I have dmwr mx 2004 and also installed dmwr cs3
I have dmwr mx 2004 and also installed dmwr cs3 , well when
modify a file in one, links etc update to the other ?
"123polis123" <[email protected]> wrote in
message
news:g0oc8p$gjl$[email protected]..
>I have dmwr mx 2004 and also installed dmwr cs3 , well
when modify a file
>in one, links etc update to the other ?
Your site files don't reside 'within' either version of DW.
They reside
wherever you define on your HD, or anywhere you place the
files. DW doesn't
care, you just have to tell it where the files are in your
'Site'
definitions.
Alan
Similar Messages
-
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?msmedia wrote:
I do not currently own OS X ML.
I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition. -
If I already have the android SDK and AVD installed from prior installation for eclipse do I have to
If I already have the android SDK and AVD installed from prior installation for eclipse do I have to do it again for dreamweaver if I want to develop for android ?
Also, if I'm developing for android, ipad, and iphone and I want them all to be the same can I do it by only making one site or I have to make a different site location for each?Inquire of whom? Apple? Seems to me your carrier is giving you the run-around. They are the ones who provide the service, so they should be able to tell you the plan specifics. Get on the phone again with them and insist on an answer.
-
Do you have to download Lion and also lion server , or just lion server ?
Do you have to download Lion and also lion server , or just lion server ?
And also will you have all the features of snow leopard server ?Yeah it is a bunch of apps that you will download from the App store WWDC Keynote by Phil Schiller. "Server isn’t another operating system. It’s just a bunch of applications you can purchase to run on top of Lion. " And in terms of upgrading to Lion server, i read an article that explains the process as this:
"Snow Leopard Server - You can not upgrade to Lion directly. If you try to run the Lion installer on Snow Leopard Server, it will first look for the Server.app in the “Application” folder of the Mac. When you have that in place, the installer will first install Lion. Then, when it restarts, it will walk you thru some very minimal steps for the Server.app (hostname confirmation, admin email, etc). At that point, the Server.app will take your Snow Leopard Server settings and upgrade them. This will include migrating OD to 10.7, updating LDAP, importing data, etc. This can take some time. "
That is for snow leapard server specifically. If you come from a basic snow leapard installation, that is when you updrage to Lion and then download and install the server apps. -
I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?
I have the same problem with the right click and do not have the ask toolbar installed on my system?
-
I have deleted the program and re installed numours times, also ran a full essential scan, spybot and malware byte scans with no results. Any ideas?
Nobody has had or has this problem? I have gone back and forth with itunes "help" people for 2 weeks with no "help" at all. I guess I am going to have to buy a non apple devise and shop @ amazon for my music.
-
youtube video is not playing on my mac pro laptop. Just a blank screen shows up where the video should be playing. I have norton anti virus and firewall installed on the laptop. Could it have something to do with it?
unless you have a partition for another operating system, such as Windows or Linux, most mac users would agree that any a/v software is completly unnecesary and will do more harm than good. There is a free a/v in the appstore called "ClamXav. Have you installed all software updates and also have you tried youtube using different browsers (chrome, safari, opera, etc)?
-
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
Just hooked up my Apple TV. It's great. I have a satellite receiver and also a multi room sound system where I would like the sound to come through. Can anyone tell me how I would connect to accomplish this. My HDMI is connected so the sound is coming through my TV just fine. I would like it to come through my sound system instead. Your assistance is very much appreciated.
goaliemother wrote:
Hi:
My system is as follows. 1 only HDMI output on TV. I purchased an HDMI switch box/unit. I have the output from the Switch Box Unit going into my TV.
I have 5 inputs on the switch box unit. 2 I have used.....
1 input from my television satellite receiver
2 input from my Apple TV
My other equipment is
1 home theatre system. This is where the sound from my TV goes through
1 russ sound whole home sound distribution system
When I play my Apple TV I am still getting the sound of my satellite TV.
This suggests that your satellite receiver is connected to your "home theater system" (which I will shorten to AVR "Audio/Video Receiver") for audio. Is this correct?
If so, then your problem is that you're switching video inputs, but not audio, and what I listed as (2) applies:
2. You can connect the ATV to the TV using HDMI. Then you can either:
2a. Connect the TV to the AVR using an optical cable for audio.
2b. Connect the ATV to the AVR using an optical cable for audio.
You've connected the ATV to the "switch box" instead of the TV, which amounts to the same thing, as you're just expanding the number of HDMI ports on the TV by using the switch. So your simplest solution is either 2a or 2b. If your TV has an audio out port, and it's the same kind of port that your satellite receiver uses, you can just disconnect the audio cable from the satellite receiver and plug it into your TV. You may have to enable "external speakers" or whatever they call it in the TV settings. This would be best, because then you wouldn't have to change inputs on the AVR to select the correct audio; you would just change inputs on the switch, and both video and audio would switch between the satellite box and the ATV, solving your problem. Note that an optical cable is required to get Dolby Digital 5.1 audio (surround sound), and I mention that because it's possible you're using an analog audio (RCA) cable. So an optical cable is best.
Beyond this, I would really need to know your TV and AVR model numbers, preferably accompanied by links to specification pages or manuals, and it would be very helpful to know how the satellite receiver is connected to the AVR for sound. -
OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit. -
I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on
Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.
-
I have windows 8.1 and having installed icloud 3.0 cannot view my contacts in Outlook 2013
I have windows 8.1 and having installed icloud 3.0 cannot view my contacts in Outlook 2013
This fixed the issue:
1. sign out of iCloud. (make sure you are really signed out or it won't work!)
2. open Outlook and make sure iCloud is not listed in Account Settings
3. close Outlook
4. sign in to iCloud and let it set up Outlook sync
You shouldn't need to reinstall anything. Just remember that when you first look at your calendar/contacts in Outlook it will default to show your Outlook (saved locally) calendar and contacts. You may need to select iCloud to see them. -
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi All, I have built a stacked vertical bar chart in one of my applications and now am trying to have a line on these stacked bars. Is there any chart type available for the stacked bar combination. Please advice. Thanks, Prasanthi.
-
Build Button in Encore CS4 Greyed Out
Hi working in a College using CS4 Suite Encore on a LAN. When an administrator logs on the Build button is OK. When student user logs on Build button greyed out and unavailable. What needs adjusting to allow student users to make the Build button
-
Hi, I am making a custom renderer using the copyPixels function for my Haxe/Flash game. So I have this kind of code : buffer.bitmapData.copyPixels(m_CurrentSkin, RECT3, POINT, null, null, true); where : -buffer is the bitmap where all my scene's obje
-
Batch action in CS6 ignoring my destination folder!
I have an action I have been using once every year for several years in a batch automation process in Photoshop. Its purpose is to resize all the images in a specified folder and save the new versions (using the same filename) in another folder. Both
-
IT0210 withholding Info W4/W5 US allowances error
Folks, The issue is with respect to IT0210 withholding. While maintaining "FED", irrespective of the filing status, allowance defaults to "0" and the field is greyed out when "tax exempt indicator" is maintained. However, the allowance accepts and s