I have de-graded my system from Windows 8.1 to Windows 7,

I have de-graded my system from Windows 8.1 to Windows 7, I'm unable to find drivers for this, can you please provide it USB Mass Storage Device DriverUSB Composite Device DriverHigh Definition Audio Control DriverEthernet Controller DriverAMD Radeon HD 8210 DriverRealtek PCE Card Reader DriverPS2 Composite Device Driver

Hi: See if this graphics driver works... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709373&swItemId=ob_135683_1&swEnvOid=4063 Ethernet: Download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false Card reader: Download and install the first driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false Did you install the USB 3 drivers? If not, here they are. Install both and reboot. http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=4058 http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

Similar Messages

Have to delete Magic Mouse from MacOS to pair with Windows Bootcamp

Like many I couldn't get my Magic Mouse to pair in Windows when dual booting with BootCamp to Windows 8.1 on my 2012 MacBook Air.
Whenever I searched for bluetooth devices it wouldn't be found, or would sporadically appear but fail to pair.
The solution for me was to reboot into MacOS (where my mouse had already been paired, and automatically connected) and Delete (not disconnect) the mouse from Bluetooth settings.
Then when I rebooted back into Windows the mouse was detected under Bluetooth devices and could be paired.
I hadn't found this particular solution on the forums, and so thought I'd share.

Another follow up to this. I unpaired my Mac Mouse from Windows and gave it to a friend to try out on his Bootcamp MacBook Pro.
It unpaired from my Windows and re-paired to his Windows fine.
Then when he unpaired it from his Windows and gave it back, it wouldn't come up in the list of bluetooth devices for pairing on my Windows. It would in his though.
The solution was to boot back into MacOS on my laptop, where the mouse spontaneously connected, and delete it there. Then I could reboot back into Windows and find the mouse under bluetooth devices for pairing in Windows again.
This was despite not having logged into MacOS for over 6 months.
It's almost like the mouse reverted to being bound to the first device it ever paired with.

SG 300 seems to be preventing Windows systems from get an IP via Windows server DHCP

All the basics from the server are working and have been for years. I would appreciate not being asked to check the basics as "is the DHCP server registered".
There seems to be an issue where the VLAN is preventing DHCP from working. I have also read that MAC addresses don't get registered until there is a write. The issue also seems to roam. It affects different PC's at different times. I had this issue with this switch approximately a year ago.
Can I at least get some direction until I can post the firmware version and config. Its a busy small business and this issue is extremely unpredictable.
Thank you

Hi
check if you have DHCP snooping disabled (at least try to turn it off and see if it helps)
check if you are running Rapid version of STP protocol
check if all ports toward end-user devices are configured as spanning-tree portfast ports. if you are not use portfast, your port transition to forwarding state could takes longer time resulted that all DHCP discover packets from client will be just dropped on switchport site until port transits to forwarding state.

Advice needed on building first system from scratch...

Ok, here goes, I am so excited, like a kid on Xmas...My goodies from Newegg will be here later today or tomorrow....I recently purchased: A new tower, Antec PSU, 2x512 Corsair pc3200, MSI K7N2 Delta - ILSR and some other assorted crap....
Anyway, I have never built a system from the ground up before...I am looking forward to the challenge....But before I begin I was wondering if I could get some tips?
I already backed up all the files(photos, demos, benchmarks etc...)that I'll be saving...I also made copies of all the drivers I need to set it up when it's done(Nvidia graphics drivers, DX9.0b), I assume the mobo drivers will come with the mobo....I also want to do a fresh install of Windows as well.....Now my main concern is in regards to the order in which everything is done....I have replaced a motherboard before so I have a little knowledge of the inner workings....But never having built one from scratch, I'm a little leary as to the order and how everything should be installed....
I will also be adding my current Vid. card, sound card?(I'm pretty sure the onboard is better?) and HDD.....Windows came installed on my machine when I purchased it so I don't have the Windows CD, but I have made the set of recovery discs that is needed to set it back to factory specs and settings...Have I forgotten anything?...Any help would be greatly appreciated...Thanks!
Silly

