I have doubt in pp module....

i have doubt in pp module....
i want to know relationship between pp tables (s901,s902,s903,s904)
and bomtables (mast,stpo,stko,stas)
because the material(element) available in pp tables is not
exists in bom tables.
key: plant,material,sub material
i thought that data pbm in bom tables....
i want to clear that all ( plant,material,sub material) records
must available in bom tables.....
in my system....
( plant,material,sub material) records available in pp tables.
but not in bom tables

STKO                    BOM - header
     STPO                    BOM - item
     STAS                    BOMs - Item Selection
     STPN                    BOMs - follow-up control
     STPU                    BOM - sub-item
     STZU                    Permanent BOM data
     PLMZ                    Allocation of BOM - items to operations
     MAST                    Material to BOM link
     KDST                    Sales order to BOM link
Check these tables....

Similar Messages

Doubt in function module BAL_DSP_LOG_DISPLAY

Hai, guys,
i have doubt in the function module BAL_DSP_LOG_DISPLAY.
actually after executing the functin module bapi_acc_document_post, how to pass bapi return table to this function module bal_dsp_log_display.
if any one know means please tell me with sample coding.
thanks in advance.
From Elamaran.

Hi Elamaran!
Did you try to use SE37 with this module and use "Where-Used List" (CTRL + SHIFT + F3)? This should give you enough examples to look through.
Best regards
Wolfgang
Message was edited by: Ralf Wolfgang Geithner

I have created a data module in s1000d application of framemaker 10.While publishing it in publication module it says"File does not exist".

1- I have created a data module in s1000d application of framemaker 10.While publishing it in publication module it says”File does not exist”.
2- Does FrameMaker 10 supports s1000d 4.1 ?

See Lorna...it's almost second nature to you now,
editing those js files! I TOLD you you could do it!
Mark, it's EERIE that you should say this to me today because this is exactly what I have been thinking! I can put a song on a page with one eye shut now, and I can zip around those files pretty well (except for the recent fiasco where I didn't even look at the right folder). I also notice that the level of my writing is sounding more technical and familiar with digital world jargon. I remember how you told me I could do it, and you were right. You all were right and I feel more knowledgeable and at a point where I suspect that I can take steps on my own. HTML is a strange land, but just being able to edit that .js file and FIND it by navigating for it in Text Edit has made me feel much more competent.
Before iWeb I didn't realize what Text Edit was for. I used it to take quick fast short notes. I never understood that concept of "opening something up in so and so application." The first time I clicked OPEN in Text Edit, and I saw all those danged files staring at me with beady eyes, I wanted to throw a white hanky and run for the hills. Not any more!
Lorna in Southern California

I have doubt in Read statement

Hi All.
I have doubt in Read statement .i need to convert following select statement as read statement .how can i change help me.
IF p_field1 IS INITIAL
     AND p_field2 IS INITIAL
     AND p_field3 IS INITIAL
     AND p_field4 IS INITIAL
     AND p_field5 IS INITIAL.
    SELECT *
          FROM zdbt
           INTO TABLE itab
           WHERE field5 = p_field5
           ORDER BY PRIMARY KEY.
    IF sy-subrc <> 0.
      MESSAGE s035.
    ENDIF.
ENDIF.
regards,
Jay.

hi
The READ statement is as below:
When u have a table already with values and to improve the performance u need to use this.
Reading Lines of Tables
To read a single line of any table, use the statement:
READ TABLE <itab> <key> <result>.
For the statement to be valid for any kind of table, you must specify the entry using the key and
not the index. You specify the key in the <key> part of the statement. The <result> part can
specify a further processing option for the line that is retrieved.
If the system finds an entry, it sets SY-SUBRC to zero, if not, it takes the value 4, as long as it is
not influenced by one of the possible additions. If the internal table is an index table, SY-TABIX
is set to the index of the line retrieved. If the table has a non-unique key and there are duplicate
entries, the first entry is read.
Thanks
Shiva

I just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

hi i just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

thanks for the information about speakers. and i mean the battery back up the battery i always getting lower even im not use. and can u pls tell me how to check this as a brand new or not. b'coz in the store they gave me replacement phone without boxing. the phone was coverd by wrap and they never give any receipt for this

I have doubt on filters

Hi,
I am Praveen ,I have doubt on servlet filters.
First i can create a servlet ,in that servlet i can store some Text message to servlet and again in that text mesage can send the response to the filter.but it can not come pls reply me
public void doFilter( ServletRequest request, ServletResponse response,
FilterChain chain ) throws IOException, ServletException {
response.setContentType("text/plain");
PrintWriter out = response.getWriter();
CharResponseWrapper responseWrapper = new CharResponseWrapper((HttpServletResponse)response);
// Get response from servlet
StringReader sr = new StringReader(new String(responseWrapper.toString()));
// out.println("The result is "+sr);
out.write("Filter latered the response");
out.write("\n \n");
out.println(sr);
chain.doFilter(request, responseWrapper);
out.flush();
I am Writing this code ,But output will not come.
Plsssss

try placing chain.doFilter(request, responseWrapper); after out.flush();

HELP.........I have produced a training module and the reporting at the wont do what I need.

