I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.
I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.
Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you
If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.
-
I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?
Quit iTunes, restart your computer, reset the iPad and try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.
If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades. -
I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David
drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR -
My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html -
Hi
I have tried to restore my i phone 3gs using a USB cable connecting to itunes.The process has gone smoothley but i am now getting this message on my i phone;"your i phone could not be activated because the activation server is temporarily unavailable.Try connecting your i phone to itunes to activate it,or try again in a few minutes.I have been trying and trying again and switched off my firewall too.but still getting this message.Can anyone please advise me?That is almost always because the phone was hacked to unlock it from the original carrier.
-
Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
-
ADFS 3.0 - Web Application Proxy configuration Issue
Hi All,
We are in the process of implementing ADFS 3.0 published to the internet for o365 Federation purposes.
The setup consists of the following
- 2 x windows 2012 R2 running ADFS 3.0 ( only one server presently installed and configured though)
- 2 x Windows 2012 R2 Running Web Application Proxy ( only one server presently installed and configured though ).
There is an F5 Big-IP load-balancer for both internal and external interfaces and it has been configured after a lot of issues with the SNI part on the F5.
So, in short the setup is now a single server hosting ADFS 3.0 using SQL and a single WAP server, however the traffic to these servers are still going through the LB.
Now the issue is that i cannot complete the installation/configuration of the Web Application Proxy server. There is a firewall in between our DMZ and the internal network. I can reach the internal services via the following url and telnet on port 443
to the federation service as well. (ports for 443 and 80) are opened to internal network on the load balancer ip . I can reach https://fs.domain.com/adfs/ls/idpinitiatedsignon.aspx and federationmetadata/2007-06/federationmetadata.xml location as well
from the Web APplication proxy server without any issues or certificate prompts at all.
When i do the configuration for WAP, i use the same account which was used as a service account for the ADFS service internally. If i use a local admin account, it errors out with another message stating the connection was closed.
The certificate on the internal server along with its private key was exported and has been imported on the WAP server . This is not internal CA, instead we are using DIGICERT SSL with SAN Names for enterprise registration and work folders. Hence the CA Chain
issue is ruled out and also this is not a wild card certificate.
When the wizard starts configuring, it does establish the trust with the federation service which is shown up in the event viewer with EventID 391 within 15 seconds i get another event id 422 which states that it cannot retrieve the proxy configuration
and eventid 276 on the Federation server which states the authentication failure. this continues until the servers stops to try configuring the wizard.
I have read all the available threads on the 3.0 WAP installation /configuraiton problem and tried all the steps possible but i am still stuck with this issue.
There is one more part that i noticed on the ADFS server, that the self signed services for the token-encrypting and token decrypting are self-signed certificates. Also, in the certificates it was showing up as not trusted. and i installed them to the TRUSTED
ROOT CERTIFICATION STORE after wich i cannot see any private key showing up when viewing the certificate which means i cannot get the MANAGE PRIVATE keys option when right clicking on the cert to assign read permissions for the ADFS service account.
Should i assign the same SSL sertificate (SAN based for enterpriseregistration & Workfolders) to the token-encrypting and token-decrypting services in ADFS console or should i leave them as self signed ? I did read that self-signed is not recommended for
production environment ? If not the same certificate what are the requirements for the certificate ?
I am not sure what I am missing in the configuration that is causing this issue. The WAP servers are not part of the domain and have also ensured the time synchronization between the domain machine as well.
The service name is fs.domain.com on both the internal and external DNS ( we have domain.com as a zone in DNS internally as well ). I am able to Authenticate inside and from the WAP server when accessing the link.
Could it be a Load Balancer Configuration ? [i will try eliminating this from the configuration]
Let me know if there are any options that i can try to resolve this and get the configuration working.
Cheers,Does the load balancer pass the certificate session through to the ADFS server or are you offloading SSL. SSL offload does not work with WAP/ADFS integration (at least at the time of writing it does not).
Can you try through the load balancer with SSL pass through turned off please.
