I have connected my new Onkyo TXNR626 to new Apple TV.  No Sound

I have connected my new Onkyo TXNR626 to new Apple TV.  I am not using video.  AppTV connected to receiver via optical digital audio cable.  Onkyo remote controls AppleTV on my iMac.  Wireless set up and connected.  No audio coming from receiver.  Speakers do work.  I know it sounds weird to have this system with no video but that will come later when we can do some reconfiguring.  Just want to hear my iTunes on the stereo

Even tho you only want sound, you are still going to have to connect the receiver to the atv via HDMI or whatever connection works for your particular atv.  Optical only wont allow the receiver to communicate

Similar Messages

  • I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

    I  have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • I have connected a new time capsule to a dsl modem.  It doesnt see the internet. Airport utility says: Disconnected. But it isnt. Internet tab shows PPPoE. Must I enter Account Name or Password? If so, where do I find them? If not, what do I do?

    I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem.  If I click the internet Icon in Airport Utility  it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows  Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
    Or am I completely on the wrong track.

    Thanks. The modem is a Speedtouch ST585  v6. How do I know whether it is in adsl bridge?  Also this is a modem-***-router. Does that make a difference?
    If you did not put it in bridge then it is not in bridge..
    Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
    BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
    Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
    And I am using Airport Utility 6.0. How do I get the earlier version?
    By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
    Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
    Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed.

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

    Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable. 

    Hi CJR
    I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
    Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
    TC will back up until full and then begin deleting the oldest back-ups.  Mine is a 2TB Time capsule.
    My back-up plan is as follows:
    1.  Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
    2.  Contacts, reminders, appointments, notes, email are backed up through iCloud.
    3.  iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
    4.  Photos are on my MacBook Air and are backed up on my HP external drive.
    5.  Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS  cloud and my old PC and does not alter their native format like storing in iCloud would do.
    Cheers

  • I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

    I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!  Further info:  I am a complete newbie to Mac.  Had three macs prior to 2000 then four PCs.  Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back)  with the F4 function key.  While I can get the background image from my MBA to display, that's it.  Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on.  So Idragged it over to display in the centre.  But that's all that's there.  And now I have gone out of those web pages but they are still displaying on the monitor.  There is some wierd disconnect.  I'm sure it is just a setting thing.  Will keep searching for answer but any advice welcome!

    Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
    Let me know if this worked for you.

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • TS1363 I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone h

    I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone help me?

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • I just bought a new macbook, and am trying to transfer my settings, etc, from my old imac.  I have connected the two with a firewire.  How do I now transfer the data?

    I just bought a new macbook, and am trying to transfer data from my old imac.  I have connected the two with a firewire, and how do I now transfer the data?
    Thanks in advance.
    Joel

    You can connect them in Target Mode http://support.apple.com/kb/HT1661 and then drag and drop from the iMac to the MacBook.

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • I have connected an external hard drive to my new macbook pro.  I only have read access.  How do I copy folders to the external hard drive?

    I have a new Macbook pro retina.  I have connected a WD external hard drive, but have only read access.  I want to back up my computer, and have the ability to archaive files.  Any suggestions?

    I have connected a WD external hard drive, but have only read access.
    As ds store already pointed out, if the drive is formatted as NTFS, you can't write to it. Fortunately, the fix is easy, just erase the hard drive using Disk Utility as Mac OS Extended (Journaled).
    I want to back up my computer, and have the ability to archaive files.  Any suggestions?
    Backups and archival backups are not necessarily the same thing. An archival backup is to be kept indefinitely far into the future, and should never be changed after it is created. That does not mesh well with being on the same drive as a backup maintained day-to-day. Ideally, archival backups should be written to one drive - possibly multiple backups, but each one should never be touched after it is written - and other backups should be maintained with greater frequency on one or more other drives.
    You can get a bit of compromise with an incremental backup, like what Time Machine does. That will keep old data as long as there's still free space on the drive, then will start removing the oldest copies of files to make space for newer stuff when necessary. Another alternative is the way Carbon Copy Cloner does incremental backups, where the data keeps piling up until the drive is full and then the backups fail until you remedy the situation. (This could allow you to fill up a drive and then put it on a shelf as an archival backup and start a new backup on a new drive.)
    If you can specify more what you want to do, we can advise you better.

  • TS1967 Hi !  I have connect my new i pad with usb cable to my pc but i don't have internet to it. What can i do?

    Hi !
    I have connect my new i pad with usb cable to my pc but i don't have internet to it.
    What can i do?
    Thanks
    M.Tintikaki

    Connecting the iPad to a computer via a cable does not provide Internet access to either.
    What are you attempting to do?

  • I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
    Try manually mounting the disk.
    In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
    Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

  • Just got my new iphone4 but nothing is happening. all that appears on the screen is an itunes icon. what should i do now. i have connected it to my laptop and have opened an itunes account. help

    just got my new iphone4 but nothing is happening. all that appears on the screen is an itunes icon. what should i do now. i have connected it to my laptop and have opened an itunes account. help

    That voucher only works in the country in which it was purchased. Are you trying to use it in another country?

Maybe you are looking for