I have been unable to get services to load in finder. suggestions?
I open Services in finder - no services apply -services preferences. I selct services preferences, check the services I would like to see in finder. There does not seem to be an 'apply'or 'save' button. When i close the preferences, services in finder are still empty. What am I missing here?
Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian
Similar Messages
-
Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
I have been unable to get Photoshop Elements 11 to show in my Open With Programs
I have been unable to get Photoshop Elements 11 to show in my Open With Programs list. The program is installed but will not show in Open With programs.
Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian -
Telstra Air Signed up on the very 1st days but they have been unable to get me going.
As the title suggests, I am still waiting on my escalated query, of which I have contacted Telstra over since the 1st week of Air's introduction. All I have been told is that they get errors when they try to add me. They have never called me and have always left it up to me to query what is going on. (which I might add is nothing). Very disappointed with Telstra over this escalated query of which the only answer I repeatadly get is that it is escalated. DOH!!!!!!!No Air nor communication, very poor service, considering the time it is taking or not taking in between the techs coffee breaks. Been a long term Telstra customer and burnt like they just dont care.
I hear your frustration. Here's my journey so far: I've been a Telstra Cable Bigpond customer for a couple of years now.Heard about Telstra Air, and discovered the cable modem I had (CG3100) was not compatible.So I paid the $216, ordered and received a new CG6300 which is Telstra Air compatible (Telstra Gateway Max).Connected it up, then signed up for the service about 3 weeks ago.Got the message saying it would take 2-5 business days to complete.Didn't hear anything, so called them back a week later.They advised it's still processing, and we'll let you know when it's complete.Gave them another 2 weeks, heard nothing, so called them back again on Saturday.They said the name of my service was "an old name", and they're getting some error trying to activate Telstra Air for customers on this old named service.So that's what I've been told – there's some issue at the back end which is preventing them from upgrading me.So I feel like I've been conned in to purchasing a new modem (CG6300), even though my old modem (CG3100) worked fine ... the only reason I purchased the new modem was for Telstra Air. I've posted to other forums trying to find if anyone else had experienced the same and had a solution, but to no avail. Was even hoping that Telstra's customer service would call me even once, but I've had to call for an update every time. Even a call to say "we haven't fixed the problem, but we're still working on it and we haven't forgotten you" would go a long way. Very disappointed.
-
I have been unable to get the microphone working in any applications on my ipad.
I have the ipad model MD368X/A version 6.1.3
I have not been able to get the microphone to work in any application inc Sari.
Any ideas as the the location of the mic settings if any or am i looking at a hardware issue?
Looked for software updates for this model however indications that all is current.
Any ideas would be greatly appreciated
Cheersazjack169 wrote:
...my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps...
This is because the iPhone 5C does not have a motion coprocessor: a chip that calculates and records your motion like steps and distance. Your iPhone 6 has one (it's called A8). In this case your wife can use a Health supported third party app (like Nike+ Running) to report this data to the Health app.
Hope this helps! -
I have a black dialog box on my display that I cannot get rid of. I was cleaning my keyboard and must have hit some combination of keys that caused it. It shows text announcing everything I open on the display or am looking at. Can anyone help me turn this off? Thanks.
Hi there francone,
It sounds like you may have the Picture-in-Picture Zoom option enabled. Take a look at the article below for more information as well as how to disable it.
OS X Mountain Lion: Zoom content on the screen
http://support.apple.com/kb/PH11488
-Griff W. -
No setup screen when first starting apple TV
Hey Docbarb2,
You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
https://support.apple.com/en-us/HT202118
Change the language on your Apple TV
https://support.apple.com/en-us/HT202799
Take care,
-Norm G. -
I have been unable to get the health app to work
I have a iPhone 6 and my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps. I have them in the dashboard but nothing happens.
azjack169 wrote:
...my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps...
This is because the iPhone 5C does not have a motion coprocessor: a chip that calculates and records your motion like steps and distance. Your iPhone 6 has one (it's called A8). In this case your wife can use a Health supported third party app (like Nike+ Running) to report this data to the Health app.
Hope this helps! -
Ever since I upgraded my iPad to IOS6, I have been unable to get into my work email, which is through Google. No problems before update.
Downgrading to an older iOS version is not supported on iOS devices.
Make sure that you have downloaded all of the updates for your apps and see if that helps.
Try this as well. if the Apple apps are working OK and it is the third party App Store apps that are crashing - try downloading another app - any free app. See if that helps.
You said that you reset the iPad but you may have to restore your iPad to factory settings and then to a backup if you can't resolve the problem. -
Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?
Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?
Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards. -
Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!
Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!
-
Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
"apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?
Try deleting the iPod Photo Cache on your computer.
http://support.apple.com/kb/ts1314
Maybe you are looking for
-
I do not know why the notebook stopped recognizing the external mouse.
-
I'm a newbie to all of this...I have a new iPod 80G Video that I can not sync on my old computer. I had a 4g mini that I used and recently upgraded. When I first plugged in the new 80G to my computer iTunes goes through the process of initializing an
-
Nobody can watch my quicktime movie in iweb!!
I made two movies in iMovie and imported them directly into iWeb. I can watch them on my website and so can the apple tech people, but most importantly my professor cannot! I am the only one using a mac for this class - does anyone know if this could
-
here is the program I have: public class Freshman private String name; private int score; // constructor with no parameter public Freshman () { score = 0; // constructor with one parameter public Freshman (int newScore) { score =
-
Including multiple databases per connection
I have linked tables accross multiple databases and would like to include all applicable tables (from multiple databases) in a single dreamweaver database connection. Is this possible. I can't put all tables in a single database because one of the da