I have elements 11 and see no way to rearrange album images?

I cannot figure out how to rearrange my photos within an album (no numbers to grab and drag in the upper left corner). No drop down menus with any kind of option? What am I missing?
Thank you,
Dwight Donnelly

Hi, (in reference to my elements 11 photo sorting problem within albums)
I have tried to do what you have suggested but without any luck. I can get to "edit" by doing a right click on a particular album and can move photos around within the small 2 photo wide panel on the right but that proved quite laborious. The album pictures showing in the main panel on the left have no numbers in the left hand upper corner and the images cannot be moved.
I have Elements 10 on an old PC and went back to it to see if I would have a similar problem. I did not. I was able to get the album photos numbered and then able to drag and drop to reorder them. I wonder if I were to uninstall and then reinstall my Elements 11 if that might solve the problem?
I thank you for your assistance!
DMDJ

Similar Messages

Have Elements 11 and I get a Run Time Error when going into editor?

I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library

Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
   Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
    Runtime Error
    Program : C:\Program files
    THis application has requested the Runtime to terminate it is an
unusual way....
   PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]>

It is not unusual for me to have a half dozen + copies of a single image. I am not creating these additional images which appear spontaneously myself so system must be causing them. I have Elements 12 and operating system Windows 7.

I have Elements 12 and operating system Windows 7. It is not unusual for me to have a half dozen + copies of a single image. I am not creating these additional images myself, so must be the system. Deleting (including from the hard drive) does not help. Can anyone help please?

1- The only way for picture files to be automatically added to the catalog is to allow the 'watch folders' option in the file menu and not choosing to have the organizer warn you of any addition. If those files are already in the catalog they should be ignored, only new files should be added.
2- Otherwise, there is a downloader option to ignore duplicates when you import from camera or card reader to avoid importing several times from the same card.
The Organizer considers files are duplicate when they have the same 'date taken' and size in Kb.

I purchased Premiere Elements 13. Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem.

I purchased Premiere Elements 13 & Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem. What are my options? Do you have a compatible program for WinVista similar to Premiere Element?

deniseu
This is not Adobe. Please do not duplicate threads. I have answered one of at least 3 of your threads currently appearing at the top of the list of threads in the Adobe Premiere Elements Forum tonight. Please see
I purchased Premiere Elements 13 and it is not compatible to Win Vista which is my operating system. What are my options?
New to Premiere Elements 13....it does not support Windows XP, Windows Vista, and OSX 10.7.
Also see
Removed features and unsupported file formats | Adobe Premiere Elements 13
In your other thread which I have cited above, I have posted a list of choices ahead of you. There is no workaround to get Premiere Elements 13 to support Vista, XP, or OSX 10.7 that has ever surfaced.
ATR

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

The D7100 requires camera raw 7.4 which is not compatible with Photoshop Elements 10.
Your two main options are
1) Buy a newer version of Photoshop Elements
2) Use the Adobe DNG converter to convert the NEF files to DNG files which can then be used by Photoshop Elements 10.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!

I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!

And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names."

I have elements 9 and just a day ago everything was fine but now all of a sudden any time I try to convert or save my project or even burn it to a DVD the program shuts down on me.

I have elements 9 and just a day ago everything was fine but now all of a sudden any time I try to convert or save my project or even burn it to a DVD the program shuts down on me.

connermac8
Is the crash/shutdown for this one specific project or does it occur in new projects as well?
On what computer operating system are you running Premiere Elements 9 and are you running Premiere Elements as the 9.0.1 Update?
In cases such as these, the first factor to rule in or out are the preferences/setting file. Here you want to delete the Adobe Premiere Elements Prefs file.
The directions to its location will vary with the operating system. So the operating system information is important to post. Some of the many factors
that we need to evaluate
a. does the problem exist with and without antivirus and firewall(s) disabled.
b. are you using a pen and tablet device instead of a mouse.
c. does your computer need a clean up/clear out - is your computer optimized
Your answers to the questions above will help us to customize and plan appropriate troubleshooting strategy. So, let us start with the above and then decide what next.
Thank you.
ATR

I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
1. Upgrade to PSE 10 or 11.
2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
Mac:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

I currently have Elements 10 and run Mac OS 10.7.5. Can I upgrade to Elements 12? 13?

I currently have Elements 10 and run Mac OS 10.7.5. Can I upgrade to Elements 12? 13?

Thank you for your help
Sent from Gary's iPhone

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset t

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset the tools. Help! Thanks!

Check under Image> Mode that RGB Color is selected.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I have Elements-3 and needto upgrade; how do I do this?

I have Elements-3 and wish to upgrade?

Not sure what you're asking. Do you use the windows organizer? If not, you just buy PSE 11 and install it. Most of the time you can buy the regular non-upgrade version for quite a bit less than adobe charges for the upgrade if you shop around at big box stores and amazon. For PSE the upgrade is just a pricing thing--every version is a complete standalone version. However, if you want to buy from adobe, any registered owner of any version qualifies for the upgrade price.

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Karen ...
Might be corrupted preferences (.plist)
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.image_Capture.plist
Click Go then move the com.apple.image_Capture.plist file to the Trash.
Restart your Mac and your scanner and try scanning an image.

I keep getting a "Transcoding error" when I try to burn a blu ray. I have elements 8 and the clip is only about 8 1/2 minutes long

I have 4gb of ram and running Vista. Dont know why I keep getting this error, its not like I'm burning a full 2 hour movie.
any help would be appreciated.

b
Thanks for the update.
Please remind me, are you still working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1, and are your plans to incorporate your new internal hard drive into the Windows Vista 32 bit computer setup?
In Photoshop Elements 8, the path to the Scratch Disks should be Full Editor/Edit Menu/Preferences/Performance and the available Scratch Disks choices there. See Description under the Scratch Disks list for overall suggestions.
In Premiere Elements 8.0/8.0.1, the Scratch Disks will be found under the program's Edit Menu/Preferences/Scratch Disks.
Just do not move, delete, or rename any files/folders that are source media in a saved/closed project.
Major consideration is to check the new drive periodically to confirm that the drive letter is ot changing on you.
Did you know that you can import a raw format image into Premiere Elements, but you need to install the Camera Raw plug-in in Premiere Elements as well as Photoshop Elements. But, in a 32 bit operation and dealing with the huge dimensions of the raw image, image size is going to be a consideration in Premiere Elements 8.0/8.0.1.. The program will not let you import a still image with a total pixel count greater than 16777216 pixels.
ATR Premiere Elements Troubleshooting: PE: Maximum Still Image Size
More later. Sounding good.
ATR

I have elements 11 and I did the 30 day trial of elements 12. When the trial expired it caused problems with my elements 11. Nothing opens correctly, some not at all and I can't get help?

Please help me. I am so disappointed in Adobe. I was planning on upgrading to 12 after the trial period but was unsure still. The problem I am having now is that my PSE 11 Organizer is off the grid. When I right click on a file and go to "open With", it only offers me the option to use Premiere Elements and not Photoshop. I found the .exe@ file for Photoshop Elements 11 and created a shortcut to my task bar in order to get to it. That won't work on my organizer though. Should I just uninstall and reinstall the whole thing? I'm on Windows 8.1. I refuse to upgrade to 12 after being refused any support considering it was the trial they encouraged me to try that caused my problem.If I have to reinstall everything with it impact the projects I've created?

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I have elements 11 and see no way to rearrange album images?

Similar Messages

Maybe you are looking for