I have downloded elements 10 but when clicking the picture it wont come up in elements 10 edits
I have used a disc to download elements 10. But when I go to my files to load a picture it wont come on to edior
Did you try renaming the application in Program Files (x86)\Adobe
N.B. Program Files on 32 bit systems.
Similar Messages
-
I had iTunes for a couple days, went on yesterday to sync my phone and iTunes was no longer on my computer. It now no longer let's me download it, I need iTunes!!!
See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
tt2 -
Can't log on. Never used it before, Yahoo primary browser
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Firefox, Thunderbird & Quicken were active when I loadad & ran a slot machine game. When I exited the game & clicked the icon to return Firefox to full screen, I could see the image flash off to the right side of my monitor screen and disappear. When I again clicked on the icon in the task bar, the reverse happened- the image flashed from the right down to the icon. When I hover the mouse pointer over the icon, the open screens show up with the red X to close but the same thing happens when I click on that box. The other two programs that were open while the game was active are working fine, only Firefox has been affected. I cannot open the program to access any of the menu items as I cannot get the screen image on the monitor. I did uninstall the program and reinstall a freshly downloaded copy I had to use IE, as I am now) but with the same results when I run it. I did chose to save my settings so if something has been changed there then that might be the problem.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
[SOLVED]Netcfg works great manually, but when using the daemon it wont
I installed netcfg a really long time ago following the arch wiki. When I first installed it and set everything up, it was all working perfectly.
For the past three or four months Ive been having problems where netcf daemon is failing to connect (home wireless network 256bit wep). It takes about 20 seconds just waiting and eventually says failed. If I log in and run the command manually (sudo netcfg home-wifi) it connect perfectly fine every time.
Ive tried everything I can think of including different QUIRKS and changing permissions on the profiles but nothing works. I also tried using the netcfg menu but it doesnt work like that either. I went over the wiki page again thinking something might have chnaged, but its all the same. I even reinstalled and configured again but still nothing.
heres my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand vboxdrv loop)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(home-wifi)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng crond hal cpufreq !network net-profiles @netfs @alsa @sensors @mpd)
What gets me is that it actually takes longer to fail then it does when I manually connect. It times out for like 20 seconds, but when I manually connect its almost instantaneous.
Last edited by tjwoosta (2010-03-02 05:31:37)I had arch installed on my Sony VAIO, had this problem, and then fixed it somehow. That was several months ago, recently I fried the laptop so I just reinstalled and can't remember. But now I have a "solution" haha
this is kind of silly how I got it to work, though.
I created another profile "home-wifi-boot" with a short timeout, this is called from rc.conf.
then I put "/usr/bin/netcfg home-wifi" in my /etc/rc.local , which is exactly the same but has a 30 sec timeout.
This just does the same thing as I was doing manually, runs netcfg a second time. It works for me!
Last edited by jamba (2010-02-14 15:30:58) -
So, my ipod will not stay on, when I take it off the charger it just goes dead. I cannot plug it into the computer and have it go on; I guess it doesn't have enough power for the battery. But, just the other day, I unplugged my ipod (went dead) plugged it back into my kitchen and now it goes on but an ITunes icon pops up and says for it to be plugged into it, but like I said it doesn't work on the computer. So, now I lost all my pictures but I was wondering how I can get them back? Or get rid of the Itune icon to actually get back on my ipod?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ONLY SOME songs appear in song list, but when clicked, play a random song instead of the one i chose. You can play the song on iTunes, just not the ipod nano. (the one that has a clickwheel and looks almost like a square)
You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device. If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match.
Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy. -
I have just rented a film and clicked the menu button instead of pause. When I go back to the film to rent again it says I have already rented this go to settings and check for downloads. But there is no download option in settings?
It does... Apple TV has a problem with the assignment to the itunes account after updating. Restore to factory settings or unlog and news login to the itunes store helps to see the rented/downloaded film(s).
-
My iPhone is showing that I have one unread message but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
On my iMessage app it says that i have received a message but when i click on it nothings there
On my iMessage app it says that i have received a message but when i click on it nothings there
I have thi sexact problem, is there no solution?
-
i woke up in the morning and my iPhone said i have to activate it but when i click the activation icon it says oops try again later
Exactly the same issue here in Hungary. I have the iOS 7 Developer release. I think this has to do something with the iOS7 Activation lock, http://support.apple.com/kb/HT5818 I just don1t get why I cannot unlock with my password.
Restore is not available in iTunes as I have the find my phone turned on on the device, it says I should disable the feature in the iPhone, but I'm not able to "log-in"
Catch of 22 -
The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?
Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT -
I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect. Was able to connect at school, but not here at home all of a sudden, help?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have a gift card but when I try to redeem it ask me for a code number, I am not sure which number to use but have tired all three that are on the gift card but none have worked. Can anyone tell me which number to use.
If it looks like this: click here then use that code. If it looks like an "O" it is actually a zero.
Maybe you are looking for
-
Save for Web & Devices window doesn't fit @ 1366 x 768
I'm using a MacBook Air running at 1366 x 768, or within Adobe CS5 requirement tolerances, but whenever I try to 'Save for Web & Devices', the dialogue box that pops up is much too big, vertically speaking, for my screen. Attempting to minimize/maxim
-
Every time I go to the itunes store, I get the pop up "Itunes has stopped working and must close" Under Details are : Problem Event Name: APPCRASH
-
I have a new ipod. When I connect the ipod to my computer the computer does not register its presence through itunes. What might remedy this problem.
-
In motion you can add a flop filter to a clip and it flips it horizontally or vertically. Is there such a thing in FCP?
-
Why my full name appears when I write a review for an app?
When I write a review for an app, my full name appears! I would like to use a pseudo but it seems that I can't! Does somebody have/had the same problem?