I have created two servers in my "Mail"

I have created two servers in my "Mail" and need to eliminate one of them, as I need to select the proper one, each time I send an email. I don't know how to do that. This is the message I get;
"The servers marked with alert icons are in conflict and cannot be saved. No two servers may share the same address and authentication settings. Please resolve the conflicts and try again"
How do I correct this?

Go to the Mail/Preferences/Accounts/Outgoing Mail Server.
Click on the drop-down list and choose "Edit Server List"
This should bring up a window with a list showing the two identical servers.
If you see two servers in the list that look the same, click on one of them and then click on the - (minus) button below the list to remove the server you've chosen to get rid of.
Depending on how the settings work out, you may need to go back and select the email account you want to work with and then choose the remaining server for the account to use to send mail (if it isn't already shown in the list).

Similar Messages

I have created two related books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

I have created two related Blurb books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

Unable to publish a single site when I have created two

Using iWeb 08, I have created two separate sites. When I select one and attempt to publish to a folder, both sites are included. I cannot find a way to publish one site only. Am I overlooking the obvious or is iWeb so impressed with my work that it insists that both need to be seen?

I ran into this same problem. I created one for my personal site and then another for my hobbies. The only solution that I found for this is to create a new user, in my case I just called it my website's name, and then publish the website to that user's site file. It's a workaround really, not a solution. But I have not found another way to do it. Hope it helps.

We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to acess the hidden partition in Win PE 3.0 environment using WMI

We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to access the hidden partition in Win PE 3.0 environment using WMI. VBScript code snippet used to detect the partitions is given
below:-
SetobjWMIService = GetObject("winmgmts:"_&
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
Select * from Win32_LogicalDisk")
It will return the partition which is active but fails to list the partition which is hidden. The same piece of code was supported on WinPE 2.0

I am giving the complete code, may be you are able to understand better. We are using Win32_LogicalDisk to retrieves the complete information of all the drives (like C:, D:) including removable drives.
Function
LocalDriveFound()
    strComputer =
SetobjWMIService = GetObject("winmgmts:"_
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
"Select * from Win32_LogicalDisk")
ForEachDiskDrive
IncolDisks
        DriveLetter = Left(DiskDrive.Name,1)
        DriveType = DiskDrive.DriveType
        VolumeName = DiskDrive.VolumeName
        WScript.echo Driveletter &
"|"& Drivetype &
"|"&VolumeName
SelectCaseDriveType
Case2 ,3
'Fixed or removable
If(VolumeName=USBVolumeName)
Then
If(DriveLetter<>
"Z")
Then
                    ChangeDriveLetterWithMountvol DriveLetter,
"Z"
EndIf
                bIsLocal=
True
EndIf
If(VolumeName=USBRootName)
Then
If(DriveLetter<>
"Y")
Then
                    ChangeDriveLetterWithMountvol DriveLetter,
"Y"
EndIf
                bIsLocal=
True
EndIf
CaseElse
EndSelect
Next
SetDrives =
Nothing
SetFileSystemObject =
Nothing
End
Function

I have created two tables for my new report under one transport request.

Unwanted table transported
I have created two tables for my new report under one transport request.
But I only need one table and the second table I was supposed to delete.
However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
how to handle this issue.
I am not sure any additional changes for this program.
Could you please suggest me an idea.
Thanks in adv

>
sam kumar wrote:
> Unwanted table transported
> I have created two tables for my new report under one transport request.
> But I only need one table and the second table I was supposed to delete.
> However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
>
> how to handle this issue.
>
> I am not sure any additional changes for this program.
> Could you please suggest me an idea.
>
> Thanks in adv
Does one custom table more or less really matter? If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

HT4314 We have one appleid user account and have created two game center logins, but can now only access one...any idea how to be able to access the other

We have one appleid and have created two game center login names under that one apple id. now we can only access one of the logins. does anyone know how to get to the other account

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

Why does mail create two folders for incoming mail?

Hi there,
i'm using the latest version of mac and i've set up a gmail (imap) account on mail. When i first created the imap account, all seemed in order, then after about 5 minutes of activity (i believe it was the moment i started composing my own email), Mail created a series of new folders under the standard "inbox, sent and junk" folders. There is now also a GMAIL tab there which has a bunch of subcategories like sent mail and junk and trash. when i receive new emails, they show up in both the default inbox and also in the gmail inbox. I'd rather just receive them in the default inbox because it looks like i am receiving double the mail and have to click both folders in order to mark the new mail as unread. any advice? hope i was able to bring my subject over clearly enough.
thanks,
jp

Welcome to Apple Discussions, janchy.
What you describe sounds like normal behavior to me. IMAP accounts create their own section in Mail's sidebar as well as sub-mailboxes in the standard mailboxes. If you see Sent/Trash/Junk as subfolders in the (white) Gmail folder, select each one in turn and click Mailbox menu > "Use this mailbox for...".
You should read my [User Tip about IMAP Gmail and Mail|http://discussions.apple.com/thread.jspa?threadID=1747527] (click the link), too.
At the moment it's also accessible at the top of any of the "Mail and Address Book" forum pages on this board.
floba
(MN565)

I have created two accounts for the same purpose and now I want to mix them without loosing anything. How do I do that?