Quote
Originally posted by GlennVidia
Quote
Originally posted by SillySider03
Thank you guys for all the helpful replies.....
Axel, thanks for the link...It was an informative read..
Glenn, I don't have an XP CD...The OS came installed on the computer when I purchased it.....I only have the 6 recovery CD's that I made under "PC RECOVERY TOOLS"...It's an older Compaq...Oh, and it's an AMD xp2400(can be unlocked using the Speed-Strip, currently it's locked because my mobo doesn't support the OC features I so desperately want to play with..Muhahaha ).....Also, I am currently downloading the Nvidia "Unified" driver and SP1....All of a sudden, something I was looking forward to seems like the scariest thing in the world....Will this thing even boot when I get it plugged in? How am I going to install all this crap? Geez, I'm worried now...
Bogs, I will try both on-board and SB Live 5.1....I play a lot of BFV and 1942, I'll see if I can tell if there is a performance and/or increase in sound quality....What tag do you play under? See you on the battlefield!!!
Thanks again for all the replies, Silly
Well first things first, follow my suggestions on the FSB settings until you are sure it's stable and the OS has been loaded and is stable as well before you introduce overclocking to the mix...
I am a bit concerned about your Recovery CD, Most likely it'll puke on you since the motherboard and EVERYTHING except the CPU has changed? Most likely it will halt and tell you it's not a (enter name) PC and cannot continue. Try it and see.
Maybe someone has a way around it and you can discuss that in either Private Messaging or via E-mail. Please keep that little tidbit out of the forums.
bogs dollocks,
Ahhh... think you're right there, however it could have been something completely different...but that's another topic entirely...
It will cause moe headaches than it's worth. Get an OEM copy of Windows. Better yet, borrow someone else's and use your key.

Export from Aperture to edit in Windows Live Photo Gallery

Hi.
I'm hoping to work collaboratively with a colleague, in a scenario where I take & edit photos, then pass them over for a possible final touch up before being forwarded to clients.
I use Mac OSX 10.6 and Aperture. He uses Windows Vista and Windows Live Photo Gallery.
The problem we've come up against is this: he is unable to edit the image I've exported from Aperture. I'm exporting as .JPG, and he's able to read them ok - i.e. load it into Windows Live Photo Gallery, but not alter the image.
Does anyone have a similar workflow, exporting from Aperture, then editing in Windows Live Photo Gallery?
Thanks in advance,
PB

Hi Frank.
Thanks for the response.
Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
If that is the case, I suspect ours might be a permissions issue.
According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
1. it's possible (i.e. someone else does it), and,
2. what's involved (at my end and/or his).
Thanks again,
PB

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Mac, would it be compatible with my computer when I put it in bootcamp? (I have all of the current software updates)

If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Macbook Pro, would it be compatible with my computer if I put it in bootcamp? (I have all of the current software updates)

In order to run Windows Applications, you must own the applications and, since they require Windows, you must own Windows. There are technologies like wine that will allow Windows applications to run without Windows, but they tend to be flakey at best.

I have changed my windows system from 8 to 8.1 and i lost photoshop elements 11 what now?

After a problem with a virus i change my operating system from 8 to 8.1 and i lost my photoshop elements 11 who is part of a pack of other software, i don't remember if i had regist the program or not but i remember i have used the program validate normal for this i change email's with adobe with the process of validation where are those email's

Hi,
You can download the trail version of the PSE from Download Photoshop Elements products | 13, 12, 11, 10 and then provide the serial key to get the full version privileges.
Do let me know if you need any other assistance.
Thanks,
Swapnil

I have recently upgraded my laptop from Vista to Windows 7. All my music is on a windows file, how do I move it to i tunes library

I have recently upgraded my laptop operating system from Vista to Windows 7. i tunes is asking me to sync my i pod, because it is recognising the Vista laptop and not the Windows 7. All my music has gone from i tunes library but it is all stored in Windows music folder(s). How can I move it all to my i tunes library?

