I have been using Logic Pro 8 on my Macbook OSX 10.5.8 Recently I purchased a new Macbook OSX 10.7.3 but cannot install Logic Pro 8 on it. Do I need to purchase a new Logic Pro 9 or can I upgrade my Logic 8 to logic 9 and then install?
Is there anyone out there who is having the same problem.
Pancenter wrote:
Thanks ... for posting a method that works.
UPDATE:
The photo posted above is Logic Pro 8 running in Snow Leopard virtualized in Parallels 7 in Lion.
I just attempted to install it into the Lion Macintosh HD from running the Logic Installer in Snow Leopard virtualized. The Installer application does NOT see the Lion Macintosh HD in its Select a Destination window. More work needs to be done for this approach to work...
Any ideas?
In the meantime, someone will have to work out an installation method using Pacifist (as CCTM suggests above), similar to this approach to installing GarageBand Jam Packs into Lion (which installer also requires Rosetta):
http://www.bulletsandbones.com/GB/FAQPages/InstallJamPack10.7.html
Similar Messages
-
I have been using Photoshop Elements 11 photo merge function. However, the Photomerge panorama function is no longer accessible - it is visible but greyed out on the "enhance" menu. I have tried to reinstall software, but no change.
Click on Expert and the Enhance>Photomerge>Photomerge Panorama should be available
-
What should I do? Can I use the Windows XP disk, or do I need to get a replacement which works with Windows 8.1?
Eugene Dryden
[email protected]It probably won't work, but you can give it a try.
Upgrade here (although you may be able to find a full version less expensively at an online store or a retail store):
Buying guide: version comparison | Adobe Photoshop Elements 13 -
I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?
no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing. -
I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.
Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios
EExactly what settings are you using. Some go to iTunes.
-
i have been using adobe acrobat 11 pro, and now i want to download it to a new laptop and insert my serial number, but i can't download it, any help?
Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
If the link provided does not work, explain more detail regarding why you say you cannot download. -
I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not there. How do I add additional options and get my preferred signature style back?
Hi Amanda ,
Which version of Acrobat are you using?
Which signature style are you talking about?
You can go ahead and try uninstalling and reinstalling it and see if that works for you .
Use the cleaner tool to uninstall it .Here is the link.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
You can refer to the following link to re install it .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards
Sukrit Dhingra -
Hi there and hello everybody.
I am writing a book and have been using Libre Office and would like a better word processing package.
I have heard that Pages 5 is better than the latest one. I need to be able to put my Libre Office documents
into Pages. Anyone know how to do this please?magathon wrote:
Thanks. So would you say Word is the best processing package? And how do I choose which package 'opens' them.
This is a basic computer skill you might want to learn. You can always control which application opens any document, and the steps below apply to any Mac or Windows computer you use:
Method 1: Drag the document icon on top of the application (Word, Pages, LibreOffice...) icon and release. The system will open the document in the application you dragged it to.
Method 2: Go into the application (Word, Pages, LibreOffice...) and choose File/Open. Locate and select the document, and click the Open or OK button.
Method 3: Select the document icon and choose File/Open With, then choose the application you want to open the document with.
The only time these don't work is when the application cannot open that type of document. For example, you usually can't make a photo editor open a text file. But Word, Pages, and LibreOffice all know how to open text files, RTF files, and Word files.
But if it is important that the document formatting is exactly preserved when exchanging with other Word users, you really should use Word. If you can't afford to pay the retail price for a copy, Microsoft now lets you use Office for $6.99 a month or $69.99 a year. -
My macpro got wet and I have been using my boyfriends macpro to charge my iphone over the weekend, his itunes is an early version of my itunes library. I have no music showing in my ipod on my iphone. When I plug it in to the macpro it shows my music, and an up to date show of all my playlists new music etc when I click on my iphone icon, how do I get it back? Can I back up and sync from his library? Can I just back up my phone on his library and restore from that, will I get an exact copy, new stuff and all back??
Any help appreciatedSounds like the music you had on your phone was not the same music on his computer. The iPhone/iPod touch is not designed to be a storage device. When you sync with a computer that doesn't have your music, it deletes your music from your phone.
