I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by I tunes. In fact it says that I have used maximum number of user accounts. Kindly help me in this matter.

I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by apple store and I tuned.
It says that I have already used maximum number of user accounts. Kindly help to resolve this problem.

Hello Renvin29,
It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Or you can just erase it remotely outright:
iCloud: Erase your device
http://support.apple.com/kb/PH2701
You should also take a look at this article for additional info on what to do about this situation:
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • TS3988 When I try to sign in to my iCloud account, I get a message saying that The maximum number of free accounts has bee activated on this iPad. Can I get round this problem ?

    When I try to sign into my iCloud.i get a massage saying that The maximum number of free accounts has been activated on this I pad. Please can you tell me how to get round this problem ?

    All you can do is re-use on of the accounts previously created on your device, or create an account to use on another iOS device or Mac (running OS X 10.7.2 or later), if you have one.

  • HT5622 How can I get on ICloud when it say the maximum number of free accounts has been activated on this iPad?

    How can I get on iCloud when it say the maximum number of free accounts has been activated on this IPad?

    A maximum of three new iCloud accounts can be created on a single iOS device. If you have already created three iCloud accounts (why?) then log in using one of those to start using it.
    Otherwise, you'll have to find another device to create an iCloud account on.

  • How to create another apple ID account if I have a maximum number of free accounts?

    How to create another apple ID account if I have a maximum number of free accounts?

    See this previous discussion.
    icloud: The maximum number of free...: Apple Support Communities

  • ICloud Error! The maximum number of free accounts has been activated on this iPod touch.

    This is seriously annoying, I've been going around in circles trying to get my music onto my bloody iPod. I can't sync because it pauses @ Step 4: Waiting for changes to be applied error for ios7 devices. So my only option is to use iTunes Match and pay 40 bucks for it, but I think for iTunes match, you also need an iCloud account. Well I can't! Because when I go to sign into my iCloud using my Apple ID, it pops up with this error: The maximum number of free accounts have been activated on this iPod touch.
    I'm about to give up and kill every one of Apple's employees.
    I'm ready and open to everyones strategy at getting this fixed, thanks in advance.

    So I go to make a new Apple ID, then go to my newly downloaded iCloud Control Panel for PC, and it says that this is a valid Apple ID but not an iCloud ID. I figured the only way to make an iCloud ID is to make an account on my iPod... BACK TO THE START! I can't because it gives me an error after I have created my account saying: "This device is no longer eligible for creating a free iCloud account"
    WHAT IS GOING ON, fix your stuff Apple.

  • HT1369 My Ipod account is saying that my ipod is synced to a differnt account, please help.

    Hi there.
    I have been having trouble with my Ipod nano. It was working great for the first few months, and it was simple to download, and sync songs to it. But it suddenly began to say that my ipod was synced to another account. I have tried to run the diagnostics, and the results are attatched. I did have to connect my ipod to my cousins accont back a few months ago, because we needed the songs for school.  Those were the last two songs I purchased. I was able to upload music off CD's after that, then it started giving me this message about my account being synced to another account. I tried syncing it anyway, but it gives me the option to either delete the previous syned information, and I can't do that, because I purchased $50 worth of songs, and I can't loose them. If anyone can help me, Id' be very grateful.
    Olivia.
    ( Here's the Diagnostic tests results. My Ipod was plugged in the whole time.)
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Acer Aspire 7741
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00D8AC1C0C3AD258
    Current user is not an administrator.
    The current local date and time is 2012-07-24 12:51:59.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive F: Novatel Mass Storage Rev 1.00 is a USB 1 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {EFA9F465-07F2-4F59-AD2A-46FBE5317F65}
    Description:            Verizon Wireless - VZAccess
    IP Address:             75.207.43.230
    Subnet Mask:          255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:      No
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:         66.174.71.33
                                    66.174.95.44
    Adapter Name:        {5DDD3447-D384-4069-9337-524C482C43BE}
    Description:            Atheros AR5B93 Wireless Network Adapter
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:        
    Adapter Name:        {379810E1-DDC2-4B05-9656-FD959C2A355C}
    Description:            Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:        
    Active Connection: Verizon Wireless - VZAccess
    Connected:             Yes
    Online:                    Yes
    Using Modem:        Yes
    Using LAN:             No
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-07-24 11:39:51.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    OLIVIA (H:\), iPod nano (6th Generation) running firmware version 1.2
    Serial Number:       DCYGRS51DCMN
    Bus Speed:             61440
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Please help! It's like I've completly lost my entire account, including the movie I bought.

