I have CS6 installed on Wiindows Vista 64x bit. Everyyhing is fine apart from inaccurate metadata. v

I have CS6 installed on Windows Vista 64x bit. Everything is fine except for some inaccurate metadata. Camera raw v 6.7 is displayed instead of the latest installed ver 7.1. Also lens serial numbers are not shown or are missing. In lens specification f/0 shows up which of course is wrong.
Can anyone shed any light on this?

Just to be sure, try a short procedure...
1. Open a raw file into Camera Raw.
2. From the fly-out menu select Camera Raw Defaults.
3. Convert the image, opening into Photoshop.
4. Check File - File Info. Do you see the problem there?
5. File - Save As a JPEG.
6. Check Properties of the file, ensure it's the one you just saved by looking at the date, and see if you see the problem there.
-Noel

Similar Messages

Have CS6 installed on Windows Vista, need to install on new Windows 8 omputer

The disk does not launch the installer. If I manually start the installer, it asks for a serial number. When I input the serial number, it asks for the associated product and CS6 is not shown in the drop-down menu as an option. (CS6 Extended is shown, but not CS6).
How do I get CS6 to install on the new Windows 8 computer?

Hi there,
Welcome to the Community!
It seems that you have bought an upgraded serial number of CS6 and it is asking for a previous version.
Do you have a previous version either from CS5.5 or CS5?
Please contact Adobe support to discuss further options, check it here: http://helpx.adobe.com/contact.html
Thanks!
Ankit

I recieved error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?

I received error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?
I do not want a trial version, Windows 7 op system.

Hi Mark ,
What flavor of CS6 you want to download ?
Please refer to the following link to select the desired flavor and you can license it by typing in your serial number.
https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Regards
Sukrit Dhingra

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032

jackg032 wrote:
Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032
Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop. You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
Windows 7 was billed as the first MS OS to need less system resources than its predecessor. If your system hardware will support 64bit, then consider paying $90 for an OS upgrade What is your system out of interest? I have a feeling you are running with just 2Gb RAM, which just isn’t enough. Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

HT1473 I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?

I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?

Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5721
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002FB7200B6E2500
Current user is not an administrator.
The current local date and time is 2014-01-01 16:14:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   PLDS DVD+/-RW DU, Rev
Audio CD in drive.
Found 15 songs on CD, playing time 55:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:13:47
Track 3, start time 07:40:44
Track 4, start time 11:32:54
Track 5, start time 14:33:34
Track 6, start time 18:24:06
Track 7, start time 22:00:28
Track 8, start time 25:36:27
Track 9, start time 28:47:47
Track 10, start time 32:56:24
Track 11, start time 37:07:54
Track 12, start time 40:11:29
Track 13, start time 45:02:62
Track 14, start time 48:42:65
Track 15, start time 51:56:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   24.
The drive CDRW speeds are:   24.
The drive DVDR speeds are:   24.
The drive DVDRW speeds are:   24.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there any e

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there anybody out there that can help me figuire outhow to make this work?

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

Getting error 2349 installing itunes on vista 64-bit. Please help!

getting error 2349 installing itunes on vista 64-bit. Please help!

I've been having the same issue for the past few months. Try this http://support.apple.com/kb/HT1926
go through each step of the general installation troubleshooting completely then restart your computer and try to install it again. It worked for me on the first try so hopefully this helps!

