I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer.

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

Similar Messages

  • I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

    I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

    Quote from: Richard on 15-November-07, 20:33:05
    tornado2003,
    What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
    After that boot normally and install the latest nVidia ForceWare Drivers
    Take Care,
    Richard
    i guess you missed that:
    Quote from: tornado2003 on 15-November-07, 17:26:52
    ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
    ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

  • I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

    I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

    You should be able to use the battery if you get a car type charger which recharges mobile devices.
    The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
     Cheers, Tom

  • I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

    I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

    AppleWorks has never been available for legal download.
    Have you done the usual trouble shooting steps:
    Quit AppleWorks
    Delete most or all of the Recent Items list.
    Remove the Preferences files to the Desktop or to the Trash.
    Launch AppleWorks to see if the problems remain.
    You'll find Recent Items in:
    username > Documents > AppleWorks User Documents > Starting Points > Recent Items
    There are several preferences files.
    Go to:
    username > Library > Preferences
    Locate, select and delete the file com.apple.appleworks.plist
    Still in the Preferences floder, locate and open the folder AppleWorks.
    Select and delete the two Cache files and the Preferences file.
    Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
    Regards,
    Barry

  • Hi  I have Iphone 4 which the 2yrs warranty is over and now having problem with the phone LCD is flickering wat should i do.

    Hi  I have Iphone 4 which the 2yrs warranty is over and now having problem with the phone LCD is flickering wat should i do.

    Service Answer Center - iPhone - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=iphone  <-- enter correct country in drag-down menu once on page.
    Repair Pricing section - http://www.apple.com/support/iphone/service/faq/
    iPhone model     Out-of-Warranty Service
    iPhone 4, iPhone 3GS, iPhone 3G, Original iPhone     $149
    If out of warranty and you don't ever want Apple to repair it again ("Certain damage is ineligible for out-of-warranty service ...  unauthorized modifications."- http://www.apple.com/support/iphone/service/faq/, http://support.apple.com/kb/index?), search for third party repair services, e.g., http://www.iresq.com

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • We recently purchased the iphone5 (2) and are having problems with sound coming thru the earbuds when we plug them in to the iphones.  works fine with the ipad.  help please

    recently purchased the iphone5 (2 of them) and are having problems with the earpods.  no sound when plugged in to the iphone.  both phones.  works with the ipad.  help please

    Hi P5052,
    Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
    It is very unusual that neither phone is working with the new earpods. 
    Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
    The article below will give you the basic troubleshooting steps for this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    iPhone: Can't hear through the receiver or speakers
    Symptoms
    When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
    Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy
    <Edited by Host>

  • TS2634 I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry...

    I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too?  please let me know!

    Did you put a screen protector on the phone or did you pull the protective film off the phone?

  • I have a macbook and was having trouble with safari so I removed it and am trying to re-download but it says snow leopard and lion are too big. which version of safari can i download?

    I have a macbook and was having trouble with safari so I removed it and am trying to re-download but it says snow leopard and lion are too big. which version of safari can i download?

    Which operating system are you running? Not sure, click the apple on the left of the menu bar, the click about this mac. It will say version 10.6.x or 10.7.x.

  • Having problems with gradient fill.

    Having problems with gradient fill. Not sure how to select the gradient circles between outer circles consistently especially when there are more than 3 colors.

    Hi,
    It should be somewhat easier to try that out in landscape orientation. Does that help?
    thanks,
    Ignacio

  • OS X 10.4.x on PPC and Intel having problems with Card Readers

    Hello,
    I am in charge of a school district running about 75 client macs, all PPC G5 and Intel mixed. I have been having reports that the Lexar card readers for the digital photography lab sometimes do not auto-mount the media that is inserted into them. Apple System Profiler detects the card reader, but when the card is stuck into the reader it does not appear in finder at all to retrieve the files.
    Upon testing, a reboot usually alleviates the problem, but the teachers feel that the interuption in class and productivity time for a reboot is unacceptable.
    I have the user accounts managed through Workgroup Manager on my Xserve, and I have it set so that they have access to auto-mount media (unless I'm missing a setting somewhere. But i'd think if the setting was off, the reboot wouldn't matter and it wouldn't fix the issue).
    At anyrate, my question is has anyone else expierenced problems with card readers and auto-mounting the media in OS X? How about in a multi-user environment. Does anyone have any suggestions? All are welcome.
    Thanks so much for your time.

    Since the latest update Mac OS X 10.4.9, my USB card readers have stopped working. The media is recocognized, but the transfer rate is so slow I could manually write the binary.
    There were no issues prior to this update, and card readers work on machines NOT updated.

  • I bought a new MBA and are having problems with HDMI and VGA port

    Hi,
    I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
    Does anyboody has and idea how i will  or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
    Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
    thank you,

    Thank you doubr.  So what I need is to buy the thunderbolt cable  and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
    The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
    check the link below and you will see the ports the mba has
    http://www.apple.com/macbookair/specs.html
      if you see the ports that mba has, the two minidosplayport that are recommending do not fit..  
    So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I  need to buy another adapter for the minidisplay ports??
    thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

  • Did the update to Firefox today and now having problems with Comcast

    I did the update to Firefox today. I am able to log into Comcast, but am having trouble with staying logged in. I go to the home page, it tells me I am not logged in, so I go to the log in page, log in, and it takes me back to the home page showing that I am logged in. When I try to go access my email, instead of taking me to that page, it just takes me back to the log in page. It also does this when I navigate anywhere else on the site. Help!

    This can be caused by corrupted cookies.
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • I have an i pod and am having problems with sound. When I watch any video on the device with headphones the music is always too loud for the voice meaning i can't hear what is being said. This problem is accompanied with a buzz in some parts of the music.

    When watching a video with my headphones the volume of speech seams very low even when i adjust volume. The speech also tends to make a humming sound in places. When I listen to music humming is sometimes transmitted, but the volume level is normal. The problem is that when the video is playing i can only hear music and humming with the voice too quiet to hear properly. How can I make both volumes balanced? Also. This happens in all music videos.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • HT1473 I recently had to restore my laptop back to factory settings and lost my itunes music. I have imported all my cds again but i have some music on my ipad mini and am having problems importing this back into my itunes file. please help as this is dri

    I have recently reset my laptop to factory settings and whilst doing so have lost my music files. I have uploaded my cds but am having trouble moving music from my ipad mini back to music file or itunes.

    iTunes sync is one way from iTunes library to an iOS device.
    You will need third party software such as TouchCopy to transfer from iOS to your computer.

Maybe you are looking for