanks ToniThe warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!
Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original. -
I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?
If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads -
I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?
An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad? -
In the new iOS7, Having trouble figuring out how to forward text messages. Can someone tell me how to do that? Where the forward button. You used to be able to hit forward and put radio button on all the messages. The screen looks blank to me.
In the new iOS7, Having trouble figuring out how to forward text messages. Can someone tell me how to do that? Where the forward button. You used to be able to hit forward and put radio button on all the messages. The screen looks blank to me.
-
I updated my 4th generation Ipod touch, but now I can't find out how to restore it from my backup. I backed it up to my computer.
Can anyone help?iOS: How to back up and restore your content
-
All I want is to use my voucher and this is really annoying me I phoned your sercerity some time ago and answered there questions on the phone but the same questions on the iPad won't work I've been made to feel like a criminal it's a voucher not a bank account I had put voucher in before with no problems until this stupid question came up now I don't have there phone number I did phone someone but I think she had problems understanding English in not the criminal here I'm not the one holding my money you lot are
We are all itunes users just like you. We are not Apple.
You can reset your security questions.
Rescue email address and how to reset Apple ID security questions -
Having trouble figuring out how to use trigger inputs as a general purpose input.
I'm trying to use "Trigger 1" as a general purpose input to indicate the status of external circuitry. I can't seem to get the "Read High-Speed Capture Status" to indicate anything. I'm using the "Configure High-Speed Capture" VI with the capture mode set to Inverting Digital Input, and that VI feeds into a Do-While loop which contains the "Read High-Speed Capture Status" VI, which has the Ret Vect set to 0. I see from the online help that the High-Speed Capture function is available on Servo and Closed-Loop stepper systems, which I suppose is to enable the ability to read the position of the encoders. I'm using an open loop stepper system, so are these High-Speed Capture fun
ctions unavailable even though I'm looking only for status (Trigger 1), and not concerned with reading position? Thanks in advance, Rob.Thanks for the answer Ken. I'm going to try a different workaround. The global was too slow, and I think I'll break my subVI into two parts. I'll create a sub that has all the setup stuff in it, then embed the actual "check trigger status" loop in the main VI. The loop contains only 2 or 3 nodes. Too bad LabView works this way. I can see one reason it should, but another larger reason it shouldn't. Wishlist.... Oh, speaking of wishlist, I like the improvements that 6.0 has brought, but one thing still bugs me. There's no way to have LabView remember the place to look for files when it's first started. It defaults to "My Documents", which should be, as all LabView programers know "LabVIEW6\user.lib" (or whatever). Of course, once th
ere, LabView remembers for that session. Next time it's started, back to "My Documents" again. How 'bout fixing the "Options", "Path" settings so that it will actually remember the path set? Am I missing something here, or does it have anything to do with the fact that we're using Windows 98? My buddy's using NT, and his works the same. Is there a way around this? TIA, Rob. -
It all started when one day all of a sudden the heat was bad here, and I sat in the car with the AC on and my phone on the dash board, charging. Next thing that happened was that when I got home I let my son play with it (which he always takes good care of it, watching youtube videos) and then later on that evening when I payed attention to the back of it, it looked super swollen. You could see where tears in the white backing of my iPhone were from whatever had caused this. I thought it was from the heat, just expanding the case. Well, it had obviously got too hot in the sun on the dashboard and over a few hours had almost got to the point of exploding. I did not know that just a little bit of heat from the sun could do that, so anyways.
I ordered a new battery online and replaced that, in the process loosing two screws, the two at the bottom which hold the LED touch screen in place. Although it doesn't move without the screws, I do need to replace those also. Everything works fine. Buttons, touch screen, I just think there might be a small problem with the mother board, from the battery swelling and causing it to bend, or even heating the metal on it. That would suck, total bummer.. Anyways, anyone with a solution or even a bit of advice, or just a suggestion please feel free to help. I have taken it apart one last time after I restored it, and cleaned it very little with alcohol, thinking that might be a problem, but still nothing yet...
I hope I get this phone working again, not use for a phone, but for games, music, and videos. Thank anyone for your help! It's greatly appreciated!
HOLLYIf things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps. -
I have a Y9 Computer Science Exam next week and I know that this will probably be one of the questions on it so I need to know the answer. What is the difference?
An If statement executes once IF the statement is true:
If 1 = 2/2 Then
Textwindow.writeline("True")
EndIf
A While statement executes WHILE the statement is true:
While 4 = 2+2
'Will keep looping while it is true
EndWhile
A For statement loops a number in increment:
For i = 1 to 10
'Every time through, i gets bigger by one until it equals 10
EndFor
It is written: "'As surely as I live,' says the Lord, 'every knee will bow before me; every tongue will acknowledge God.'" Romans 14:11 -
Using file sharing between iMac and Macbook Air
I have been trying to use file sharing but do not have admin password or disc..When I try to access the iMac from my Air it give the option of using my Apple ID but no password field comes up...I press enter and get the Dialog Box wobble...
I have tried using the guest login but get the message "Access denied to this server, contact administrator". I can access the Air from my iMac but even though they are both running Mavverick some of the dialog boxes appear different. And thats even though I have enabled guest login on the iMac
-
How do i use file sharing with my microsoft pc and mac book?
I have a windows vista pc that my daughter uses and I have a macbook pro and we want to use file sharing for our itunes libararys. We connect to internet with my time capsule. I have both computers itunes file sharing turned on but I can't seem to be able to see them on the network. can someone give me some pointers on how to make this work. thanks
The best way I know is to sign up for iTunes Match. All your music is stored in the cloud and can be accessed by up to 10 devices.
-
I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
Maybe you are looking for
-
Hi, I am creating a table like this: CREATE tableA As SELECT * FROM tableA@DBLINK; And I get this error: ERROR at line 2: ORA-29275: partial multibyte character Thanks.
-
After downloading Mountain on my MacPro, just installing my MacBook Pro hard disk cracked
Please why?
-
Hi, I am doing unicode conversion of SAP programs. For the below code, I am getting error <b>"LS_RGUMD-RECORD_KEY" and "LS_GLU1" are not mutually convertible in a Unicode program</b>." DATA : LS_RGUMD type RGUMD. DATA : LS_GLU1 type GLU1. LS_RGUMD-R
-
November Quarterly Update for Developers
We've just opened up registration for the November 15th Quarterly developer update. Look for it at http://www.adobe.com/cfusion/event/index.cfm?event=detail&id=883099&loc=en_us This is a presentation tailored to developers for Adobe Creative Suite pr
-
Delta_avi_delta ......unknown source problem...
When i try to put in the lines that you posted on the forum, i manage to compile but when i actually read from the serial port, error occurs....The error is java.lang.NullPointerException at java.io.ByteArrayOutputStream.writeto(Unknown source) at Re