Installing iTunes on Vista 64-bit

*Looking for 64-bit support from Apple*
I'm running the 64-bit version of Windows and was disappointed to find out that Apple does not support it (see http://docs.info.apple.com/article.html?artnum=301301 ). I tried to install iTunes anyway and the installation failed. This forum didn't provide any initial solutions that I could find so now that I've figured it out I thought I would post a solution for those that come looking.
*How do I know if I have the 64-bit version of Vista?*
Press the windows key and the Pause/Break key at the same time (the pause/break key is normally in the upper right corner of the keyboard). On the window that appears look for the label "System Type." next to it you will see text indicating whether you have a 32-bit or 64-bit version of Vista.
*What Will happen if I try to install Vista?*
You experience may varry, but when I tried the installation ran for a while and ended with a message saying Quicktime could not be installed. I checked the Programs menu and iTunes was not listed after this failure.
*How do I successfully install iTunes on a 64-bit edition of Vista?*
When you download iTunes select the option to save the installation instead of running it immediatly. After the download completes right-click on the installation and select properties. Under the "Compatibility" tab check the box that says "Run this program in compatibility mode for." Ensure that "Windows XP (Service Pack 2)" is selected. Also check the box that says "Run this program as an administrator." Click on okay and the install iTunes.
*Will this also work for XP 64-bit edition?*
I don't know.
*I've successfully installed iTunes on my 64-bit machine. Can I use it to activate my iPhone?*
No.
If you try to activate your iPhone you will receive a message saying "Please connect iPhone to a computer running a 32-bit version of Windows XP (SP2) or Windows Vista."
*What happens if I set iTunes to run in Compatibility mode*
iTunes will detect that it is running in a compatibility mode and suggest that you turn the mode off and restart iTunes. Since it recognizes that it is running on a 64-bit machine it will still refuse to activate an iPhone. Bummer.
*If I activate my iPhone on another machine then can i transfer content to it on Vista 64-bit edition?*
Nope. iTunes will instruct you to connect the phone to a 32-bit machine.

Yes the forum has been misbehaving recently hence my double post. Ther should be an edit button, but it is only present for a few minute.
The error you are getting has certainly been associated with a failure of Windows updates, but I don't know if the one you mention is an issue.
The microsoft link to the update problem is;
http://windowshelp.microsoft.com/Windows/en-US/Help/ca7d15d7-8ee3-4993-bd01-753d adc904121033.mspx
That's about as far as I can go with this I am afraid.

Try to install iTunes on Vista 64 bit on a clean install but it refuses to install

I download the 64 bit version for install on my PC, but during install i noticed it was being installed to Program files (x86) which confused me. so I changed it to Program files in the setup preferences and proceeded to install. It gets half way through installing and gives up. Am I to guess that iTunes 64 is not really 64 bit at all but a psuedo to give it that impression. If it is going to install into a 32 bit directory then I have no recourse but to assume the latter.
Any ideas how I can get this to install on my Windows Vista 64 bit. Either way it comes up with scripting errors every time I try now. What is needed is an apple cleaner to get rid of elements of the old installs hidden in places like Appdata and the registry as well as hidden MSI scripts which stop subsequent installs.

An error occured during the installation of assembly 'Microsoft.VC80.CRT.type="win32="8.0.50727.6195".publicKey Token="1fc8b3b9a 1e 18e 3b".processorArchitechture="x86'''.Please refer to help and support for more information. HRESULT: 0x8007054f.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

6.5 install on windows vista 64 bit error USR0057

We can install v6.5 on a windows vista 32 bit, however, on a windows vista 64 bit we are getting the following error..."USR0057"
Defalut installed under the x86 file location, how can we get BO to load on the non x86 file location (simple under program files)
Thanks for the help!

hi
the point is that even if you get this somehow to work your customer will work with a version which is no longer supported in a an environment which was NEVER supported.Your customer must be aware of the risks that result from such a decision.
I would recommend either to upgrade your BO version or to downgrade the windows clients.a solution maybe a terminal server installation of the bo client.
sorry that i cannot provide you with a solution but you have to be aware of the risks you are facing.
regards
stratos

Elements 7 install fails on vista 64 bit

I, too am 1 of the many foolish enough to try to upgrade a program in Vista. I was foolish enough to think that if elements 5 would install in vista 64 bit, 7 would. That's what I get for thinking- I bought and downloaded PE7(which installed fine) and Elements 7 upgrade and here is the message
Log Name:      Application
Source:        MsiInstaller
Date:          8/8/2009 11:24:43 AM
Event ID:      11402
Task Category: None
Level:         Error
Keywords:      Classic
User:          Dana-PC\Dana
Computer:      Dana-PC
Description:
Product: Adobe Photoshop Elements 7.0 -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE32\Software\Classes\PhotoshopElements.Application\CLSID. System error 5. Verify that you have sufficient access to that
    <Data>Product: Adobe Photoshop Elements 7.0 -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE32\Software\Classes\PhotoshopElements.Application\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.</Data>
I ran the downloaded exe file an ran it as an administrator, with Norton turned off..........
any ideas?
       Confused

I ran the downloaded exe file an ran it as an administrator
Do you mean that you ran it from an account that has administrator priviliges, or that you right-clicked the downloaded .exe and selected Run As Administrator? On Vista, the two are not the same; if you haven't already, try the latter (Run As Administrator).