Was this music you purchased from iTunes? if so, and you are in the US, tap on itunes app, tap updates, tap purchased and tap on the cloud icon to get each song back. If you're not int he us, get iOS5 update later this week and do the same.
But you need to move your itunes library to his computer. Create a user account on his macbook pro for you. From your external drive backup, load your itunes library on it. Then sync as usual! (Don't tell me you don't have a backup for your computer!) -
Just edited 20 film in FCPx all about 6 mins long all on 1 x 250gb flash drive
Now i have another 10 to do but have no room on that drive.
So i have been using my new 2tb drive to do the next 10 films with the footage on that drive, but i need elements from the first 20 films ie; graphics, common film elements etc to be added to the new 10 films.
So I have copied all the footage, events and project folders from the 20 edited films over to my 2tb drive in a separate folder - ejected the 250gb drive (as i only have 2 thunderbolt slots and one is used for a 27 inch monitor on my macbook pro)
.......my question is how do i load all of the 20 films into my project library so i can see all of the 30 films at once so i can copy and paste form one film to another - is this possible? and withlout messing up lol// any reason, why you color your post to 'invisible' low contrasted colors?? //
I'm confused:
by concept, there's Events and there's Projects.
Events and Projects can be internal or on any ext. drive.
You can use any Event in any Project.
… so, why is the 'location' of your files on any relevance for your Projects ??
Or, do you want to re-import done-Projects as 'Events'? Export,Import, done… (??)
… sorry, maybe I'm just lost intranslation -
Have been using good ole cannons from 70 h 80's for years.Need to update and understand new technolo
Have been using the cannons for many years mostly scenic areas. Quit using them eight years past.
I am retired and need to update and understand what you have so l can start over.Thanks for your help, Edgar.Hi Edgar,
While there are occasional Canon tech wizards on here to help out, mostly it's conversations among Canon users.
You are basically wanting to go from film to digital, which can be both easy and very, very complex. Some of the modern DSLRs can be used in a highly automated, almost "point n shoot" manner. Or you can get as involved in using them as you wish, using less of the automation, usually with more consistent and pleasing results... but a much steeper learning curve.
If your Canon are from the 70s and 80s, they are manual focus lenses and cameras with the FD mount. Some of those were fantastic, but simply aren't usable on modern Canon, which use EF mount. So you are most likely starting from scratch.
I'd recommend one of the more entry-level models, perhaps with one or two kit lenses to get started learning to shoot digital. But it sort of depends upon your budget, how much you want to spend. I don't know where you are in the world... I'm in the US so below I'm refering to the current US model designations Canon offers (and international designations are in parens). All these models are "EOS".
The Canon Rebel T3 (1100D) is the most entry level model. If bought in kit, it usually comes with EF 18-55mm lens.
Rebel SL1 (100D) is a very compact camera, in kit usually comes with 18-55mm lens.
Rebel T3i (600D) is a bit larger and adds some features... in kit it's often offered with 18-55mm, or sometimes with 18-135mm, or sometimes in a 2-lens kit with 18-55mm and 55-250mm.
Rebel T5i (700D) is the top of the Rebel series line and mostly adds features related to videography. It can be found in kit with the same options as the T3i.
EOS 60D is a mid-grade model, using a true pentaprism (the Rebel series use a penta-mirror). With higher top shutter speed (1/8000 vs 1/4000 on the Rebels), somewhat different controls (more direct access to things commonly used by more advanced photographers). The 60D is being discontinued right now, but you will still see a lot of them in stores.
All the above have essentially the same "APS-C size" 18MP sensor (except T3/1100D which uses a 15MP sensor). T5i and 60D have a similar, more advanced autofocus system.
EOS 70D is the new model that's replacing the 60D, has a new 20MP sensor, as well as a more sophisticated autofocus system than any of the above.
60D and 70D in kit usually come with 18-135mm lens, but sometimes there are alternatives.
The EOS 7D is the top of the line APS-C size sensor, a fairly pro-oriented camera with less support for new digital shooters, a sophisticated and fast autofocus system. .
