I have dought about i_step 1 and i_step2
hi one and all
i hav dought in customer exit with i step1 and i_step2 any one tell me when ill we use ths plz send documantation to me with senarios
regards.
Hi,
If you want to add a new field which is not available in your Datasource then you have to go for Enhancements.
See these links.
u2022 SAP Network Blog: Extract Checker Extract Checker
u2022 SAP Network Blog: LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it! LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
u2022 SAP Network Blog: How to retain deltas when you change LO extractor in Production system How to retain deltas when you change LO extractor in Production system
u2022 SAP Network Blog: Custom fields and BW extractors: Making a mixed marriage work! Custom fields and BW extractors : Making a mixed marriage work! (Part-II)
I hope this will be help you.
assign points if this helps..
Thanks......
Vasu.......
Similar Messages
-
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
I have a "firmware file not compatable" message whilst trying to update my iPhone4 from Sofftware Version 5.1 to 5.1.1 via iTunes. I have tried about 3 times and keep getting the same message. Any ideas/suggestions?
Since posting the above - I have now tried downloading the update on my iPhone rather than via iTunes, and its just worked and installed and seems fine! Was a lot quicker as well than the download time via iTunes
-
Hi my I phone has just gone dead it has about 50% charge and wont turn on. It dont seem to take a charge either?
Any ideas my whole business revolves around this bloody thing with out it I am *********
Can some one help please??Hello, gypsumspring.
Thank you for visiting Apple Support Communities.
Here are the best resources to go through when experiencing this issue.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H. -
i have pulgged my phone in and i've been waiting about two hours now and it hasnt turned on when it is saying it is charging. What should i do? is it broken?
Hi there ella_dunne,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
I have questions about audio timing and volume levels
I have a question regarding editing the audio timing. There are a few section in my clip that the rythym is a split second off. What technique can I use to sync up the time by just a fraction of a second?
so far I've tried use the re-time editor which I thought was gonna work but after I re-timed the section, I couldn't drop it back into place without having the lower clip change and make things more confusing, but I had a feeling I was doing thing right for a second. Was I on the right track or is there another way of doing this?
on another note...
I have some sections in my clip that are peaking in the red, but sound fine on my computer even at full volume. I hear no distortion at all. Does this pose as a problem, and should I re-adjust?
how to connect cuts in final cut proThis is actually a somewhat complicated subject. There are actually several different kinds of sync issues. Two major "classes": 1) some audio seems to speed up or slow down over time compared to other audio, and 2) audio that just needs to be aligned in time.
One of the biggest culprits for sync issues is mixed bitrates. A typical FCPX project should default to an audio bitrate of 48kHz. If you have 44.1kHz (or other bitrate) clips, mixed in, the first thing you should do is make sure all your audio clips are conformed to your project.
Select your clips and then select:
[Note: when retiming clips, even if only slightly, make sure Preserve Pitch is selected.]
If that doesn't work, or your audio is "live" recordings and you'd like to tighten up performers timing a little, you can manually sync audio tracks to each other. (You should have at least one audio "track" with the best timing to be your "beat track".)
The idea is to find the events you need sync'd in the audio waveforms; which means listening and seeing the pattern in the waveforms (turning on "scrubbing" helps); and you should find these indicators as close to the end of the clip as possible (you will need to zoom into the clips to see them clearly enough and you will need room to access the retiming slider on one of the clips... so... near the end is best.)
Zoom into the audio clip on the storyline so you can see the waveform clearly, but not so far as to lose detail in the "subsample" range -- to start (it's very difficult to distinguish specific peaks if you zoom in too far.)
With the audio clip selected and the playhead placed on the start of the "event" (bass beat, tom/snare hit, cymbal, etc.) type the M key to set a marker (markers on audio clips can be set on subsamples, so it will be "inside" a single video frame range.)
On corresponing clips that you want to sync with the "master" clip, do the same thing: select the clip, find the corresponding "event" start for that clip, move the playhead to the beginning of the event (you might have to zoom in [command- +] on the storyline one or two times more to improve the resolution), type M to set a marker.
You now have two markers you can align by retiming one (or more) of the clps to match the "master". Use the playhead and have it 'snap' to the master's marker. When you retime the others, visually align their markers to the master's by using the playhead as a visual indicator for alignment.