  • ICloud Cannot Sign in the maximum number of free accounts has been activated on this iphone

    Hello,
    I got a iPhone 4 that has reached creating the limit of 3 accounts, im not trying to make a new account, but i just want to login to icloud and use the fin d my iphone feature, but when i try to login it gives the the cannot sign in error. im not trying to make a new account. im just trying to sign in my iphone using an existing Apple ID (Apple ID is not iCloud)
    Any help?
    thanks guys

    Copied from my initial post:
    "Then you will have to use a computer to create another account, or re-use one of the accounts you have already created."

  • What is the maximum number of user accounts that can be logged in at once?

    How many users can be logged in at once, using Fast User Switching (FUS)?
    Ideally, I'd like an "official" answer from Apple, or if someone can refer me to "official" Apple documentation that answers this question, that would be fine.
    I think the answer is 10 but need to know for sure.
    Thanks in advance!
      Mac OS X (10.4.9)  

    You may be right about CLI vs GUI differences...
    Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
    When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
    The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
    The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
    Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
    And again, this obviously isn't "official" in any way.

  • What is the maximum number of user accounts that IMS 5.0 supports?

     

    This sort of determiniation is based on several factors like:
    - What access protocol is being used? (IMAP, POP, or Webmail)
    - How often users check their mail
    - What sort of hardware the server is running on.
    - The network connection from the clients to the server.
    - Is LDAP on the same system as iMS.
    -Chris

  • HT3939 Hi there I've got an iPhone 5 starting to get electric shocks of fone when I leave it on charge! Can you help me in this matter! Fone is constantly over heating the shock I got off phone really hurt! So please can u get intouch on

    Hi there I've got an iPhone 5 starting to get electric shocks of fone when I leave it on charge! Can you help me in this matter! Fone is constantly over heating the shock I got off phone really hurt! So please can u get intouch on
    <Edited By Host>

    This is a user forum and is not Apple.  I would definitely recommend that you stop using your iPhone and take it to be checked.

  • Hi , I have recently bought an second hand iPhone 4 , Now most of the thing on the iPhone you  need iCloud ,i try logging on to it but when i do it say The maximum number of free account have been activated on this iPhone, i don't know what to do. Help

    Hi , I have recently bought an second hand iPhone 4 , Now most of the thing on the iPhone you  need iCloud ,i try logging on to it but when i do it say The maximum number of free account have been activated on this iPhone, i don't know what to do. Help

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this?

    I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from there, but it won't let me do that. It is forcing me to set up on the iPod. Am I doomed to have no iCloud account because I opted for a used device?

    See this previous discussion.
    icloud: The maximum number of free...: Apple Support Communities

  • I have an account in Apple Astor was not able to access it, please help me in this matter

    I have an account in Apple Astor was not able to access it, please help me in this matter
    <E-mail Edited by Host>

    What to do if your iPhone will not turn on

  • HT203390 even when i insert my sim card it says insert your sim card kindly help me in this regard i cant use my phone

    even when i insert my sim card it says insert your sim card kindly help me in this regard i cant use my phone

    Sounds like the phone was jailbroken or hacked to unlock it. Was it?

  • I am new to the ethernet communicat​ion using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

    i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
    Solved!
    Go to Solution.

    Hi thanks for the help.
    Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
    Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
    Attachments:
    Client.vi ‏62 KB
    Server.vi ‏252 KB

Maybe you are looking for

  • SQL Developer objects not showing DDL

    Greetings! First time posting here on the Oracle forums, so hopefully I can be as specific as possible :) I'm having an issue with displaying the SQL that makes up an object, specifically a VIEW. Here is the scenario: I log on as an IT user - WDSQUER

  • The Best Tool For Multiple Animated Objects

    Hi, I am expirimenting with Flash Web Sites, and I would like suggestions as to a starting point for my project, and I am assuming a Flash website is where I would start. Basically, If I were to open up a web page, I would like to see multiple animat

  • I'm searching for version 9.2.0.5.0 oracle 9

    Hello, I hope I can help. I'm trying to find version of Oracle 9.2.0.5.0 for Linux (CentOS), I've searched for several days on the web, but nothing, also look in the oracle site, but neither could find only documents the regard. I have a newer versio

  • Compile error of LabVIEW C code in vxworks 5.5.1/tornado 2.2.1

    Ladies and Gentlemen, I am trying to run a LabVIEW-generated C code {Calling a LabVIEW-built DLL in C to Acquire, Analyze, and Present Data (http://zone.ni.com/devzone/cda/epd/p/id/1515)} in VxWorks 5.5.1. However, I have the following errors in usin

  • Bookmarks not syncing on iPad after iOS 4.3 update

    I have the following problem since the iOS 4.3 update on 2 iPads and 1 iPhone 3GS. (no problem on iPhones 4) If I attach device to iTunes and start syncing, everything seems synced except the bookmarks. I get either messages: 'iTunes could not sync b