HELP......... I have produced a training module and the reporting at the wont do what I need. I need it to tell me what percentage of the test I have scored which it does but then I need it to tell me which questions I got wrong without giving me the answers.

The seller needs to follow this procedure:
http://support.apple.com/kb/TS4515
If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
Regards.

I have a macbookpro may 2010 with Intel core 2 duo processor can i upgrade to osx mountail lion ,i have doubts that the macbook becomes very slow on this processor

macbook pro 2010 with 2.4 Ghz intel core 2 duo can i upgrade to mountaion lion ,i have doubts that it becomes very slow

Welcome to the Support Commuities. See under Supported Models here:
OS X Mountain Lion Technical Specifications
...Although your MacBook Pro is supported, it may be advisable to wait until OS X 10.8.1 or 10.8.2 in order to avoid the possibility that your Mac slows down due to bugs in 10.8.0.

I have doubt regading...response.sendRedtrect,

Hi,
I have doubt regading...response.sendRedtrect,
That is, it possible to send Session object, one server to another server..using response.sendRedirect.
i would very thankful to give this answer,
Thank you
Ramesh

To my knowledge, response.sendRedirect will be a fresh request. So a new Request object will be created and you will lose all information that you had in your previous request object, including session.

Hello sir, Hello sir. Plz clarify me... My frnd have iphone 5s sealed pack. He purchased it from uk..he told me the phone is unlocked..but i have doubt phone is locked or unlocked..plz help me how can i know phn is locked or unlock???

Hello sir, Hello sir. Plz clarify me... My frnd have iphone 5s sealed pack. He purchased it from uk..he told me the phone is unlocked..but i have doubt phone is locked or unlocked..plz help me how can i know phn is locked or unlock???

hellow sir i have iphone 3gs but its unofficely unlock .
can i update my iphone ?

I have doubts in interface

Hi all,
I have doubts in interface . You please help me.
My question was
i have two interface. and also i have only one method in both interfaces.these method are same name in both interface
Now i implement these interfaces in my class it's work properly. it doesn't through exceptions.
But i have changed the return type of methods,
ie i put int for one
and void for another one.
it throws exceptions . duplicate method access.
how to i solve this problem? did u catch my point?
please help me Advance in thanks.

i have two interface. and also i have only one
y one method in both interfaces.these method are same
name in both interface
Now i implement these interfaces in my class it's
work properly. it doesn't through exceptions.
But i have changed the return type of methods,
ie i put int for one
and void for another one.
it throws exceptions . duplicate method access.
how to i solve this problem? did u catch my point?Yes I caught it. The solution: don't do it. Methods differ by name and argument type list. Return values are not looked at.
Another solution: have the methods take different arguments. Or rename one of them.

I have new memory modules, 2x2 2GB DDR2 --800 SO DIMM0 to install in I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

I have new memory modules, 2x2 2GB DDR2 --800 SODIMM MAC to install into I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2111+RAM+Replacement/5196

I have used F4IF_FIELD_VALUE_REQUEST function module.but i am not getting t

Hi friends,
I have 2 screen fields EQUNR & EQKTX.i have attached custom help to EQUNR.when i select value from f4 help then i want corresponding value from search help should get populated in the EQKTX field.
I have used F4IF_FIELD_VALUE_REQUEST function module.but i am not getting the result.
DATA: lt_return_tab      TYPE TABLE OF ddshretval.
DATA: lw_return_tab      TYPE ddshretval.
DATA: lv_equnr LIKE eqkt-equnr,
        lv_eqktx LIKE eqkt-eqktx.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname                   = 'EQKT'
      fieldname                 = 'EQUNR'
      searchhelp                = 'Z_EQKT'
      SHLPPARAM                 = ' '
     dynpprog                  = sy-repid
       dynpnr                    = sy-dynnr
     dynprofield               = 'GW_SCREEN-WPTXT'
      STEPL                     = 0
      VALUE                     = ' '
      MULTIPLE_CHOICE           = 'X'
      DISPLAY                   = ' '
      SUPPRESS_RECORDLIST       = ' '
      CALLBACK_PROGRAM          = ' '
      CALLBACK_FORM             = ' '
      SELECTION_SCREEN          = ' '
    IMPORTING
      USER_RESET                =
   TABLES
     return_tab                = lt_return_tab
    EXCEPTIONS
      FIELD_NOT_FOUND           = 1
      NO_HELP_FOR_FIELD         = 2
      INCONSISTENT_HELP         = 3
      NO_VALUES_FOUND           = 4
      OTHERS                    = 5
IF sy-subrc = 0.
    READ TABLE lt_return_tab INTO lw_return_tab INDEX 1.
    IF sy-subrc = 0.
     MOVE lw_return_tab-fieldval TO lv_equnr.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = lw_return_tab-fieldval
        IMPORTING
          output = lv_equnr.
      SELECT SINGLE eqktx
        INTO lv_eqktx
        FROM eqkt
        WHERE equnr = lv_equnr AND
              spras = sy-langu.
      IF sy-subrc = 0.
        gw_screen-wptxt = lv_eqktx.
        gw_screen-equnr = lv_equnr.
      ENDIF.
    ENDIF.
ENDIF.
Please provide the solution.

