I have downloaded the latest software but it has set my phone to the incorrect time, 8 hours earlier than it is so alarm didn't go off this morning as I hadn't noticed! Won't let me change time. Apps look like cartoons designed by a child. V unhappy
I have downloaded the latest software but it has set my phone to the incorrect time, 8 hours earlier than it is so alarm didn't go off this morning as I hadn't noticed! Won't let me change time. Apps look like cartoons designed by a child. V unhappy
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.
Similar Messages
-
Can the OS for an iPod Touch be updated beyond 3.1.3? iTunes tells me that this is the latest software but many apps won't run on this older os.
If you have a 1G (first generation) iPod touch then it can only go to iOS 3.1.3. To identify yours:
Identifying iPod models
If you need a higher iOS, you will have to get a newer model iPod. -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
I have updated my apple tv 2nd generation to the latest software but it shows the itunes symbol with the usb. Anyone know why this might be? Thanks
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help
Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.
-
Itune has the latest software but songs don't open when i double-click
itune has the latest software but songs don't open when i double-click
Hi herbertfromhooge mierde,
It sounds like you are having an issue with playing software in iTunes for Windows. I have an article for you here that will help you address this issue:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
After being prompted to download the latest software my iPad froze when it got to the Terms and conditions part. It's now totally frozen, any suggestions?
Reset iPad and start all over again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Help. I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us). Ever since downloading the update, we cannot access movies, play movies, or access iTune store. We can play YouTube videos so the problem is not related to the connection. It happens only when we are trying to access Movies. Very confused. Our AppleTV was working fine until I did the new software update. Now this problem! Help!
re-add the shared lib
check the firewall on the computer -
I accidently unplugged my I-pad 2 from my computer during the latest software update and my screen is stuck on the "apple with update bar."
Suggestions?Try and force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.
No.
You must restore. -
I used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?
If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans -
I have just tried to update iTunes to the latest software and now I keep getting error messages. I have uninstalled and downloaded the latest version without any success. Any advice please?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time? -
My phone has locked up when downloading the latest software. it is asking me to restore my phone, which if I do I will loose all contacts. Can u hekp?
If it's asking you to restore it then it's already too late and you've lost it.
-
Updated to the latest ipad software yesterday now my apps are greyed out and under the ap is the word "waiting" they are not loading Help what can I do to get them to load?
I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!
-
I have Pages, created a document in it LAST NIGHT and today it will not open, advising that I need to have the latest version of Pages to open. I have the latest version and it STILL won't open! Help! Thanks!
You leave us to guess what you think is the "latest version".
You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter
Maybe you are looking for
-
Can form content be locked from some users?
I've been tasked with creating forms to be sent to clients. Trick is, there's form data for the client to fill out and form data to be filled out here in the office (client number, for example). Is there anyway to setup a form such that we can enter
-
Hi I am working with inventory managemnt.I am facing few issues in update rules like:- 1.I am not able to find coressponding source info objects for the customized one . 2.I am not able to find the some of the charactertics mapped to their info objec
-
Any way to create a keyboard shortcut for keywords in Bridge CC?
Just curious if there's any way to create a keyboard shortcut for "new keyword" and "new sub keyword" in Bridge CC? If not, that would be a welcome addition in any future Bridge update - being able to customize keyboard shortcuts or add your own the
-
Hello Experts, Iam Using sql server 2008 R2 SP3 with Merge replication as topology. I found approximate 125 tables are not having clustered indexes on our database. this is the out come of my analysis after some research on the performance issues com
-
Hi, this is not really a problem but i am properly confused by the purpose or the way labview works. as i am doing the 2d interpolation for some image analysis, i converted the loaded image into a 2D array. it took me a while to figure out the inde