I have created some movies using After Effects but can't open them now because I get the following message:
I have created some movies using After Effects but can't open them now because I get the following message:
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the GPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http//www.adobe.com/go/aeraytracedgpu
HELP. I have a project that needs to be delivered.
The alert message is just telling you that a specific feature won't use the GPU. This message is innocuous. It only means that the processing of one specific, obsolete feature will use the CPU, not the GPU.
Are you saying that After Effects won't start or open your project?
Similar Messages
-
I need help, i have the CC 2014 and i can npt get to associate the "extract filter"
How did you get the Extract filter into Photoshop CC? You will need to undo that - especially if you copied a whole batch of plug-ins supplied by Adobe with an earlier version.
-Noel -
The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
KarenThanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen -
when I have made a movie in Imovie and I want to transfer it to Theater I get the following comments: "Imovie is updating your Theater, You can't add or remove movies right now. Please try again in a moment". I have uninstalled and reinstalled Imovie to no avail, cleaned with "Onyx" etc.
This simply means it is set to Automatically update and you should not have to do anything with it.
When you put new music in iTunes , it will automatically go on the iPod next time you connect it.
This is the default to make it very simple and very easy to use.
If you want to do it all yourself, iTunes prefs -> iPod.
Set to Manually manage songs and playlists.
You have to drag songs to the iPod and delete them from the iPod. -
When I try to open a recent document I get the following message "You need a newer version of Pages to open this document." I have downloaded version Pages version 5.2.2 and the app store confirms this (and won't let me download it again), but my Pages About reports that I am using 4.3
Here is the solution that I received from the chat line.
When you update applications like Pages it usually keeps both versions on the computer. So what most likely happened is it didn’t put the new version on your dock. So to fix this, open a finder window. And go into applications which should be listed on the left. Scroll down and you will see Pages listed in here. And the icon should look different. You can drag that icon down onto your dock.Open that and you then can access your documents -
I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
-
I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering. -
Hi I have created a movie using iMovie 10.0.6 on a macbook pro using Yosemite 10. I want to burn this movie to a dvd to use on any dvd player.
I have "shared" to a file and saved it to a named folder, but it just disappears into thin air. I cannot drag this file into an application because there is no file.
This is very frustrating, Help.iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos to computer
You have a 2G iPod and the can play/sync only SD videos.
If necessary use a converter app to convert to compatible format. I use the free HandBrake -
I have created some partitions on my mac. it can not be restored how can I restore it please?
I hope you have a good backup.
https://discussions.apple.com/message/18877374#18877374
https://discussions.apple.com/message/16447467#16447467
https://discussions.apple.com/thread/3646296 -
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.
Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error??? -
why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???
Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop. -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have an idea of what the problem is? It has always worked in the past.
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
Maybe you are looking for
-
Hp officejet pro 8100 and ipad
Hello, I have installed two HP apps, HP ePrint and AIO remote on my iPad. I cannot get to print in black and white from my iPad but I can do anything from my PC. My PC has the printer set up in the control to print only black unless I need to print
-
wife has bought a new iPhone and when i tried to set up an iTunes account up for her it won't let me , has a error message saying her email address is associated with my account, also all my contact numbers have merged in with hers on my phone not he
-
How to share music on a single computer document doesn't show music in other account on the computer
Hello. I have 2 accounts on my Windows 7 computer and want both to access the same library. I have followed the instructions for sharing the iTunes Media folder to the public folder. I have moved the path appropriately on both accounts. However,
-
Table for Planned cost & Budgeted value with WBS
Hi, Which is the table where we can get WBS description & planned cost in PS? and any other table or report where we can see the comparison & see the balance of planned cost value and budget value thanks & regards,
-
Hi Experts, We are in ECC version 4.6B. In the programs using LDB PNP am facing a strange issue. In the selection screen I am restricting the data to personnel area say '20'. But still employee belongs to other personnel area are appearing in the rep