I have written the same code as you said but still its not giving me the equnr value.
DATA : lt_dynpread1        TYPE STANDARD TABLE OF dynpread,
          lt_dynpread11       TYPE STANDARD TABLE OF dynpread,
          lw_dynpread1        LIKE LINE OF lt_dynpread1,
          lw_dynpread11       LIKE LINE OF lt_dynpread11,
          lt_return_tab1      TYPE TABLE OF ddshretval,
          lw_return_tab1      TYPE ddshretval,
          lv_equnr1           LIKE eqkt-equnr,
          lv_eqktx1           LIKE eqkt-eqktx,
         lt_eqkt            TYPE STANDARD TABLE OF eqkt,
          li_dselc       TYPE STANDARD TABLE OF dselc,
           lwa_dselc      TYPE dselc.
TYPES: BEGIN OF lty_eqkt,
        equnr TYPE eqkt-equnr,
        eqktx TYPE eqkt-eqktx,
        END OF lty_eqkt.
DATA: lt_eqkt TYPE TABLE OF lty_eqkt,
        li_dynpread    TYPE STANDARD TABLE OF dynpread,
        lwa_dynpread   TYPE dynpread.
DATA:
        lg_condition    TYPE string.
TYPES: BEGIN OF lty_eqktx,
           sign(1)   TYPE c,
           option(2) TYPE c,
           low       TYPE eqkt-eqktx,
           high      TYPE eqkt-eqktx,
          END OF lty_eqktx.
DATA: lt_eqktx TYPE STANDARD TABLE OF lty_eqktx.
DATA:lw_eqktx TYPE lty_eqktx.
lwa_dynpread-fieldname = 'GW_SCREEN-WPTXT'.
APPEND lwa_dynpread TO li_dynpread.
CLEAR lwa_dynpread.
Read Screen Field Values.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = li_dynpread.
Read the first record as only one record will be present
READ TABLE li_dynpread INTO lwa_dynpread INDEX 1.
gw_screen-wptxt = lwa_dynpread-fieldvalue.
CLEAR lw_eqktx.
lw_eqktx-sign = 'I'.
lw_eqktx-option = 'CP'.
lw_eqktx-low = gw_screen-wptxt.
APPEND lw_eqktx TO lt_eqktx.
CLEAR lw_eqktx.
IF gw_screen-wptxt IS INITIAL.
    SELECT equnr eqktx
         INTO TABLE lt_eqkt
         FROM eqkt.
ELSE.
   MOVE 'EQKTX CP GW_SCREEN-WPTXT' TO lg_condition.
*lg_condition = GW_SCREEN-WPTXT.
    SELECT equnr eqktx
         INTO TABLE lt_eqkt
         FROM eqkt
      WHERE eqktx IN lt_eqktx.
ENDIF.
lwa_dselc-fldname = 'F0002'.
lwa_dselc-dyfldname = 'GW_SCREEN-WPTXT'.
APPEND lwa_dselc TO li_dselc.
CLEAR lwa_dselc.
lwa_dselc-fldname = 'F0003'.
lwa_dselc-dyfldname = 'GW_SCREEN-EQUNR'.
APPEND lwa_dselc TO li_dselc.
CLEAR lwa_dselc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'GW_SCREEN-WPTXT'
PVALKEY                = ' '
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
      dynprofield            = 'GW_SCREEN-WPTXT'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
      value_org              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = lt_eqkt
FIELD_TAB              =
      return_tab             = lt_return_tab1
      dynpfld_mapping        = li_dselc
EXCEPTIONS
   parameter_error        = 1
   no_values_found        = 2
   OTHERS                 = 3

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

Have doubt?? Can any one clear it

Hi guys i have doubt.It will be nice if
some one clears it
around.
Question:
when making a connection to the database using
ConnectionPooling should we close
connection,statementobject and resultSet.
like this(this is the way i am doing too.)
try
---opening a connection,rs,stmt
other code
}catch() {
finally{
if(rs!=null)
rs.close();
if(stmt!=null)
stmt.close();
if(conn!=null)
conn.close()
Doubt:
Is it not Sufficient to close the connection.Can any one
explain in detail why resultset and statment should be
closed.

From my understanding, close releases resources on the object, so I would suspect that each DB driver implements their resources independently. It would be DB driver specific if closing the connection would cascade the resource cleanup to any objects that were created within that connection. I perform the same logic you do at the end of my DB calls. I have each in a try/catch since close throws SQLException, and I would prefer if each got the chance to execute. I don't do anything with an exception if close fails, because there really isn't anything you can do.
try {
      ...something to DB
}finally
   try {
       if(rs != null )
          rs.close();
   }catch(Exception e){}
   try {
       if(cursor != null )
          cursor.close();
   }catch(Exception e){}
   try {
       if(conn != null )
          conn.close();
   }catch(Exception e){}
}

I have doubt in pp module....

Similar Messages

Maybe you are looking for