I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

Hello SalsburgD
The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

Similar Messages

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

Have a Canon 70D. Lightroom will not recognize the raw CR2 file. Don't know if I need an additional plug in or how to get one. Can anyone help?

I have a Canon 70 D. Lightroom will not recognize the raw CR2 file. Don;t know if I need an additional plug in to the tether plug in for canon, or how to get one. Can anyone help?

See Camera Raw plug-in | Supported cameras
You need Lightroom 5.2 or later. Which version of Lightroom are you running?

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000?

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000? Or, is there a special procedure I should be following?

can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

Hi Avonbikerider,
If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
https://discussions.apple.com/thread/4167956
Regards,
- Brenden

I have a new computer and itunes content didn't transfer - it doesn't recognize me, all my apps are gone, what do I do, I have a new computer and itunes content didn't transfer - it doesn't recognize me, all my apps are gone, what do I do

I received a new laptop. the person that transferred all of my files, didn't know what they were doing when transferring itunes content. Now I have my new computer and itunes doesn't contain all of my music. I don't know how to set it up to recognize my account and I don't see any of my apps. What do I do now?

Copy the ENTIRE iTunes folder from the old computer to the new computer.

When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

Hi,
Already mentioned on the following post:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/VGA-on-laptop-HDMI-on-TV-needs-connected/m-...
You need a CONVERTER, not ADAPTER The setup:
The following list may help:
http://www.ebay.com.au/sch/sis.html?_kw=HDMI+To+VGA+COMPONENT+Adaptor+A+V+Digital+Converter
Laptop (VGA) ---- Converter from VGA to HDMI ------ TV
You also need sound, you can buy a converter with sound OR connect sound directly from laptop to TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT204053 I have an iCloud account on my Mac which has a different account name to that on my iPhone. How can I change the Mac account name to that on the iPhone?

Hi,
I have an iCloud account on my Mac which has a different account name to the iCloud account on my iPhone. How can I change the Mac account name to match the iPhone one? Kuranda.

You can't change it in one step. Sign out of the one now on the Mac, sign onto the right one.

HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
Jaylsworth

How did you fix this??

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

I have been using my ipad by wifi but I am unable to connect when i plug in my cable to my PC - what settings do i need to change if any ?

I use my ipad by wi fi at home but at a friends house I have to connect to a pc by cable - I am unable to get internet what settings do i need to change?

You can't get Internet using the cable.

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works - what settings do I need to use to make aiffs work?

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine, can I change the Vieodcard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible?

I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine. Can I change the present Videocard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible? I have upgraded the memory to 4 GB 667 MHz DDR2 SDRAM.

The GPU in a iMac is NOT upgradeable.
You should check to see if your model of iMac meets the minimum specs to run FCPX.
I believe that your GPU is NOT OpenCL capable, and hence not supported.
Even if it works, you would probably get marginal performance.
What you can do is download the trial version and see how (and if) it works.

My iPad 2 picks up very weak wifi signal, but my iPod touch 5 in the same spot picks up super strong signal. What can I do to change this?

I have an iPad 2 and am iPod touch 5. Yesterday, my iPad all of the sudden did not want to pick up ANY signal at all in my house. It's like it completely give up on wifi, while my iPod and my laptop works just fine in the same spot. (I have an upstairs bedroom, while the router is downstairs in the kitchen).
So I have been trying yesterday to get it to work so what I have done is completely wipe the memory clean after I backed it up on iTunes. After resetting it, I restored it. Still nothing. So I tried to take my iPad down nearer to the wifi router, and OMG it picked up the wifi signal! WHUT?!? It didn't yesterday though...
But now whenever I am up in my bedroom, my iPad would not pick up the wifi at all, or if it did, the wifi would be super duper weak! But two days ago, it was PERFECTLY okay! My iPod and laptop that is sitting right next to the iPad up in my bedroom pick up the signal completely fine.
Can someone help me? What should I do? Is it problems with my iPad or would it be my router that is the problem?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

Similar Messages

Maybe you are looking for