I have been using a jam classic wireless speaker on my macbook pro and all of a sudden it doesn't connect anymore. any idea whats wrong?
I successfully paired a Bluetooth HMDX Jam Classic Wireless Speaker with my macbook and have been using it for months. Then suddenly it will not work. Has anyone else had this problem. It isn't the speaker. The best buy guys tested it and it still works with other devises. Got any ideas?
Hello there, BeckyBoyette.
The following article offers up some great Troubleshooting Tips for issues with Bluetooth:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
I have ipod 120 classic. I have been using genius on my ipod to create playlists on it.All of a sudden Genius does not show on my ipod or function. Should I reset ipod? Jim34
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
Is there anyone noticing a sync problem in iOS5 across their devices?
ok it took me a few days to get to the bottom of this one. basically what you have to do is wipe your phone then restore it from icloud. before doing so you need to back up entire phone to icloud. Below I have pasted the instructions given to me by apple rep. I went through all the steps and I now have reminders back and working. ACtually I only needed to go through the steps on the first link. Not sure why I was given the second link. Previously stored reminders are gone but i do remember seeing another post somewhere that said how to get those back once the application is no longer frozen. I am going to try that next. anyway here are the instructions to wipe and re-install.
One final note, the rep said when i updated the os I should have done it through the usb via itunes rather then through wifi which I did. She said when updating via wifi you sometimes get anomolies such as this.
instructions from apple below.
http://support.apple.com/kb/ph12521?viewlocale=en_US
http://support.apple.com/kb/ht1414 -
I have ms office 2011 for mac. I cannot open the "word" program. Everything else powerpoint and excel works just fine. The problem is with word only. The icon just bounces until I force quit. I tried to reinstall, repaired permissions, etc. please help.
Try posting on the MS Office for Mac user forums - here's a direct link to the Word forum - http://answers.microsoft.com/en-us/mac/forum/macword.
It might be that you just need to update. Do you have the Office updater set to check for updates every week or so? Note that the updater actually only works when you restart or cold boot.
Try the forum - they've always been very helpful for me...
Clinton -
Is there something I can do at home to fix it? I don'y have time to bring it to the apple store.
If you don't have time for the Apple Store then put the computer in a closet until you do. Then make a Genius Appointment and take it in for service.
-
hi I cant conect m iphone. it went black dead sudently. Im charging but no reaction at all. The bottons dont react. its dead? what to do???.
Plug it into a wall outlet for at least 20 minutes, then try doing a reset by pressing and holding the Home and Power button for 20 seconds.
-
I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.
Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I have been using a WD Passport with Time Machine on my iMac. Since I upgraded to Mavericks, the backup no longer works. What do I need to do?
I assume that upgrading the WD SmartWare is irrelevant as it is not being used. Should I upgrade just as a precaution?
One complication is that I have renamed my user since the last time I backed up.the problem is with the WD Passport drives. I also have one, and since upgrading to 10.9 I can no longer use mine either. See if this solution works for you: https://discussions.apple.com/message/23943103#23943103
-
I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".
Mac Book Pro - 3.1-15-inch 2.4/2.2GHz), Processor 2.2 GHz Intel Core 2 Duo
Operating system : OS X 10.10.1
Time Machine Version 1.3, Copyright 2007-2014 Apple Inc., Modified Tuesday, September 9, 2014 at 6:03 PM
Time Capsule: 500 GB C 2007
This Time Machine software worked satisfactory until Monday Nov, 10 2014 and I have backups until that time. For several years, the software deleted the oldest back up to save the latest one. This is acceptable to me as I have off site storage that is updated every 3 months. How do I get Time machine working again?I have spent a couple of days trying to respond to Linc Davis. Finally I figured it out . The following is a copy of data from my console from the initiation of a time machine backup until it gets stuck trying to calculate the time remaining. There is no indication that anything starts saving. I copied about 3 minutes of data. This is probably way too much data, but I do not know what is relevant.
