I have changed my preferences and stopped my email notifications to not to receive them. Why did I get 50 notifications
I have changed my notifications as to not to receive them. Why am I still receiving themm I just got 50. Of them
Read Frank Caggiano's explanation in this discussion.
https://discussions.apple.com/thread/3343849
Similar Messages
-
Why, because some clumsy, careless humans couldn't stop scratching a less that 1/4 inch wide lens? That is no reason for replacing the lens and pandering to their inability to handle advanced technology is not going to push the technology forward. Tossing out cheap cases like you did for the imagined iPhone 4 antenna "problem" will not fix this VERY real problem. I have been a loyal customer since 2005 and this, as stated in the title, could be your most costly mistake. Either your software engineers are going to have to compensate for the purple tint appearing in photos or you're going to sacrifice massive profits to physically replace the lens in every iPhone 5 you have sold and continue to sell. I've read that Apple customer service has tried to sweep this away by falsely claiming that the purple tint is "normal". It is absolutely not normal by any stretch of the imagination. Do not be silent Apple customers! Let the complaints pour like Niagara Falls or settle for the garbage that has been sold.
My former iPhone 4 took better pics.
I hope Apple didn't do the same with the pending iPad mini or this could turn into a maelstrom that even Steve Jobs would not have tolerated.
Signed,
Extremely dissapointedRead: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees. -
keyboard not recognised by Mac.
Try:
Troubleshooting wireless mouse and keyboard issues
and maybe:
OS X: Bluetooth devices become unresponsive -
When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks
Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.
-
I have been using my IMac without a problem when I left it and went back to enter the password the IMac did not see the keyboard. I have changed the batteries and the green light comes up on the keyboard and then starts to flash indicating it is looking for the IMac but nothing happens. I have tried another set of new batteries with the same result. Is there any known problems in this area. The IMac is 5 months old.
Thank you for any helpWhat operating system does your iMac have? (please always post your operating system to prevent confustion).
If it's pre-Lion you will have to set Mail up manually:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger -
ave to quit. I have checked system preferences and the option is still checked. Is anyone having the same problem?
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.driver.AppleBluetoothMultitouch.trackpad.plist.
Move the .plist to your desktop.
Log out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update. -
Stop sending me emails Ido not need 100 emails a day clogging up me email. I hav change me message to stop receivinge mails and I am still getting them. STOP STOP
You are NOT talking to Apple here and remember that every time that you post again and someone responds to try to help you, the emails will continue to pour in from those people that are trying to help.
Read these instructions from another discussion and make sure that you are doing everything exactly as stated below.
Anyway first click on your name to get to your homepage/profile. At the top there are three tabs one of which is Notifications, that's number one,. Next look at the right side of the page at the box Actions in there click Manage Email Notifications. Finally click Edit Preferences in the action box and click on Email Notification Preferences.
And make sure that you click on Stop Email notifications in the Actions Box in the upper right corner of this page.
Here is the discussion that I copied the instructions from.
https://discussions.apple.com/thread/3343849 -
I have changed my password and still can't get home sharing to work. Get the message "Home sharing could not be activated because the account or password was incorrect." It's what I have used to sign in here! Any help much appreciated.
So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID. -
Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions
10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong? I have done this on both of my iPads and it hasn't let me go back on to iMessage on either of them.
iCloud System Status
Current
iCloud: iMessage - Users Affected: Some
11/18/2012 13:34 PSTUsers are unable to use iMessage. Normal service will be restored ASAP.
iCloud: FaceTime - Users Affected: Some
11/18/2012 13:33 PSTUsers may be unable to place FaceTime calls. Normal service will be restored ASAP.
http://www.apple.com/support/icloud/systemstatus/ -
i have changed my PC and want to authorise it on itunes match, it looks like it has but still says i have 5 machines authorise
Sign-in to your iTunes Account, you can see which computers are authorised. If necessary de-authorise all and authorise those again that you need.
-
I have changed my ID and I can no longer update my apps or see my purchases. I have changed my ID in the store settings.
I have been told by Apple security that the ID does not exist it is now associated with my new ID, they told me to call support there is a pending case but they can not seem to provide an answer. If I log in in with my original ID. It does not recogonise my passwords or any answers I give to the security questions Grrrrrr I wished I never changed my ID!!!
-
have change my name and my icloud is still using the old account. how do i change it to my new apple ID on my iphone without deleting the backup already in icloud
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Hello, I have changed my location and credit card for my apple id. All purchased apps I had before are lost. How can I get back my purchased apps? Thanks.
If you are referring to an iDevice, sign out of your new Apple ID and sign back in with your old one - they should all be there.
Maybe you are looking for
-
Is importing a class the same as getDefinition("className") as Class ?
I was wondering is this the same: import HomePage; and then HomePage.currentPage = "videosPage"; == ? public static var HomePage:Class; and then HomePage = ApplicationDomain.currentDomain.getDefinition("HomePage") as Class; HomePage.currentPage = "vi
-
I've been having an issue with smart albums. It seems that in iPhoto 11, they won't update automatically. I can force them to update by getting info on the album's settings and then choosing "ok" without changing anything. This, however, is a royal p
-
Project Plan for "SAP BW Implimentation" project.
Hi All, My name is Rajasekhar. I am a BW consultant. I would like to know the standard template for PP ( Project Plan ) for SAP BW Implimentation Project. 1) Could you please suggest me any link available in SAP to get the Project Plan and related do
-
Cannot Access Shared Services After Installing 11.1.2
Installed and successfully configured Hyperion Foundation. Validation tool is telling me configuration of foundation, workspace etc was successful. However when I try to access Shared Services at http://server:28080/interop I get a 404 error, and whe
-
Edit in Photoshop no longer available
I recently replaces PS4 with PS5.1. Now when in Lightroom 3, if I right click a photo, the option to edit in Photoshop is greyed out. Any ideas?