I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

It's a complex project and there are a lot of possibilities. Among them is the length; there are a number of reports of projects that are approaching 2 hours failing to burn.
If it's a question of jarring Create Disk into action, one thing that has worked for some users is simply to click on and the Apply button (s) in the Settings pane of the Blu Ray Share window and then hitting Cancel. This can be tested by duplicating your project and selecting a tiny section of your sequence and exporting. Change the Output Device to Hard Drive and see whether Create Disk successfully writes a disk image.
You can also  check that a specific clip isn't rendering properly. Since the process got to 59%, it may just mean that the burn couldn't be initiated by Create Disk – or it may indicate a problem with a clip toward end of your sequence. (If you can check the log, there may be something useful in there.)
Use the duplicated project and this time set a range for the last 30 minutes or so of the project and export it, using the Blu Ray destination. Again, set Output Device to HD and see whether it will complete.
Good luck.
Russ

Similar Messages

  • After I compress HD Video to H.264 how do I burn to an external Blu Ray Burner?

    How do I burn to Blu Ray after I've compressed to H.264?  Can I go through DVD Studio?

    This is what the DVD SP 4 manual says re: H.264 files:
    "You can use the H.264 video format, also known as MPEG-4 part 10 and the Advanced Video Codec (AVC), in your HD projects. The H.264 encoder is twice as efficient as the standard MPEG-2 encoder. When compared to encoding with MPEG-2, this means that with the H.264 encoder:... You must use H.264 for HD DVD presets in Compressor to encode H.264 video assets for native use in DVD Studio Pro HD project."
    However, i cannot get DVD SP 4 to recognize the .264 encoded files using these presets (Format h.264 for Blu-ray; 1080p @ 29.97fps; NTSC; AVCHD stream).  Compressor produces a .264 video format file that DVD SP rejects.  Do I have to use the h.264 for Apple Devices format (m4v) instead (which also is supposed to support Chapter Markers created in FCPX)?

  • Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

    Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

    Internal vs external should not matter.
    I have a burned to external with CS4, but it was a long time ago.
    And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
    Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

  • I used to have Emoji on my iPod when I first bought it. I had to restore my iPod because it went into recovery mode and it deleted everything. How do I get Emoji back? Do I have to buy it off iTunes?

    I used to have Emoji on my iPod when I first bought it. I had to restore my iPod because it went into recovery mode and it deleted everything. How do I get Emoji back? Do I have to buy it off iTunes?

    You can redownload iTunes purchases at no additional cost by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    By converting the WMA files to AAC formatted files. 

  • Premiere Elements 11 no longer recognizes my external blu-ray burner.

    I have used my Samsung SE-506BB-TSBD external burner many times before today, but for some reason Premiere Elements 11 is not recognizing it. Windows 7 sees it just fine. Premiere Elements 8 (which is still loaded on the same computer) also does not recognize it.
    What do I need to do? Samsung's website is no help, but I have a feeling it's an Adobe issue since Windows 7 still recognizes the drive.

    rbcourter
    When is your Blu-ray burner not recognized
    Premiere Elements 11: burn to DVD disc, burn to Blu-ray disc, burn to AVCHD on DVD disc, or all?
    Premiere Elements 8.0/8.0.1: burn to DVD disc, burn to Blu-ray disc, or both?
    and when you wrote:
    I have used my Samsung SE-506BB-TSBD external burner many times before today
    Did "....many times before today" imply that you could use the burner for Premiere Elements 11 and 8.0/8.0.1 before. I am trying to get a whether this is a "it worked before but now" or a "it never worked before" type issue.
    Do you have the USB 2.0 cable connected to a USB 2.0 computer port directly or via a USB multi port hub? I take it that this burner does not have AC support? If you are using only 1 USB 2.0 port, can you set up the burner for 2 USB 2.0 ports?
    Does the computer involved have an internal burner? Or is this the only burner that you have available to you external or internal for the computer?
    Let us start here and then decide what avenues of further troubleshooting are available to us.
    Thanks.
    ATR

  • Save to external blue ray burner

    Is it possible to burn photos edited in iPhoto to a high definition Blue Ray burner?

    Internal vs external should not matter.
    I have a burned to external with CS4, but it was a long time ago.
    And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
    Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

  • Drivers for LG BE06-LU10 EXTERNAL BLU-RAY BURNER

    hi
    i have purchased this item a couple of yrs back but i want to install it on my mac but cant find any drivers for mac ....i have no idea where to look or if there is someway of installing it ...any feedback would be gratefully appreciated
    thanks

    i have googled bloody heaps of stuff and to no avail ...i have the install disc but its a windows disc and cant find any drivers for mac so i can hopefully run it on here...stuffed if i know ...******* me off

  • IPhone 4 in recovery mode after failed update with most recent software (3/25/13), I only have the past 30 days worth of photos and my contacts in iCloud, how do I get the rest of my pictures off of my phone? I have read the apple article already.