Finally there are also and so-called "full frame models EOS 6D, 5D Mark III and 1DX (sensor is 24x36mm, same image size as most 35mm film cameras shoot). The 6D is essentially an entry-level, more compact full frame model. 5D Mark III is a mid-grade model, and the 1DX is an uber expensive pro-oriented, high speed model. You might be tempted by these initially, coming from film cameras. But be aware they not only cost more initially, are a bit more limited in lens choices, plus the lenses for them will generally tend to be larger, heavier and more expensive. The APS-C or "crop sensor" models can use all EF and all EF-S lenses. While the "full frame" models can only use EF lenses. EF-S lenses are specifically designed for crop sensor cameras. EF lenses were designed for film or have been designed for full frame, but are also fully usable on crop cameras. So, crop cameras can essentially use any lens Canon has made since around 1990 and onward.
I'd recommend you start with one of the crop sensor models.... graduate later to one of the full frame models, if you find that necessary. Today's crop sensor cameras are actually quite capable. You can make a pretty large print from them, with little loss of image quality. You'll just have to "re-think" focal lengths, from what you are accustomed to. For example, a 50mm lens on a crop sensor camera is no longer a "standard" lens. It acts more as a short telephoto, like an 80mm would on your film cameras (nice for portraits). If you want a standard lens on a crop sensor camera, you'll want something around 30mm. The 18-55mm kit lenses, for example, cover approx. the same angle of view range as a 28-90mm zoom would on your film cameras.
Now, seeing that you are an experienced SLR user, you probably don't need the automation and newbie support of some of the most entry-level models. But also going from manual focus to autofocus (which, when used right is faster and more accurate than I ever was with manual focus, and I was pretty good!)... I'd suggest starting out with one of the simpler AF systems.
The T5i or 60D might be good choices for you. Go compare in a store, if at all possible.
Just as was true in the days of film, lenses still tend to make more of a difference than the camera they are used upon. In other words, the entry level kit lenses might be a low cost way to get into modern, autofocus, digital cameras... but if you're budget allows you might want to consider some more advanced lenses. In the kit lenses, I would recommend the "STM" (stepper motor autofocus drive) models... they are the latest and greatest. But there are even better, in particular the USM (ultrasonic motor autofocus drive) which are often found in otherwise upgraded lenses. For example, for crop cameras there are the EF-S 10-22mm, EF-S 15-85mm USM, EF-S 17-55/2.8 USM and EF 70-200/4L USM lenses. These are fast and accurate focusing, with top quality optics. Most of these lenses also have or are optionally available with Image Stabilization (IS), which is great and allows handheld shots that were near impossible with your older gear. Highly recommended.
Shop around and don't forget to allow some room in your budget for other necessities. You'll need memory cards (the entry level models and T5i, 60D that I recommended all use "SD/SDHC" memory cards). You also might want a spare camera battery (most entry level models use LP-E8, the 60D uses the larger LP-E6 to get about twice as many shots per charge). There are also accessory battery grips available for most models mentioned, which give secondary controls that are nice when shooting with the camera in portrait orientation, as well as adding a second battery to double the number of shots you can take. Most of the lenses mentioned don't include the lens hood, which I highly recommend buying, too.
All these Canon cameras come with a complete software suite, all you really need to get started cataloging and editing your images on your computer (some other manufacturers sell certain softwares separately). However you still might want to look into some third party softwares. Adobe Elements is an excellent and affordable introduction to Photoshop, which is arguably the "big daddy" of all image editing softwares. There are others... some cheaper, even some free... and you don't really need to rush into adding softwares unless you simply want to. The included Canon software is fine to get started.
I guarantee you will find yourself shooting a lot more digital images, than you ever did with film. For one, after the initial cost of the camera, lenses and basic gear, you will feel like "shooting digital is free!". It's not really (camera and memory wear out eventually, upgrades come along, and digital storage & backup fill up rather quickly). But it's certainly cheaper than shooting film. Last time I shot a lot of film I figured it cost a minimum of 50 to 75 cents per shot (common 35mm film with local, consumer grade processing, 4x6 prints or contact sheets... $15 to $20 per 36 exposure film). Digital reduces that to around 5 cents per shot, on average.
You'll also love high ISO shooting with your new DSLR. Any of the above cameras can be used at ISO 1600 with much better results than any film at that rating. With a little extra work, ISO 3200 and 6400 are quite usable... perhaps even higher! I rarely use lower than ISO 200 now, where with film the bulk of my work was at ISO 50 and 100.