Oracle SOA Suite Install Error on Vista 64 bit

Hi All,
I am trying to install SOA Suite 10.1.3.1.0 on Vista 64 bit windows. I downloaded Correct version from the Oracle Site. when I click on Setup exe it is throwing following error?
"The Version of this is file is not compatible with the version of windows you're running. Check your computer system information to see whether you need x86(32bit) or (64bit) version o of the program " I saw couple of threads need to change the scripts to install.
Please let me know which script file I need to change?
Thanks in Advance,
-Venkat

Hi,
Iam also facing the same problem, how did you resolve it?
Pl let me know if you have a solution for this
Thanks
R.G

Trouble Installing PPCS4 to Vista 32 bit

I realized that PPCS5 requiers a 64 bit operating system, and I have a 32 bit operating system, so I installed the free 30 day trial version of PPCS4 onto my Vista 32 bit operating system.
I extracted the files after I downloaded them I extracted from .zip using WinRar to I extracted them to the directory "C:/Downloads/".
Then I extracted the .rar that contains the auto installer using WinRar to extract to the directory "C:/Downloads/Adobe Premier Pro CS4/".
Then I ran the auto installer. It says it is called "Setup.exe"
The auto installer said:
"Premier Pro CS4 and After Effects CS4, 32 bit support for CS5 installer: initializing
Checking system profile".
Then a few minutes later the auto installer said:
"Premier Pro CS4 and After Effects CS4, 32 bit support for CS5 - setup error
Setup Error
Setup has encountered an error and can not continue. Contact Adobe Customer Support for assistance."
This is the download link that I used:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5291&fileID=4921&fb_source=messa ge
Is this not a full installer and requieres the CS5 installer too? But the CS5 installer for PPCS4 is for 64 bit operating systems and I have a 32 bit operating system?
What do I do?

[Posts deleted until OP system issues resolved]

Qosmio F50 - Driver Install order on Vista 64-bit

Hello
I have a notebook Qosmio F50-10M with vista 32-bit home premium preinstaled.
I bought a new Operating System Vista ultimate x64. I want to make a fresh reinstal But i now also is VERY important the driver installation order to have a perfect result.
Can Somebody help me?
Sory for my bad English.

Hello
I have installed Vista 64-bit on friends Qosmio F50 successfully and here is installations order:
Windows Vista SP1 64bit
Chipset driver V8.7.0.1007
Storage Manager
Display Driver nVidia
Sound Driver
Network Driver
Touchpad Driver Alps
or
Touchpad Driver Synaptics
Card Reader Controller
Modem Driver TOSHIBA
Modem Region Select Motorola V2.2.3.x
WLAN Driver Intel
or
WLAN Driver Atheros
or
WLAN Driver Realtek
Webcam driver
Bluetooth Stack 64bit
Infrared Driver
TV Tuner
Value Added Package
Hardware Setup
Password Utility
FlashCards Support
Fingerprint Utility
Config Free
WPS Library
Assist
Dolby Control Center
Acoustic Silencer
TOSHIBA DVD Player
TRS Driver
HDMI Control Manager
TOSHIBA Gesture Controller
FaceRecognition
Good luck!

I'm trying to install the new Photoshop CC product. I have CS6 installed but ...

there's no option to install the CC product.
What's the deal?

The CC version of all products will be available on June 17 per the announcement at the Adobe MAX conference on May 6.
More info in general here http://blogs.adobe.com/creativecloud/huge-announcements-at-max/ and specifically on Photoshop CC here http://blogs.adobe.com/photoshopdotcom/2013/05/breaking-from-tradition-photoshop-cc.html.

I have CS6 installed on Wiindows Vista 64x bit. Everyyhing is fine apart from inaccurate metadata. v

Similar Messages

Maybe you are looking for