    Basically headline says it all, my phone is in recovery mode following a failed update through the phone and I want all my photos back.  I have already read the "iOS: Unable to Update or Restore" and it indicates that when restoring through iTunes, you lose all data on the phone. I have checked my iCloud (I am a Windows7 user so uploading does not happen automatically, as I unfortunately just figured out) and it only will upload my past 30 days of photos and contacts, inline with what I've read about the cloud only storing 30 days of your past data. I really would like to get all of my photos off of my phone, I had photostream activated and most were in that stream. Is there anything I can do? I don't know what operating system is on there currently, but I have always updated my phone succesfully until today when this happened, so I'm assuming whatever is most up to date until today is the OS it has. Thank you!

    When your phone is in recovery mode, it's like it crashed.  The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.   
    You can believe what you wish by "reading all over the internet".  This is Apple's technical support forum.  We do know what we're talking about.
    since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them?  This is how the phone is meant to be used.  Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish.  Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update?  As you've now just painfully learned, updates do not always go as planned.
    I'm sorry for your data loss, but let this be a very important lesson.  BTW, when was the last time you backed up your computer?  I'm sure you have important data on your computer.  Hard drives WILL fail.

  • Firefox 3.6.3 update stalled on my mac OS X, won't resume. How can I get it to finish?

    When I select "Resume Downloading Firefox 3.6.3" from the Firefox "Help" drop down menu, the Software Update box appears mid-screen with these messages:
    Downloading Update
    "Paused downloading Firefox 3.6.3
    ----- an empty progress bar ---- (and then)
    "Connecting to the update server...
    But there is no motion anywhere in that box and nothing I have done gets it to move. When I click on the "Details" option, I am immediately redirected to Mozilla's Firefox 3.6 Release Notes page.
    So. No updates, reduced functionality, and no apparent way out.

    https://www.mozilla.org/en-US/firefox/17.0/system-requirements/
    https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
    https://www.mozilla.org/en-US/firefox/4.0/system-requirements/
    As of Firefox '''4.0''' the minimum was OSX 10.'''5''' until [http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/16.0.2/mac/ 16.0.2]. Then as of Firefox '''17.0''' the minimum has been OSX 10.'''6'''+ since. This is for Intel as PPC support was dropped as of Firefox 4.0
    Since you have Intel and if you upgrade to at least OSX 10.'''6''' you can then use the current Firefox Releases including Firefox 32.

  • TS1702 After downloading iOS7, I have an app that won't open and won't delete.  How can I get rid of it?

    I have tried re-downloading, but don't believe the app is available as I cannot find it.

    Similar issue:
    Recently updated to ios7 and then updated some apps. A few of them have, theoretically, updated. I can only open them from the App Store by clicking open (where it used to say install and now it says open). However, the actual app on the home screens are shaded and say "Waiting..." as if they are still currently downloading. It has been two days. I tried installing a free app (as some have suggested), this did not work. I tried turning phone on and off. I cannot delete these apps form my phone because when you hold down to get the jiggly apps and then the little "x" to click to close/delete the app, these apps don't have the "x."
    Any thoughts/suggestions??

  • HT4718 i have sent all my photo's to the trash bin by a big mistake,and then trashed them also how can i get these back to my albums please

    I have sent all my album photo's to the recycle bin and then proceeded to empty the trash bin totally..........what a stupid thing for me to do my only excuse is this apple is all new to me and those photo's were/are so precious to me.
    Can anyone tell me how i can retreive them all back..i have no idea what i am doing at all
    Senior moment i think

    Did you empty the iPhoto trash? (left side bar) If not you should be able to drag them out. If you did empty the iPhoto trash, did you empty the computer trash? If you did then they are most likely gone. You can try something like Data Rescue 3, it may be able to recover some. The software is not cheap.
    You can also try a data recovery service, they may or may not be able to recover some for you, but it will be  very expensive.
    You can also click GO>Go to folder in the menu bar (SHIFT COMMAND G) short cut, and type (or copy/paste) in this and see if there is anything in the trash folder.    ~/.Trash     then click go, press return
    Good luck

  • I just recently got a new iphone and I hadn't connected it to my computer yet to sync it but i had downloaded ringtones before i synced it. I finally synced it and lost my ringtones. How do I get my ringtones back?

    I just recently got the iPhone 4s and before I connected it to my computer to sync it I had downloaded some ringtones. Later that day I had synced my iphone and my ringtones have been deleted. And I dont want to have to but them again. Does anybody know how to get the ingontes back?

    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • TS4006 My old location is stuck with the gray dot and won't rsfresh. How can I get this iphone to locate my cell again

    I am trying to locate my girlfriends cell
    I use Iphone finder
    It was working minutes later is stayed on old location with a gray dot
    Any input why?

    Hi,
    There is a similar issue in this thread
    https://discussions.apple.com/thread/5108357?start=0&tstart=0
    Follow the steps in the Apple KB metioned and hopefully you will have your device back

  • My iphone 4s has a black screen. If I hold down the on button, it will occasionally flicker and then go black. How do I get it to turn on?

    My Iphone 4s has a black screen. If I hold down the ON button, it will occasionally flicker and then go black again.
    Is it dead? Is there any way to fix it? It's sitting in a bag of rice right now, a desperate measure.

    Are you saying it got water damage?  If not what mende1 suggested, or the following
    http://support.apple.com/kb/TS3281
    is the way to proceed.  If it got wet all bets are off. 

Maybe you are looking for