You also will enjoy the immediate feedback you get being able to review your images on the spot, right on the LCD screen on the back of the camera. The histogram, in particular, is very helpful once you learn to use it. Heck, you can even shoot tethered to a computer and see your images full size on a computer monitor immediately, if you wish... Or download them and view them just minutes after pressing the shutter release button!
Get some books about digital photography. In addition to something more general, I also highly recommend getting one of the guide books specific to whatever camera model you choose. That will complement the manual that comes with the camera. If you get an image editing/cataloging software, I'd recommend a book specifically for that, too. Another book I recommend is "The DAM Book - Digital Asset Management for Photographers"... which can be found and bought online. It's very helpful setting up your "workflow", and the sooner you do that, the better (it's the pits having to go back, reorganize and potentially redo thousands or hundreds of thousands of images).
There are also good online tutorials about many aspects of digital photography. For example, I highly recommend the three half-hour videos on YouTube about Canon autofocus systems and how to get the best results with them... beginning with this one: http://www.youtube.com/watch?v=iAx86nblZ2g This is a few years old now, but still quite relevant... the 50D is discussed at length, but it uses an AF system that's virtually identical to the 60D, for example. It also might help to know some of the features of the more recent, more spphisticated AF systems, which are discussed a bit. There are other videos and online tutorials at the Canon Learning Center, on YouTube, and elsewhere. Some are model specific... such as the AF system of the 7D (which is largely carried over into the 70D now).... and the even more advanced 5D Mark III/1DX AF system.
Other users here and at other forums online can be a big help, too. Don't be afraid to ask questions (we've all been there at one time or another).
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM -
i have been using my mac book pro for more than 11 months.
.My use is pretty safe as i use it only at my home and do not carry it to office...
my confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth itLike any other insurance, it's only worth it if you have a problem. I've purchased it on my "high risk" Macs and not purchased on the others. So far I've never needed it.
-
I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".
Mac Book Pro - 3.1-15-inch 2.4/2.2GHz), Processor 2.2 GHz Intel Core 2 Duo
Operating system : OS X 10.10.1
Time Machine Version 1.3, Copyright 2007-2014 Apple Inc., Modified Tuesday, September 9, 2014 at 6:03 PM
Time Capsule: 500 GB C 2007
This Time Machine software worked satisfactory until Monday Nov, 10 2014 and I have backups until that time. For several years, the software deleted the oldest back up to save the latest one. This is acceptable to me as I have off site storage that is updated every 3 months. How do I get Time machine working again?I have spent a couple of days trying to respond to Linc Davis. Finally I figured it out . The following is a copy of data from my console from the initiation of a time machine backup until it gets stuck trying to calculate the time remaining. There is no indication that anything starts saving. I copied about 3 minutes of data. This is probably way too much data, but I do not know what is relevant.
Thanks for the help,
calcool
12/22/14 3:16:54.655 PM com.apple.backupd[551]: Starting manual backup
12/22/14 3:16:55.057 PM com.apple.backupd[551]: Attempting to mount network destination URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:16:57.262 PM mds[33]: (Volume.Normal:2464) volume:0x7fed5ab54000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Time Capsule
12/22/14 3:16:57.565 PM com.apple.backupd[551]: Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:17:08.000 PM kernel[0]: hfs: mounted Backup of “name” “lastname”’s MacBook Pro on device disk3s2
12/22/14 3:17:09.625 PM com.apple.backupd[551]: Disk image /Volumes/Time Capsule/”name” “lastname”’s MacBook Pro (2).sparsebundle mounted at: /Volumes/Backup of “name” “lastname”’s MacBook Pro
12/22/14 3:17:11.112 PM com.apple.backupd[551]: Backing up to /dev/disk3s2: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb
12/22/14 3:17:24.931 PM “name”[593]: audit warning: soft /var/audit
12/22/14 3:17:24.944 PM “name”[594]: audit warning: allsoft
12/22/14 3:17:24.958 PM “name”[596]: audit warning: closefile /var/audit/20141222201654.20141222201724
12/22/14 3:17:26.544 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
12/22/14 3:17:34.767 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
12/22/14 3:17:34.768 PM com.apple.backupd[551]: Reading cached event database from: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/F85FEA51-E137-471A-84DA-A2C00E4ECB42/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:38.115 PM com.apple.backupd[551]: Using cached disk scan
