I have conducted a pinout test and all seems ok... but..

Hi, I have conducted a pinout test on the power supply of my G4 Dual 500mz (100mz bus) (I think its a Giga ethernet) and it passed all stages, I have checked the battery and reset the pram, I have a steady red LED on the motherboard. When I press the start up button it only illuminates for one or two seconds, then nothing... the LED on the motherboard stays on and all the fans spin... but the front button stays dark and machine will not boot.
I have pulled and swapped the RAM (2x512 1x256 1x128) to no avail.
I have only just got the machine and when it refused to boot I removed the battery for an hour and started the machine up without it and it came on and booted but about 5 minutes into usage it froze, I pushed the reset button and now cannot get any response at all.
I used a battery from my other mac which I know works.. still no joy.
Can anybody let me know what I might do next?
I cant boot from a disc as the machine doesnt get past lighring up.. no chime.. nothing.
Help.... please

Thank you for your reply Forrest, If I might ask for some points of clarification please
(a) How do I make the malfunctioning machine a target disc? especially as it wont even get to the chime stage in boot up?
(b) Does it matter that the dud doesnt boot?
(c) How do I conduct this procedure?
(d) I have a dual 450mz processor that I pulled from my working G-E, should I try and fit these, are they suitable?
Thanks for your help.

Similar Messages

  • HT1583 it burned in idvd and all seemed ok but when it finished saying the project was finished when I played it on the tv it had not burnt the whold project why would this be thanks

    I was burning a slideshow from iphoto and went to idvd and it burned ok and finished and said it was ok, but when I played it in the tv it did not play the whole project
    why would this be. cheers vic

    Hi
    Strange - But needs lot's of more info to make it possibly to suggest any reason. Me no mind reader at all.
    • What Video Codec was used
    • What Video editor
    • How did You get material into iDVD
    • What did You select in iDVD
    frame rate
    video format
    encoding quality
    burn speed (set down ?)
    • Brand of DVD used
    • Type of DVD used
    And all vital info You can think relevant.
    Yours Bengt W

  • HT2693 What is wrong with the new iOS 6 software on the iPhone 4 and 4s it's made all apps, messaging, calling etc very glitchy and slow!? Myself and a few of my mates have the 4 or 4s and all seem to have the same problem. If its apples software, are the

    WWhy's the new iOS 6 so slow and glitchy?

    Im having problems since the new update also!! ALL my apps crash! This is getting old! No help from apple! Very frustrated!!! I dont know what to do!!!help please!!

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

    I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I have one paid mobileme account, few days ago I have done transition to iCloud and all my iDisk, contact... gone. Today I tried login to iCloud application on my windows pc but can not, it said "this apple id is valid but is not iCloud account"

    I have one paid mobileme account, few days ago I have done transition to iCloud and all my iDisk, contact... gone. Today I tried login to iCloud application on my windows pc (64bit) but I can not, it said "this apple id is valid but is not iCloud account". I can login on website icloud.com but can not login into iCloud application installed on pc. What's wrong?
    I have tried another free apple ID and logged on. That's funny when I can login with free account and can not login with paid mobileme account!!!!!!

    By the way - the only reason I downloaded iCloud is because Apple deleted the backup option from iTunes.  Since iCloud doesn't work, I guess we have no way to protect our iTunes music collection.  Absolutely stupid.

  • I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

    I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded.  Help - thank you

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

    Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

    You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)

  • Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.

    Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.
    On opening the app "Find my iPhone" I add my password and sign in, to be greeted with a screen that says;
    "Update Find My iPhone. A new version of Find My iPhone is available from the App. Store. You must install the update to continue using the app. Update now"
    On hitting the "Update now" button I'm taken to the relevant page on the App Store, to be told that I cannot update as it needs IOS8 to be able to continue and as my iPhone is only a 4 cannot install IOS8.
    I'm left going around in circles. The only thing would be to delete the app, but looks like I could not re-install the version I would need. Any body have any thoughts or suggestions? (Apart from updating my phone, I have a few months left on the contract!)
    Thanks in advance.

