I have East/West Symphony.  Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony. 
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Similar Messages

  • HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

    I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
    Thanks

    it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
    Best
    Steve

  • I have a samsung craft, will it work with my phone? should it? i have metro pcs as provider

    I have a Samsung Craft phone and it appears not to be compatible with firefox mobile, will it ever be? I have MetroPCS as my service provider does this have anything to do with it?

    Sorry, Firefox is available only for phones running the Google Android or Nokia Maemo operating systems. For more information, see [[Will Firefox work on my mobile device?]]

  • Old USB Quattro interface--will it work with Logic Express 8?

    I have an old m-audio USB Quattro interface (4in/out) which I used with Cubase years ago. I have it hooked up to my wife's intel iMac with more than enough RAM. Logic seems to run fine, but I get a very weak signal through the interface. Apparently I have the correct driver. I don't mind buying a new interface if this one is not going to work, but the hard part may be in determining whether or not it will work. M-Audio doesn't seem to know (I'm less than thrilled with their support). Any experience or thoughts on this?
    thanks!

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • Working with Logic Express and Sibelius Student

    Help! I just downloaded Sibelius 6 Student edition and my Logic Express 9 files are playing back with all voices as piano. What's the fix?

    Hi,
    you probably have to change the program select value at the start of each MIDI track and/or select another MIDI channel for this track.
    Fox

  • I have a Sony Sa ns300, will it work with airport express to allow me to play iTunes in another room?

    I have a Sony NS 300 will it work with airport express?

    Not from the iPad, but you can from a computer.

  • I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac.  I work with two screens and now I seem to have programmes at the top of both screens which I didn't before.  any advice?

    I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before.  Can you please help me?

    Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
    I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
    After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
    Good luck to you...

  • I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

    I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

    Not sure what to say. Have the free version, installed it and GB found it. Perhaps contact East West support if you have a paid version...

  • I have Windows 8.1.  I have had MageMaker 7.0.1 working fine on desktop for MANY years.  Had to get a new hard drive.  Now computer doesn't read the PM DVD. so I can't reinstall it.  Can anyone help?

    I have Windows 8.1.  I have had PageMaker 7.0.1 working fine on desktop for MANY years.  Had to get a new hard drive.  Now computer doesn't read the PM DVD. so I can't reinstall it.  Can anyone help?

    Sorry, but the chance of ever getting PM to work on Windows 8 is somewhere
    near zero.
    Buy a very old computer or move to a new application.

  • I bought logic studio with compressor 3.5 what happens if I buy compressor 4.0, will it work with Logic? should I get a free upgrade since I bought it recently?

    I bought logic studio with compressor 3.5 what happens if I buy compressor 4.0, will it work with Logic? should I get a free upgrade since I bought it recently?

    I don't see any problems but I haven't used it a lot.

  • Does mainstage work with logic express 9

    hi ,  do all the features and plug-ins work with logic express 9 or are some features disabled .
    or are they not compatible at all
    thanks

    I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
    THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
    GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
    REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
    DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
    SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
    WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
    GOOD LUCK EVERYONE.

  • I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

    I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

    It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
    * Open the web console below the error page by pressing Ctrl+Shift+k
    * Right-click the blank area and turn on logging of the request and response bodies
    * Resubmit the request by clicking the reload button
    * Click the new URL that appears to open the viewer showing the headers and bodies
    There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

  • 01v96i Yamaha...will it work with logic pro X

    I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
    Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

  • I can't get east west symphonic choirs to work in logic

    Hi,
    I'm having huge problems with the EW Symphonic Choirs software. Firstly I followed the videos that come with the discs and it works to a point. but then it all goes horribly wrong.
    It says that I should create a midi track to record into and output the details of this track to an audio track. The only thing is that when I play these notes in the audio track they're all a semitone below the midi track! I can't understand this at all. So basically I have a melody that sounds all in simultaneous semitones, excrutiating for the ear!
    Then, there are only two possibilities for voices as the wordbuilder that comes with SC only has 4 ports. So it is impossible to play even an SATB! So in a sense its not really choir software at all, more like a vocal ensemble since you can only combine two of the 4 voice groups.
    More problems occur when I try to bounce the track, awful as it sounds, off to an aif. When listening back I get the voices cutting in and out with crackling sounds and stuttered speech. Also I can also hear the click as well crackling under the voices. I have never heard anything like this before with other software.
    Is there some setting that will fix this? My RAM is only 2.5, maybe this is a problem?
    I tried contacting the East West support team but they don't reply. To be honest this is putting me off ever buying anything from them again. I might get a refund soon if these problems persist.
    Any help you have would be greatly appreciated.

    Hi every body,
    First of all sorry for my bad english I'm from Switzerland
    I myself acquired one east west choirs, and I encountered the same kind of problems.
    But I have a new mac pro 2.4 Ghz 12 GB RAM processor 2*6 core.
    It Looks like I should be able to hack the pentagon to install this program correctly.
    First, it often bugs, it crashes 2/5.
    It also crashes when I load the WordBuilder,
    when I load a bank, and I add one more, there are problems with the transpose. And very difficult to manage the problem touching the transpose cause bank load more than 8-10 samples and sometimes nothing moves when you touch the transpose.
    Notes are also arranged on the keyboard completely strange way, for example, a bank plays in C in the middle of the keyboard and the same bank plays in G to the bottom notes, so you're in big **** even if you manage your transpose problem. The same instrument change tone!
    So when I mix the bank I find a lost bottom note, lost at the top of the keyboard while playing and angelic note by mistake! The only way it's tu put down the transpose to get off this note but after you turn back with your tonality problem.
    I contacted the dealer. He told me to uninstall the program and the re-install, describing me a procedure for mac which steps doesn't really appears like in the dscription.
    I bought extansion that goes with this and I'm really angry given the price $ 600.
    Is there someone who knows what program it is, is it a big scam or a monumental BAD series???
    I wanted to buy the strings and brass too, but I strongly believe that I'll never approach an east west product or other product that would use the PLAY WIZARD, it seems they decide to sell technology that is not at all successfull and finished.
    Could someone help, some one who has got this application and could answer; even if it's to hear "throw this **** to garbage and forgot" lol

Maybe you are looking for