12/22/14 3:17:39.114 PM com.apple.backupd[551]: Saved event cache at /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/5BC46A53-25E8-4C4A-8947-AFB221D1FA0C/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:39.355 PM com.apple.backupd[551]: Not using file event preflight for Macintosh HD
12/22/14 3:19:14.782 PM CoreServicesUIAgent[294]: unexpected message <OS_xpc_error: <error: 0x7fff77befc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff77beff70> { length = 18, contents = "Connection invalid" }
}>
12/22/14 3:20:15.207 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:17.267 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:17.884 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:18.483 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:21.646 PM com.apple.metadata.SpotlightNetHelper[310]: [SLSUGGESTIONS] Location managed failed with error Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
12/22/14 3:20:23.892 PM WindowServer[143]: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
12/22/14 3:20:26.526 PM WindowServer[143]: common_reenable_update: UI updates were finally reenabled by application "Spotlight" after 3.63 seconds (server forcibly re-enabled them after 1.00 seconds)
12/22/14 3:20:28.298 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:29.094 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[599]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.294 PM com.apple.InputMethodKit.UserDictionary[600]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](808): CoreData: Ubiquity: “name”~00000000-0000-1000-8000-001B63947FCF:UserDictionary
Using local storage: 1
12/22/14 3:20:32.317 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.769 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:34.580 PM Console[601]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/22/14 3:20:35.540 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/22/14 3:20:36.388 PM com.apple.xpc.launchd[1]: (com.apple.auditd[604]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
12/22/14 3:20:36.693 PM “name”[608]: audit warning: soft /var/audit
12/22/14 3:20:36.718 PM “name”[607]: audit warning: allsoft
12/22/14 3:20:37.045 PM “name”[610]: audit warning: closefile /var/audit/20141222201724.20141222202036
12/22/14 3:20:37.438 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: Invalid Connection ID 0
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.612 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot.log>, it will probably fail
12/22/14 3:20:42.613 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot.log, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot-syms.log>, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot-syms.log, it will probably fail -
I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?
Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.
-
I have been using my husband's apple id in my old PC (ID A). When I purchased a MacBook Pro, I created my own Apple ID (ID B) and started using my laptop and updating the S/W with this ID.
Because I wanted to have access to my old purchases, I changed my Apple ID's e-mail to another e-mail that my husband uses (ID B->ID C).
Then I changed my husband's original Apple ID's e-mail address to my own e-mail address (ID A->ID B).
Now I can't update any s/w through the Apple Store and I get the message that "Sign in to **********@hotmail.com to update applications for that account.". The e-mail address is ID C. How can I associate my laptop in the AppStore with ID B which is the one that have all my purchased applications and contains my own e-mail address?
I would appreciate your reply.
DimitraYou are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...
Maybe you are looking for
-
No data found error while creating po using interface
Hi all, I am a beginner in Oracle applications. I am trying to create a PO and line using interface tables. I am getting the below error when I run my concurrent program: I do see my records in my staging tables and in PO HEADERS INTERFACE and PO LIN
-
Time Machine disk servicing 2 machines
I have a 500 gig disk servicing 2 machines, an Imac 20" desktop and daughters macbook. She is off to college 500 miles away and her 2 year old hard drive failed. It is being replaced by local apple store under warranty plan. I found out from trying a
-
Runtime Error while creating FINANCIAL STATEMENT VERSION
Hi Experts, The major concern of the problem is related with the new creation of FINANCIAL STATEMENT VERSION. (SPRO --> IMG --> Financial Accounting --> General Ledger Accounting --> Business Transactinons --> Closing > Document> Define Financial Sta
-
some data might have been lost'. Eventualy when it opens it loads very slow and not displaying brightly as it should. My music equally not loading at all, as the phone always conduct auto search of music and podcast without adding any musi c. This is
-
Check duplicate items in two sharepoint lists
Hi, I have 2 separate sharepoint lists, both contrain user names. e.g: Jan Jaap. I want sharepoint to automaticly compare those lists to see if there is any name in both lists and notify me about it. For example : List 1: Firstname | Surname