I have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you
i have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you.
The seller needs to follow this procedure:
http://support.apple.com/kb/TS4515
If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
Regards.
Similar Messages
-
wat if i have lost my iphone and the person delets my icloud ID and enters his own new one can i still look find the phone using Find my iphone using my earlier ID or will it not pick up my phone as he changed the Icloud ID which was associated to me ID
if someone deletes icloud or even if you wipe phone it is not traceable anymore.
-
How do I reset my Iphone if the person i bought it from did not turn off "find my Iphone"
I bought an Iphone from someone since my old one broke and my 2 years are not up yet. I want to reset it but itunes says to turn off find my iphone first but it doesn't let me without signing in to that person's account which I do not know.
iCloud: Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7 -
i just got an ipod 5 and the person that had it before has it link to there apple id and didnt give me a password i did a hard reset and nothing happen it still asking me for a password how do i bypass that cause i want to start useing it
Funds cannot be transferred from one Apple ID account to another.
Try here > Rescue email address and how to reset Apple ID security questions
If that doesn't help, contact Apple for assistance with your security questions > Contacting Apple for support and service -
I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!
The built in camera app. But all the apps do not allow me to save any photos as well.
-
Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely. Has anyone noticed this?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?
Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
Most commonly used backup methods
Things to consider before upgrading OS X -
I have an iPad 2 and the newest apple tv. I do not get the option to turn mirroring on in the AirPlay function. I have tried the suggestions I've seen on here so far, but nothing has worked. Has anyone come up with a fix to this problem?
Your Apple TV and iOS device (iPad) need to be on the same network subnet. If they are you can verify when playing that the ATV is set as the output device by clicking the icon to the the right of the fast-forwrd button. Or you can double-click the home button and swipe left twice to see this.
-
I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help
Hi,
The Buddy's Audio can get dropped completely if the speed of your Internet connections are vastly different.
For example the minimum speed for a 1-1 video chat is only 128kbps Upload (As Downloads tend to be faster).
Where I live in the United Kingdom I can only get DLS. This is further subject to the distance to the Exchange.
DLS at less than 3.5 km can be done at 20Mb at most exchanges.
At some exchanges there is roll out of some Fibre optic services.
In most larger towns and cities there is normally the option of a Cable service that offers similar figures.
In some parts of Sweden you can get 100Mbps services.
When the speed from your ISP varies a large amount then iChat will drop Frames to smooth out the Video
There comes a point when so many frames are dropped that the Audio will not make sense and will be dropped.
At about 128kbps a 5% variance will take you below the 100kbps mark (after allowing for the actual connection overheads)
At 10Mbps that 5% variance can be (in round terms) 500kbps
(A 500kbps service is itself good enough for a 4 way Video chat)
My experience is that PC users on AIM tend to only send the Pic at 10 frames a second (Fps). Any slower than this and the picture losses it's smoothness and flow.
You may see different Speeds and Frame Rates when you Call Out compared to when others Call In.
Setting the Bandwidth Limit to a lower figure such as 500kbps (fast enough for 4 way chats) may get around any variances in the speeds you see in the Connection Doctor during a live chat.
7:43 PM Friday; June 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have 3 songs that will not download and the volume of error messages from Itunes about these "3" is annoying. I know my way around Itunes but cannot find a way to delete them and stop these Itunes download error messages.
Thank you.Thanks Mohammad - much appreciated.
I also got a response from Apple who said that there was a problem related to fonts and the encryption.xml file
Once we'd removed this we were able to upload the epub no problem.
It's odd that the system seems to say that all is okay when it isn't. We have to rely on guesswork rather a lot using iBook Producer.
Anyway, all sorted now and thank you again for your contribution.
Best wishes and a Happy New Year!
Sue -
I have lost my iPhone 4s and i had it turned off when I laid it down somewhere and I have not installed the find my iPhone app. Is ther anyway possible to locate it.