So your iTunes library is now empty after the upgrade?
Simply drag the one folder (containing all of your music) into your new empty iTunes library or choose File -> Add to Library in iTunes.
Otherwise, if they aren't all in one folder, you'll have to drag each seperate one into iTunes.
B-rock

How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

Hi,
i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
hours of googling has turned up nothing...
System:
Macbook Pro 13 inch Mid 2009
Mac os: OSX Lion
Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

Alexander, I would like to apologize for the TERRIBLE answers you have been given so far. I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
I am a *nix user in general, and thus own a mac and a thinkpad. In fact I just got my thinkpad not too long ago. As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me. Ergo, I moved my Mac drive to my lenovo. On this drive I have a hybrid mbr which is no longer needed. So my thoughts are this:
From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems. This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space. For instance, fdisk or other MBR only partitioning systems. Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system.
If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually. The way I would recommend, is using gdisk (gpt fdisk). It is command line only, but the syntax is pretty easy:
$ sudo gdisk /dev/disk0
Assuming you are using your mac partition and your primary hdd is disk0. That will put you into an interactive session of gdisk. Enter "?" for command options. What you need is the "recovery and transformation" section which is the "r" I think. From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it). When it asks you for the partitions you would like to include, just hit enter. It should then ask you if you would like to create a protective entry for the remainder of the empty space. This is what you want so tell it to do that. After you are done, "w" will write and exit. You may want to first use the "p" to print and ensure that you have what you want. You can proabably check your work by using fdisk as so:
$ sudo fdisk -l /dev/disk0
I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread.
Cheers!
PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

HT200158 How do you to access Microsoft windows 7 files systems from OSX mountain lion

http://support.apple.com/kb/HT4697 describes how to enable access to Microsoft windows file systems from an OSX lion system.
Mountain lion does not have this entry.
Now that I have a mac with Mountain LIon installed,
how do acces the files on a Microsoft windows 7 system that I have previously accessed?

Well as I pointed out in my post, "Sadly, my Text Edit documents are still all there, every single time I opened them and made a small change, there is another copy stretching all the way back to the day I installed Mountain Lion." so if you can explain to me how July 26 - Aug 16 is a week, I will concede that it is a good idea. Short of that, no I have been capable of making my own backups since I was 16 years old (16 years ago) I don't need my computer to endlessly do it for me in a way I am completely unable to shut off. That's what I have external hard drives, flash drives, a DVD burner, Drop Box, E-mail (as in emailing copies to myself) and icloud for. If I am doing something and I don't have access to a single one of those options, I don't know why I brought my computer with me in the first place. And I don't see how you can say it's an illusory gain in disk space, hundreds of copies of text documents, garageband files, Final Cut files, Motion Files and basically any program that makes files onto my comptuer that I can myself make incremental changes to, those all need to be stored somehow. Again, if you can explain to me how July 26 - Aug 16 is a week, I will agree with you that that is a good thing because IF it only saved for a week, it wouldn't be an issue. Sadly, no matter how many links you post, I still have text edit backups stretching from today back to July 26. They're not going away and I have no reason to beleive any other file I edit is going to go away either since they haven't been. They're all there eating up HD space and this imaginary "week" limit is simply not coming into effect. I hate it and there needs to be a simple way to simply shut it off. I didn't spend hundreds of dollars on external drives just for my main hard drive to be filled up with hundreds un useless, undeletable backups of stuff I already have backed up.

Operating system from Windows 8 to Windows 7

I recently switched opreating system from Windows 8 to Windows 7. I have no driver loaded for SM Bus Controller. How can I locate this to load the driver?

Perfect.
Below is the link to the driver you need. Download and install the AMD chipset drivers and reboot.
You want the first file listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

TS1389 I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the p

I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the problem.

Honestly, all the people in all the world that look at this forum, no-one can tell me why my itunes is causing my machine to fall over?
I wiped the machine and started again. Fresh XP install, fresh iTune download, fired it up imported one album and bang. Over it went. I've PC Checked the hard ware, mad onioned the system to see if it's a resource thing but it's rock solid until i open iTunes. Then after every re-boot, the message is back in the event log.
This:
Source iPod Service Event ID 0
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Can someone at least reply to let me know I've not typed this in dutch!! :o)
Cheers
David

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

I have de-graded my system from Windows 8.1 to Windows 7,

Similar Messages

Maybe you are looking for