I have BIS but can't surf, send/receive email, use apps

i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi.  also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc.  They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them.  aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs. my carrier says i have active data plan/BIS. but under Services Status..it says Blackberry Internet Service:  Connection:  not connected...
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS.  i have registered my HRTs several times... and resending my service books... same thing...
the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
my sister and i have the same BB... i removed my sim and inserted it to her BB and the BIS worked fine... i was able to surf and use apps.. but when i put my sim back on my phone, the problem still exists.  i even used a different sim card that is also subscribed to BIS/data plan, and it still has the same problem... my guess is my carrier is right that my data plan is working ok and that my handheld itself has the problem... 
i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... numerous battery pulls... same thing... i can receive the HRTs and service books, but after that can't do anything else like i used to... (send/receive emails, use apps like facebook, twitter, ym, etc., can't surf with internet browser - except when wifi is on everything else work fine even emails and apps).. 
i would really appreciate your help guys.. thanks!

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • I have BIS but can't send/receive email, surf with internet browser

    i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi.  also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc.  They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them.  aren't these supposed to be running through BIS only?
    I have GPRS on top, not gprs.
    so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.
    i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS.  i have registered my HRTs several times... and resending my service books... same thing...
    -My carrier has not reported any data outage.
    - I'm in an area where I've had RIM data services (for months now). It has always been working well. I've never really had any problems with my BIS until 4 days ago when it just suddenly stopped sending/receiving emails, surfing through internet browser, using facebook, twitter, ym apps, etc.. 
    -the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
    -i've read somewhere that it may be some application error or something, so I've wiped out my BB thrice now, deleted all third party apps, everything is clean i guess, but still I end up with the same problem.
    -i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... same thing...
    can you help me out with this? i have tried battery pull, wipe out and OS reinstallation lots of times but same problem happens... 

    Hi tarifiq and welcome to the BlackBerry Support Community Forums!
    Can you send me a private message with your PIN so I can check this out for you?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to setup embarqmail settings. I have not been able to get or receive email using embarqmail.  I have talked with apple rep and he could not get it to work. Can anyone tell me what to do?

    I have not been able to get or send email with my embarqmail account. I have been told to put host as pop.centurylink.net and and stmpcenturylink.net and server port 587. If anyone can help me please let me know. Thx

    Try here:
    iTunes Store: My credit card's security code or zip code does not match my bank's records
    Then try contacting iTunes
    Apple - Support - iTunes - Contact Us

  • After using as modem, can no longer send/receive email. Any ideas why?

    My IT department recently upgraded the service to include use of Blackberry as a modem.  That works fine...the problem is each time I connect to the computer, it somehow wipes out my setting on the once I unplug,   I'm on an Enterprise Server so each time this occurs, my IT folks have to reset my password.
    Sprint had me erase the "Service Books" on the phone and then gave me a new one but that did not work.
    Thanks in advacne!

    I suggest backing up your device, then preforming a clean application load of the device software. To do this see the article below:
    How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
    http://www.blackberry.com/btsc/KB11320
    Hope this helps.

  • Since installing OS Lion update on July 4th I can no longer send/receive email on my MacBook Pro yet my iPhone is still working.

    Any idea why?  Or what to do about it? Thanks!

    tanafrombc wrote:
    Any idea why?  Or what to do about it? Thanks!
    No, because you didn't provide any details

  • HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)?  That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both?  Or more?
    I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
    Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details.  The BT email client set-up starts here.

  • Why can't I send an email to a "group" if I have a group in my address book??

    Why can't I send an email to a "group" if I have a group in my address book??

    You are not doing anything wrong. Unfortunately, that's just the way that the built in mail app works. It really is a basic no frills mail app with not much to offer compared to other apps.
    There are third party apps that let you create groups and email to those groups. I don't use either of these, but I've seen them recommended here in the past.
    MailShot
    http://solubleapps.com/mailshot/
    Group Email!
    http://www.redbits.com/iphone/groupemail/

  • I changed nothing in my email account but can no longer send emails on my talktalk account and get the message, "authentication required." I am running Mavericks on my MacBook Pro. I can receive messages on talktalk. Can send

    I changed nothing in my email account, talktalk.net, but can no longer send (server's response, "authentication required) No problem receiving, I am using Mavericks on my MacBookPro. No problem using Cloud, but I want to use my talktalk account as before the problem
    I can send and receive using talktalk without any problems using my iPod and iPad.
    I would be most grateful for help - in simple form, please, I am an 80 plus female Mac lover!