Thanks for the help,
calcool
12/22/14 3:16:54.655 PM com.apple.backupd[551]: Starting manual backup
12/22/14 3:16:55.057 PM com.apple.backupd[551]: Attempting to mount network destination URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:16:57.262 PM mds[33]: (Volume.Normal:2464) volume:0x7fed5ab54000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Time Capsule
12/22/14 3:16:57.565 PM com.apple.backupd[551]: Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:17:08.000 PM kernel[0]: hfs: mounted Backup of “name” “lastname”’s MacBook Pro on device disk3s2
12/22/14 3:17:09.625 PM com.apple.backupd[551]: Disk image /Volumes/Time Capsule/”name” “lastname”’s MacBook Pro (2).sparsebundle mounted at: /Volumes/Backup of “name” “lastname”’s MacBook Pro
12/22/14 3:17:11.112 PM com.apple.backupd[551]: Backing up to /dev/disk3s2: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb
12/22/14 3:17:24.931 PM “name”[593]: audit warning: soft /var/audit
12/22/14 3:17:24.944 PM “name”[594]: audit warning: allsoft
12/22/14 3:17:24.958 PM “name”[596]: audit warning: closefile /var/audit/20141222201654.20141222201724
12/22/14 3:17:26.544 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
12/22/14 3:17:34.767 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
12/22/14 3:17:34.768 PM com.apple.backupd[551]: Reading cached event database from: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/F85FEA51-E137-471A-84DA-A2C00E4ECB42/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:38.115 PM com.apple.backupd[551]: Using cached disk scan
12/22/14 3:17:39.114 PM com.apple.backupd[551]: Saved event cache at /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/5BC46A53-25E8-4C4A-8947-AFB221D1FA0C/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:39.355 PM com.apple.backupd[551]: Not using file event preflight for Macintosh HD
12/22/14 3:19:14.782 PM CoreServicesUIAgent[294]: unexpected message <OS_xpc_error: <error: 0x7fff77befc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff77beff70> { length = 18, contents = "Connection invalid" }
}>
12/22/14 3:20:15.207 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:17.267 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:17.884 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:18.483 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:21.646 PM com.apple.metadata.SpotlightNetHelper[310]: [SLSUGGESTIONS] Location managed failed with error Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
12/22/14 3:20:23.892 PM WindowServer[143]: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
12/22/14 3:20:26.526 PM WindowServer[143]: common_reenable_update: UI updates were finally reenabled by application "Spotlight" after 3.63 seconds (server forcibly re-enabled them after 1.00 seconds)
12/22/14 3:20:28.298 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:29.094 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[599]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.294 PM com.apple.InputMethodKit.UserDictionary[600]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](808): CoreData: Ubiquity: “name”~00000000-0000-1000-8000-001B63947FCF:UserDictionary
Using local storage: 1
12/22/14 3:20:32.317 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.769 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:34.580 PM Console[601]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/22/14 3:20:35.540 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/22/14 3:20:36.388 PM com.apple.xpc.launchd[1]: (com.apple.auditd[604]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
12/22/14 3:20:36.693 PM “name”[608]: audit warning: soft /var/audit
12/22/14 3:20:36.718 PM “name”[607]: audit warning: allsoft
12/22/14 3:20:37.045 PM “name”[610]: audit warning: closefile /var/audit/20141222201724.20141222202036
12/22/14 3:20:37.438 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: Invalid Connection ID 0
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.612 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot.log>, it will probably fail
12/22/14 3:20:42.613 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot.log, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot-syms.log>, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot-syms.log, it will probably fail -
I dropped my iPad mini on the floor, but it was not at all a big drop and landed firmly but the lightning cable inside my iPad cracked and from now on I have been using my sisters iPad charger(the same as old one) and now it take 4 hours to charge 8% HELP!!
It sounds like the drop damage more then just the lightning adapter.
I suggest you take it to Apple and ask them to check it out for you.
Allan -
Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.
Hi a,
http://www.mctiviausa.com/
There has been "talk" on and off of Apple TV doing it (and people have done it with a hack), but I haven't really followed it.
It would be a whole lot cheaper getting an adapter (as needed) and cable and simply pluggin it in when you're in the kitchen. -
ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
How can I have the same environment on two macs on is a macbook pro and the other a Mac mini
How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?
Forget trying to use iCloud for this - it won't do what you want. iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.
Maybe you are looking for
-
Error while running ant build script from cmd line -ORABPEL-01005
Hi to all, I am newbie to BPEL, I did a sample application SyncHelloWorldBPEL application in Jdev and I deployed it application server everything looks good. When I ran the same ant build script from command line it throw me bunch of complation error
-
Hello Friends, I want to write perform on commit. but can anyone tell me what is the syntax whils writing it as perform? and while writing form and endform. it's urgent , plz.
-
Spotlight searches are totally worthless (incomplete)
spotlight seems to be totally randomly selecting files to match, regardless of the search. as a simple test, i can search for my name, or the word "the", or the word "email", or other things which should produce thousands of hits. In almost all cases
-
Plz chk my country and oprater
plz chk my country and oprater
-
After reading so many complains on version 1.1. And some users are not affected and some were. Just one of my tots, is that a server end problem or client side problem? Is all our iWeb pages with special functions like the counters, comments that pub