Also as ADFS 3.0 (Server 2012 R2) uses Server Name Indication (SNI) then any health checks that run on the load balancer must support this, so if they do not then you need to use TCP 443 checks for a listening port, as doing a standard HTTPS check will fail,
and if the load balancer fails its checks whilst you are configuring ADFS that might be a reason why it has gone offline for you (error 442 is to do with failure to swap client certificates between WAP and ADFS).
Finally, check the June update to Server 2012 R2 (http://support.microsoft.com/kb/2964735) as that has fixed some certificate issues with multiple servers for WAP and ADFS when you don't have the
2012 R2 AD schema in place.
Brian Reid
Exchange MVP and Exchange and Office 365 Certified Master
www.c7solutions.com
Brian Reid C7 Solutions Ltd (www.c7solutions.com) -
Can i have multiple ActionServlet in a web Application?
Hi
Can i have multiple ActionServlet in a web Application?
if YES then please give me the sample configuration file..
thanks & Regards
raghavanHi,
This forum is related discussions about creator. Please post this to an appropriate forum
You may post here
http://forum.java.sun.com/forum.jspa?forumID=33
MJ -
Accessing Intranet Web application (protected by Agent) through Gateway
Hi All,
I have installed Sun Portal Server in one machine and SRAGateway on different machine and also I have an intranet Web Application server(not accessable through internet), is protected by Access Manager Policy Agent.
I am just displaying this web application Url in a portal desktop . So when user access the Gateway (https://host.com) , after successful authentication he can able to see the portal desktop with web application url. After clicking this url he can enter in to the Web Application.
I am able to enter into the portal desktop , but when I click the web application url its giving the following error" (https://gatwayhost.domain.com/http://websver.domain.com)
"Unable to connect to the host, Contact Administrator
Please help me to solve this.
Thanks in AdvanceWe use a reverse proxy because we had specific requirements. It's more complex than just using the rewriter proxy and maybe not the best solution for you.
The setup is quite simple, you install an apache server (with mod_proxy module) , you install the access manager agent on top of apache and you set the httpd.conf to tell the apache to act as a reverse proxy.
You tell the gateway to use the reverse proxy instead of the real site. In our case we simply add a line poiting to the reverse proxy for the server name in the /etc/hosts file.
You open the http port 80 in your firewall from the gateway to the apache reverse proxy and from the apache to the intranet website.
And it's done. -
Illegal access: this web application instance has been stopped already
Illegal access: this web application instance has been stopped already. Could gineConfigurationFactory. The eventual following stack trace is caused by an er o attempt to terminate the thread which caused the illegal access, and has no fu
step..........5
java.lang.NullPointerException
[Loaded org.apache.jsp.response_jsp from
i found this error can any one help me about this
Message was edited by:
vijay_kumar_choyalExcuse me, but the information you provided does not make sense.
Take a look here: http://jspwiki.org/wiki/StupidQuestions
(I'm serious, there's an explanation for your problem)
Greez
Jens -
I setup the Web Application Proxy role on Server 2012 R2 a while back and published a few applications. Everything worked great. A few months later I deployed DirectAccess on the same server. Once again, everything worked great.
All of a sudden users started stating that they were receiving an "Internet Information Services" page while they were clicking links on the intranet. Clicking the refresh button in their browser would resolve the problem. It was puzzling. Eventually
I figured it out. It was only mobile users having the issue. They were taking their laptops home, clicking HTTP links on our SharePoint site (which were not deployed via Web Application Proxy), which was then hitting the Web Application Proxy server's
port 80 over HTTP (not HTTPS). Then the page was being cached by IE on their laptop/tablet. When they returned to the office the cached page was opening which is why hitting refresh resolved the issue.
I understand that one of the issues is the wrong link on the intranet (HTTP vs HTTPS). We'll have these corrected. But the real problem is that they were hitting IIS on our Web Application Proxy server. Why is IIS installed? It's not required by WAP
and I never installed it... Was it installed as part of DirectAccess? And most importantly, will I break anything by forwarding HTTP to HTTPS within IIS using URL rewrite? Will it affect DirectAccess? Our NLS is not on the DA server.