This technique can be used with video and audio that has gone out of sync, by finding the visual indicators of a specific sound in the video, setting a marker to mark the start of that event, then finding the audio event and setting a marker. You will need to detach the audio from the video first if you're going to work on it in this way.
It's even easier to sync audio if there are no retiming issues (that is, you just need to align clips, not retime them.) Find the position markers as in the description above (anywhere in a clip since retiming is not necessary), turn on snapping, drag one of the clips until the markers snap... and you're done. You don't even need to use the playhead to have the markers snap to alignment with each other. Very convenient for adding foley/sound effects to video.
HTH -
Error report on win 8.1 about conhost.exe and werfault.exe
I am not sure exactly what is happening, but I have noticed recently a new problem with CONHOST.EXE and werfault.exe each time I was opened application. and I didn't know exactly about was there have relationship with my brightness control
(increase or decrease) than I can't make any change after first time I have noticed about conhost.exe and werfault.exe. and other problem than my laptop more 'slowly' than before, but the console window will remain open fastly enough. (The host process
exists, but I can see an orphaned CONHOST.EXE for the application in Task Manager.)
I hope someone who sees this knows why this is happening, and can help me fix the problem.
Thanks!Hi,
Here is the details about conhost.exe process:
Windows 7 / Windows Server 2008 R2: Console Host
http://blogs.technet.com/b/askperf/archive/2009/10/05/windows-7-windows-server-2008-r2-console-host.aspx
Same within Windows 8.
The werfault.exe is used for Windows Error Reporting.
You can go to event viewer to check if there are any error messages.
For this kind of issue, you may also try Clean Boot to see if this problem persists.
Alex Zhao
TechNet Community Support -
I suddenly can not open pdf files. I have had Adobe Reader Xl and just ran into this problem
I have had adobe reader xl for some time and suddenly can not open a pdf file. I received an email yesterday with a pdf attachment which I can not open. What could be my problem?
Hi Pat, My operating system is Windows 7, Home Premium Service Pack 1. My email client (email Provider is Cox Communications - Cox.net).
Can not in my post means I tried to open a pdf attachment to a email. I received nothing happens. I do not get a blank screen or any messages. Nothing Nothing happens at all. I can click several times and get no response.
I did discover that by clicking on the Adobe Icon on my deskt topi get an Adobe box containing "Do you want to allow changes to your computer. I click Yes and get to my computer where I can find the above mentoned attachment which I think I had previously saved. I then get the attachment whick I can print. This may be printing from my hard drive - I am not sure. I think I could go through this procedure every time I want to open a atachment but it seems a long way around.
Any help you can give me would be appreciated. I have thought about removing Adobe and reinstalling. Maybe there is a corruption to my Adobe file.
Jim -
So, I have just about had it. For nine days now, I have valiantly tried to move my library to an external drive. At first, I attempted to move it to my 2TB Time capsule. iTunes didn't like its new home though and moved home without telling me. So then there were two libraries. I meshed them back together reluctantly and iTunes in a silent revolt, absolutely refused to use its own 'Keep Library Organized' criteria and may as well have thrown my music against the wall. Seriously, my 5 year old nephew has his computer files better managed. Then I bought a 3TB Time Capsule and you may ask yourself why??? Well, iTunes doubled in size- although when I ran apps that are designed to find duplicate iTunes files, it deleted the music I actually bought from iTunes. So then I watched as iTunes got it back. How you ask; I run a MacBook Air, iMac and Mac mini in my house - as soon as one powered up it hit the net like a sailor on leave and re-downloaded it all without abandon. I tried to keep the libraries separate, no success there. I tried to keep them unified; iTunes response was to ask me if I wanted to join iTunes Match every time I logged on to my computer and on any computer - my iTunes match song number has been as high as 24,367 and as low as 11,112. And I can't simply refuse iTunes. No one refuses iTunes. Refusal to allow iTunes Match to run through all 24000 songs again was to revoke my rights to the songs that were once part of my library. If I took a long time to decide or was visibly impatient while iTunes did its little 3 hour scan it would arbitrarily decide that music I bought from iTunes was ineligible for iTunes Match. How could that possibly be??? I am missing music, or at least iTunes tells me so by showing me that lovely exclamation point. I have tried backing up my computer to do a full system restore and start all over. Time Capsule claims I have 979 GB of data and takes its sweet time to even back up one gig (about 18 minutes) even though I can transfer files to my Time Capsule at about 1 GB every 40 seconds. I guess though performing back-ups are somewhat like government jobs; it will get done, when it gets done. The back up requirement of 979 GB is surprising though, my Mac claims that I currently occupy just about 25% of my 2TB drive. The discrepancy, who knows, but I think the solution lies somewhere in iTunes. But maybe iPhoto. But that is for another time.