Hi,
I have an Iphone and an Ipad with one email. There I have downloaded 3 ebooks.
Yesterday, I created an account at ID Adobe with another email. I have downloaded an ebook. I tried to downloading the other ebooks (I already have in the other devices), but was not able due to the a message related to license. I believe the different emails account is the reason. Please help me out. I thought that just my universities ID would be enough, but it is not.
How can I fix this problem without loosing any downloads?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

Help please, I have created two document folders???

I have somehow created 2 Document folders, now when I save a document I have to check both folders to find it. How do I fix this please? I have a Mac OS X V 10.6.8

Put all the files into one folder and delete the other. The default folder is the one you should keep. This will be the one in your /Home/ folder.

How do we create two completely separate address books?

Under our mailboxes folder, we have created two separate email accounts. How do we create an address book for each email account? (they need to be completely separate from each other)

This is easy. You can do an export (backup) and import of the address book. So get one you like, export it. Create a new one, export it. Now just import the one you want to work with. Just be sure to export it again before you import the other one, in case you have made changes.
I do this for separate mailing lists, etc.

Created two item by personalisation not showing in exact line

Hi,
I have created two date type fields through personalization i.e start date and end date under pagelayout region but these two items doesnt show in accurate line in my oaf page.
These two fields are showing vertically but not in same line there are some space between these two fields.
How can I show these two fields in same line by personalization because this is standard page.
I tried spacer too but it doesn't work.
how can I achieve this.
Pls help
Thans Amit

Hi
If you have created sales order for 21 line items and in delivery there are only 11 line items are copied then while in the delivery creation from the initial screen there could have been FROM and TO mentioned
If your answer is no for this then in the delivery overview screen there will be a message check the nodes in the log
Have you checked that?
The system will itself tell why?
From the top menu bar-edit--error log
Regards
Raja

Creating two dynamic action in a page

Hi,
I have created two dynamic action under the page_items(p6_item,p6_item1 both are hidden).
First dynamic action under p6_item is action1.
properties of action Event-> Change
Selection_Type->Item
Item-> p6_Item
Value-> show
(When i Hit the button viewall it should only display region1)
True Action:
sequence->10, Action->Show, Fire->Yes, Selection Type->region, Region->region1
sequence->20, Action->Hide, Fire->Yes, Selection Type->region, Region->region2
False action:
sequence->30, Action->Hide, Fire->Yes, Selection Type->region, Region->region1
Second Dynamic action under p6_item1 is action2
properties of action Event-> Change
Selection_Type->Item
Item-> p6_Item1
Value-> show
(When i Hit the button Search it should only display region2)
True Action:
sequence->10, Action->Show, Fire->Yes, Selection Type->region, Region->region2
sequence->20, Action->Hide, Fire->Yes, Selection Type->region, Region->region1
False action:
sequence->30, Action->Hide, Fire->Yes, Selection Type->region, Region->region2
Here the problem is, when i hit the viewall button it is not displaying region1 instead region2 is displayin region1 is hidden. when i hit the Search Button it is displaying region2 , region1 is hidden. Foer me, When viewall hitted region1 should only display not region2. When Search button hitted region2 should only display not region1.

Hi little foot,
I have created my page in apex.oracle.com. you can clearly see the issue which i am having in the page.
Workspace:listen
Username: [email protected]
Password:apex
Application Name: 45665
Page: page1

How to change my e-mail I created as my iCloud e-mail?

I have created iCould account but under mail, I accidently mistyped my name and this became my iCloud email address. How can I change that mail? for example instead of [email protected] I typed [email protected] I want to delete the mistyped email and create new email at icloud.com

You can't change your iCloud email address without creating a new iCloud account. However, you can create up to three email alias addresses, which will receive email in your current iCloud email inbox. This article explains how to do this: http://support.apple.com/kb/PH2622.
Some things to be aware of are that once you create an alias address it cannot later be used to create a new iCloud account, nor can it be moved to another account or reactivated if you ever delete it.

Accidentally created two accounts, LOST MONEY ON SECOND ACCOUNT!!!!!!!!!!!!

I've emailed the support group ten times and they haven't been able to remedy my problem yet. I was trying to use two gift cards and must have created two accounts(i don't remeber doing this) and now I have lost all the money that was left on the card in the second account. iTunes support knows that it is there, but cannot help me get to it, and they cannot apparently credit my accessible account with the lost funds. I am throughly frustrated and unconfident of iTunes from this incident. Any suggestions?

I have two accounts, same user and credit card, but one is for me the other for my wife. Ok I can log in, but when I go to make a purchase it tells me that the address isn’t a valid US address, but it is a valid address, and it’s the address I use for my billing address, in fact, it’s the same address I used with this account in the past and I had no problems. I hope you can resolve this issue.
17 "PowerBook G4 1.67 GHz Mac OS X (10.4.4)

I have created two servers in my "Mail"

Similar Messages

Maybe you are looking for