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • HT201365 Just dowloaded the new ios 7, and i can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a Blue circle spin and spin for over 5 or 10 min. without nothing happening! Help !!!

    Just downloaded the new ios 7, and I can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a blue circle spin and spin for over 5 min. without nothing happening! Help!!!

    Hi,
    This is how App Store app shows now when an app is downloading. If you cannot download anything, go to Settings > iTunes & App Store, remove your Apple ID, and set it again. That should work.
    Hope that helps.

  • I just upgraded to FF 7 and now when I open Firefox none of my history or cookies have been saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with this on FF7?

    I just upgraded to FF7 & now when I open it none of my history or cookies are saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with FF7?

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    See also "Help About".
    *Tap the Alt key or press F10 to show the Menu bar.
    In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
    *There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
    *If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
    *You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
    It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
    See also:
    *https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
    *https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
    *https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

  • I have windows vista home premium and all other versions of iTunes worked on my laptop iTunes 10 won't work, I get a message saying I'm not connected to the Internet when I am. Why isn't iTunes recognizing my browser configuration?

    I have windows vista home premium and all other iTunes worked on my laptop, I downloaded iTunes 10 and now the iTunes will not connect to the Internet. I use Mozilla firefox on my laptop and for some reason it keeps saying the connection timed out and I'm not connected to the Internet when I am. Why isn't iTunes recognizing my web configuration?

    It probably has to do with your security and/or browser configuration.
    When my laptop crashed last year and I had to get a new one, I dealt with the same thing. First, go to your control panel and select the security section. See if your firewalls are up or not. If they are, turn them off. If you have any software to speed up your browser, that can affect the connection as well. Go into that software and disble/turn it off. If this doesn't work, contact customer support. They have a few other tricks they had me try that worked, but I can't remember them now.

  • Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you hel

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

  • I have upgrade to IOS 8 and all Fotos are ereased and on my Computer is only the last Backup and there a no Photos now what can i do?

    I have upgrade to IOS 8 and all Fotos are ereased on my Iphone and on my Computer is only the last Backup and there a no Photos now what can i do?

    You really need to try this on a computer, not on the iPad.
    Seeing how what is in the cloud is also on the iPad, if the content is not on the iPad, there is a good chance that the content is lost. But you can try logging into www.icloud.com in a web browser on a computer and log into your account and see if you can get into the Pages app. You may have to sign up for iCloud drive if you didn't do so already. Make SURE you that you read the blurb that will pop up in that window in iCloud for more information.

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

Maybe you are looking for

  • IdeaPad U430p - Win 8.1 watermark SecureBoot

    Hi, I bought before +- 14 days notebook IdeaPad U430p Grey with configurations i5-4200u 8gb ddr3 geforce 730m in notebook is preinstalled original windows 8 64bit because i have msdn account i have original iso windows 8.1 64bit so i after fresh inst

  • HTML page with FLASH object doesn't reload upon a redirect

    Am using:  ECC 6.0 and ABAP SAPGUI development Hi All, I'm seeing a frustrating issue that i'm hoping others have seen and resolved. Here is what i'm attempting and below that is the issue: 1)  I have created a ABAP program in which i'm using the HTM

  • FTP Remote Archive Filename

    Hi, I have built an SOA composite application to FTP files from destination A to B. I now need to archive the files in an 'Archive' directory on the remote server I am retrieving the files from (destination A). I have got this to workin using the JCA

  • FABridge in AIR: Could not resolve fab:FABridge to a component implementation

    Hi all, I'm trying to use the FABridge in my HTML-based AIR app to communicate between a swf file and my JavaScript code. Browsing through the forums, it appears that ExternalInterface is not advisable in AIR, so I turned to FABridge instead. Can any

  • How to pad spaces at the end of a string

    Hi All, I am new to ABAP and need help to achieve this functionality    I have to build a string with fixed lenth . my input string   is always lesser than equal to X . I need to calculate and    add that many spaces at the end of the input string .