After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive. -
hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me
If Other (the yellow bar) is too big something is corrupted. The only solution (that I know of) is to restore from your most recent backup using iTunes (see http://support.apple.com/kb/ht1766).
-
I need advice on getting more storage for my iPhone 6. I have just bought more iCloud storage, but it didn't help. I only have about 100 picture and 6 apps. I also recently purchased music and it won't let me download it to my phone because there is no storage. Any suggestions on getting more storage for my iPhone?
iCloud storage has nothing to do with the memory available on your iPhone.
Have you tried a reset?
Also, see this article:
If you get a "Not enough free space" alert on your iPhone ... -
contacted a vendor about an app and they have not returned my email. I want to cancel the purchase. What should I do?
You probably cannot get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, particularly if the app is defective in some way. If you just don't like or no longer need the app, a refund is unlikely.
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
I have Firefox 8 for Vista, and according to the "About" screen, Firefox is up to date. I heard this might be a problem with my plugins, so I updated them all. Still a problem. I disabled all my plugins and add-ons and still got the message.
ONLY 8 people have this problem?
Look, virtually all Mozilla's potential users are coming from Internet Exploder, which gets this ALMOST RIGHT, while FireF*x does it totally wrong. Including in webmail: there's no way I could have got to this forum without leaving 4 windows active or closing everything, including closing my mail without logging out.
ONLY 8 PEOPLE? How many thousand simply throw up their hands & uninstall yr f- nurdware over this one single issue? Not to bore you with details, but I'm hardly unsympathetic to open sources that don't look like the best argument for Micros**t and Google hegemony.
Btw, I said they get it -almost- right... It would be really nice if IE or >somebody< offered a checkbox to NEVER close multiple tabs. Look, if this bug disguised as a feature is useful to a few nurds by all means keep it as an advanced option, but PLEASE set up FireFox so it at least defaults to the real world. -
I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
When I recently updated to the newer version of FireFox, (version 3.6.13) the DownloadHelper add-on was lost, and it will now not re-install, though I have tried about 5 times?? When I clicked the icon to download the add-on the download progress bar indicated that the download was underway however, when it had completed, the add-on appeared not to have downloaded - including no icon - not even if I search for one. When I tried to download the same add-on again, the download window indicated the download in a faded color and it seemed to be indicating that I already had the add-on. Try as I might, I can't get it to work. DownloadHelper always worked with no trouble on the previous version of FireFox. Are you able to help? Many thanks for this service!
Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (Firefox 4: click the Tools button at the left side of the Search Bar) to do a compatibility check.
You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
* http://kb.mozillazine.org/Resetting_preferences
* http://kb.mozillazine.org/Preferences_not_saved
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Maybe you are looking for
-
How to change font size in a call-out tool box?
Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks. Sherman
-
Standard report to see the Batch numbers for the materials
Hi Gur's I am searching for a standard report that would give out details from the purchase order. The details that i need are as following fields 1. Purchase order batch, 2. Purchase order number 3. material can you any one help me on this regards A
-
Itouch is disabled - cannot get it to work or show up in itunes
My daughters itouch is disabled. She forgot her password. I have a new laptop and all of our other itouchs and ipads are syncing fine. This one is not being recognized. How can I get it to show up in itunes so we can reset it? Is there another way ar
-
TS1208 question: conflicting dhcp range
Hi out there Am after a basic language easy to follow instrution to resolve the above I have a TC as my main wifi router, with an extreme and express as part of the network. I have the above message on my TC, and I have absolutely no idea how to res
-
Will a T-shaped A1222 charger work with my 2010 15" MBP?
The charger that came with my MBP was L-shaped, but I'm wondering if a T-shaped one will work too. (If I understand correctly, A1343 is L-shaped and A1222 is T-shaped... can someone clarify this for me?)