    Hello Hazel139,
    I found this in one of the similar post hope it helps you.
           Level 6 (14,190 points)             
    X423424X 
    This helped meRe: Problem SENDING email     Jun 17, 2012 1:40 PM    (in response to Casanewton) 
    The error I see is you did not specify the proper authentication for the smtp server.
    In the Mail preferences for the account, smtp popup, select Edit SMTP Server List.  A sheet will drop down.  Select Advanced tab on that sheet.  You should, I assume, set the Authentication to password, and set the proper username and password.  That's where the poper would be set if 587 is not the one you should be using.  Maybe it is.  I only bring it up since I see it trying to use port 587.
    If you got this stuff already set correctly then I don't know.  Mail has a problem in your setup.  Maybe delete the account and recreate it from scratch.
    https://discussions.apple.com/message/18670442#18670442

  • Somehow my MacBookPro iCloud account has a different name and password from my other devices.  Even my date of birth is listed incorrectly.  I have tried but can't seem to change this info to match up with my other devices.  Can someone help?

    Somehow my MacBookPro iCloud account has a different name and password from my other devices.  Even my date of birth is listed incorrectly.  I have tried but can't seem to change this info to match up with my other devices.  Can someone help?

    Thanks
    I have a PC (Windows 7)
    Not sure when mobile me changed, but it was this weekend that my storage etc. lapsed (I have paid to keep storage with icloud). So i assume this has something to with it stopping.

  • Just bought mac 10.8.4 I have cs5extended but can't install cs2 to upgrade my cs5extended copy, help

    Just bought mac 10.8.4 I have cs5extended but can't install cs2 copy to upgrade my cs5extended copy, help any idea's please :-)

    You can install CS5 directly on your computer.  You will be asked to enter an eligible serial number during the installation process.  This is when you will want to enter the CS2 serial number.

  • I have iWork but can't find the Numbers application, should I reinstall iWork?

    I have iWork, but can't find the Numbers application.  Should I reinstall iWork?

    Yes, Numbers should definitely be included.
    Check your install location as well, and search for the application in Spotlight.
    Numbers.app

  • I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

    I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

    Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.

  • How can I active  send by email button in reader

    Send by email button works perfectly in acrobat pro. But it does not work in reader.
    How can I active send by email button in reader?
    Please Suggest me......

    Thanks to join  in this field.
    I have got answer.

  • Send mHTML email using publication but without dynamic recipients

    I need to send the content of a report as part of the email body. I have used Publications to achieve the same. However, I do not want to use Dynamic recipients as I need the same email with the same content to go to the same list of people like a normal schedule.
    I tried not configuring the dynamic recipients and only put an email in the Destinations section but that didn't work.
    Is it possible to send mHTML emails using publication without using dynamic recipients?

    I thought you could send a publication anywhere, but I'm not sure you can - I think you have to specify recipients - either Enterprise or Dynamic.
    The 3.x admin guide says:
    ...which kinda points that way.
    HTH
    NMG

  • My Apple ID is my old email and I want to change it  but can't because my rescue email is my current one.

    My Apple ID is my old email and I want to change it  but can't because my rescue email is my current one. How do I change it?

    There are instructions on this page for how to change your rescue email address (you may need to log out and back into your account before trying to use it as your main address) :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.

Maybe you are looking for

  • Itunes crashes on 10.1.0.56 after a few minutes

    I am technically unsophisticated but here goes. Itunes crashes 3-20 minutes after start. I subscribe to several podcasts but this seems to happen whether itunes is downloading or not. I am buying a new computer soon so I want to minimize the effort h

  • Sequential read of DD03L table is taking forever during SP install

    Hello SDN I'm applying some SP to my vanilla ECC install with Max DB. Whenever I apply another set of SP or even SPAM update it inevitable hits a sequential read of table DD03L. And it takes forever to go throught it. It is a 1.5 Gb table. I updated

  • Killing reports in queue

    All too often a report job hangs in the queue. When I cancel the job, I get confirming messages, but the job remains in the queue (current jobs), The only way I have found to remedy this is reboot the machine the server is running on. So far I have b

  • Entity remote in clustered http session ?

              we put a entity remote object into a http session which is replicated           across a cluster of 3 linux machines ( each with 1 weblogic 6.1 SP2).           http session replication works fine: the entity is accessible on every          

  • Custom method to activate and de-activate custom fields.

    Hi All, I have appended 3 fields on sap std structire incl_eew_pd_item_csf_sc. The requirement is by default the 3 fields will be not active.The custome fileds will only be changebale if G/L account of thr item is maintained in table ztable.so i need