Nope. If you didn't have find my iphone turned on, you will not be able to locate it. File a police report, and contact your carrier.
http://support.apple.com/kb/HT5668 -
Lost my iphone and the person who stole it turned it off
i was walking to my friends house and had my phone in my pocket. i didnt realize i dropped it on the way there until i arrived to his house (im stupid af ik!). so when i got to his house i used find my iphone through his phone. someone found it and headed to their home. i saw my the device moving throughout the map. the persons location is not far from mine. i tried calling and calling but no one would answer. i played sounds on it and put it on lost mode, prior to which asked to me to put a phone number so the person can contact me in. i placed my dads number and left a message. 2 hours later i check back on it and its still in the same location but this time it appared offline and it said "old location" which means this person has turned off my phone. could this person possibly have restted my phone??? i dont know what to do! its currently appeared offline for 2 hours now and i know for a fact it did not die. the battery was on 100% when i left the house. what can i do?!!?
No if the restore it, it can never be actived because they need to have your apple ID and password to do that. Read http://support.apple.com/kb/PH13695
-
External Context Mapping and "The Mapping to Node...Has Not Been Completed"
Hi there,
I've got 2 components: A, B where A consumes the data provided by B.
I'm calling the component B which includes a view provided by A. This view (provided by A) needs data inputted by the user in a view in B.
The context of B contains a node called MULTIVALUES flagged as Interface + Input Element Ext.
The component A uses the component B, in the component usage interface controller of the component A I've referenced the component controller of A. I have then created a node in A's component controller and done the mapping from the component usage interface controller of A to A's component controller.
The manually created component controller node in A is NOT an interface.
Now when I invoke B I'm getting an error:
The Mapping to Node COMPONENTCONTROLLER.1.MULTIVALUES Has Not Been Completed.
What's still missing?
Thank you!it is indeed much more complex and you need lot of understanding about the component instances and their life time.
What i do normally for such complex cyclic dependency , i try to split the common part which is needed in bot component_a and component_b and create a new super component_s.
Component_s is used in both components. You can even go further that you create view component which has nothing but the viewContainer UI elements to embed the views from component_a and Component_b.
The view component has to create all the used components (comp_s,comp_a,comp_b) and after creating call the interface method in comp_a and comp_b to set the component usage of comp_s (use the if_wd_comp_usage=>entering-referencemode).
In this way the comp_a,comp_b share the same instance of comp_s.
What i am saying is to look for a solution in application architecture and not with in the exiting components coding. -
I can't open internet base lotus mail after updated to Firefox 7.0.1...help please. thank you
I use internet base lotus email to send and receive email. it work perfect with Firefox previous version. the problems start after I updated to Firefox 7.
SOLVED: Here's the solution to "I can't open images in Yahoo mail with Firefox 7, but IE works." Just before I log on to my Yahoo e-mail site I enable cookies, but I never enable third-party cookies. That has always worked fine until October 2011. Just after I installed the new Firefox 7 this problem began. Now I have just discovered that if I enable third-party cookies the problem is solved. Users should not have to enable third-party cookies to read Yahoo e-mail via Firefox!!!
-
i downloaded new data thing and i changed my acount and signed out then it say this apple id has not been used in the i tunes store but when i try use it in itunes store it says the same thing help me i beg u!!!
same here; am trying restore now
other similar threads
https://discussions.apple.com/message/16065356#16065356
https://discussions.apple.com/thread/3300603
seems apple is goofing up here
Maybe you are looking for
-
"Source used" item best practice
Hello, How can I configure an item with source used "Always, replacing any..." and source type="Database Column" and STILL not loose the entered value every time the page comes back (items are by default repopulated with DB column values, which make
-
Offsetting account in Vendor, Customer and GL line item report
Hi All, There is one requirement from our client. They want offsetting account in Vendor, Customer and GL line item report.(FBL1n, FBL3n and FBL5n). As this field is there in selection screen in lay out setting but field coming as blank no off settin
-
I have for the last two weeks tried to upgrade Snow Leopard each had time give up as after I have successfully downloaded I attempt to go through the process of upgrading nothing happens at the stage of 'Install' I have checked the installation log a
-
Requirement of functional location
Hi friends Please clarify about the below issue 1. Client is supplying the equipment to customer as a rental , sale.Once the delevrey is over they usually installing the equipment to thier functional location. For this use actually we defined the fun
-
I use me.com for ichat. also, i am online although my friends told me that im offline. how do you fix this?