Once again, this server is only used for WAP and DA. Nothing else. Any input is greatly appreciated. Thanks!Hi Cormang,
Yes, IIS is a part of DirectAccess.
Windows Server 2012 combines the DirectAccess feature and the RRAS role service into a new unified server role. This new Remote Access server role allows for centralized administration, configuration, and monitoring of both DirectAccess and VPN-based remote
access services.
When we try to remove the IIS, we will get the message below,
I have tried to disable the IIS server on my DirectAccess server. DirectAccess client still works properly. Therefore, it seems that the IIS is not necessary to DirectAccess.
Best Regards.
Steven Lee
TechNet Community Support -
Azure Web Application Proxy not rendering all assets for RD gateway
Hi All,
I have an on prem RD gateway, internal as http://desktop and internal with https://desktop.mydomain.local and https://desktop.mydomain.com via a forward lookup zone. internally it is working ok.
I installed the azure web application proxy and configured each one of those URL's in an attempt to get this working ok.
The problem is that it renders the header and nothing else in FireFox and Chrome, IE tells me its in protected mode. But when i check the web requests I am getting A status of "aborted" on the assets, be they jpg, css etc. This is very strange.
I have the firewall open as per the sparse documentation on technet. Any demos I have seen were on a simple single asp.net mvc dummy site.
I am using passthrough at the moment and the rd gateway is in forms based auth mode. I got this working last month with regular on prem WAP on another build. Has anyone actually attempted to use this to publish anything significant ?
Rob
RobHi Rob,
It is possible that we do not support Remote Desktop Gateway being published via the Azure Active Directory Web Application Proxy and that is why your running into issues. I shall have to check this out as I have not attempted to do this yet.
I shall investigate and come back to you in regards to this, I shall also reach out to the team whom own this feature and they may choose to reply directly via this thread.
Regards,
James. -
Will adding a second ADFS Web Application Proxy cause service disruption
Today I have attempted to add a second ADFS WAP server to an existing (working) ADFS solution based on 2012 R2.
I am able to install and configure the required role/services successfully but then I'm presented with the Remote Access Management console. This shows the two WAP servers but not the existing published application from the original WAP server and only seems
to let me Publish a new application.
I'm not sure if I should go ahead and run the Publish Application wizard again in case it impacts on the existing application and causes disruption to the service/users.
Any suggestions would be much appreciated.
Cheers for now
Russellthe config for the Web Application Proxy is stored in the ADFS v3 configuration database.
As soon as you add a new WAP to the farm it will get its config from the database
WAP can be domain joined or not. The reason for having it be domain joined is if you need to manage the system centrally and you need to leverage Kerberos Constrained Delegation for Windows based apps
If you have more than one WAP, you should use some kind of load balancing mechanism such as either Windows NLB or a hardware loadbalancer
adding a new WAP should not impact, you just need to make sure it is actually used
Cheers,
Jorge de Almeida Pinto
Principal Consultant | MVP Directory Services | IAM Technologies
COMMUNITY...:
DISCLAIMER: This post is provided "AS IS" with no warranties of any kind, either expressed or implied, and confers no rights! Always evaluate/test yourself before using/implementing this!
Maybe you are looking for
-
Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
-
Major drive crash, can't find photos
The cable that connects my external drive to my MacBook Pro came loose while I was working in iPhoto (library was on external drive). When I reconnected and tried to use iPhoto again, some of my thumbnails were missing, so had iPhoto rebuild the thum
-
my balance is 0.02$ and i can't buy anything with. i want to change my payment method but i can't because i have to spend this balance first.
-
Switching between LinkedList and Array
Hi, I'm new to OOP and Java so please bear with me. I've been given an assignment to code my own collection similar to the Java Collection. It has to have sorted arrays, unsorted arrays, sorted linked lists and unsorted linked lists. Basically, the u
-
Preserving persistance implementing class id
Hi, I was suggested by Adobe to preserve the persistance implementaton class id while splitting the CS4 project into model and ui plugin for CS5 or to give conversion provider if the persitant data format ge changed. But I have doubt what to do if a