I have enabled "standalone" mode in the CICM utility and now cant connect to KVM

Hello. I am VERY new to the UCS environment, and while trying to configure RAID on one of my servers (a racked c240, managed through UCS), I enabled "standalone" mode while kvm'd into the server I was working on. And of course, I can now no longer access the server. Is there some way in which I can undo this via the UCS Manager console, or would a keyboard and monitor need to be physically connected? The server is in another state.
The UCS Manager does seem to be aware of the server still, but the "overall state" shows as "inaccessible." Any help would be GREATLY appreciated.
Thank you,
Todd

I have never seen that! The server is marked as inaccessible cause you need to set it to factory defaults... attach the monitor and keyboard and try to move it back, but I am not sure that is possible (again, I have never seen this before)... you might need to remove the cables going to the fabric Interconnects and then reboot> F8 > Factory default and cable it again.
Let me know what you see... I am interested in confirming what other issue you may face now, hopefully none :)
-Kenny

Similar Messages

I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

Solving MSVCR80 issue and Windows iTunes install issues.

I downloaded the new update, and now cant open itunes

I recently downloaded the new itunes update, now cant open itunes, redownloaded atleast ten times, still cant open it all i get is an error message, reinstalled the itunes i had before the update, that wont open either, so i deleted itunes and went to redownload it, still cant open up itunes or download it

Hello there, thumerick.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have created two accounts for the same purpose and now I want to mix them without loosing anything. How do I do that?

Hi,
I have an Iphone and an Ipad with one email. There I have downloaded 3 ebooks.
Yesterday, I created an account at ID Adobe with another email. I have downloaded an ebook. I tried to downloading the other ebooks (I already have in the other devices), but was not able due to the a message related to license. I believe the different emails account is the reason. Please help me out. I thought that just my universities ID would be enough, but it is not.
How can I fix this problem without loosing any downloads?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

TS1702 i have purchaced many apps from the app store, and now after updating my phone to iOS 6, the apps sitting in my library in iTunes wont transfer to my phone anymore? Says that the apps can not be found. The appstore says i have no bought apps either

I have previously bout about 30-40 apps from the app store. After a recent update to the newest version of iOS (and a reset back to factory standards), i find that i cant put any of the apps from my iTunes library, back onto my phone!? When i try, it says that the apps location cant be found!? I tried going into the app store and in the app section going into 'Purchaces', in the hope that i could just re-install them from there (because i have already paid for them), but in there, it tells me that there are NO apps in my purchaces list!? This is quite concerning because i have spent quite a bit of money on these apps, that now seem to be un-usable?! Ican still put all my music on my phone through iTunes liuke normal, but Podcasts are doing the same thing as the apps?! Can someone please help me, or suggest what to do because im really getting frustrated. I really like my iPhone, but if this is what is going to keep happening, i think ill change to an Android phone. . . . .

Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya.

HT1688 I have updated my phone with the new ios7 and now my daughter nor myself can send or recieve text messages.

I updated mine and my daughters phones yesterday and now neither one of us can send or recieve text messages. HELP!!!

Hello Cookiebr7,
The following article details the available options for restoring access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

I have installed flash player 17.0.0.134 and now cant open any e-mail attachments. Can anyone help?

I have installed flash player version 17.0.0.134 for mac and now I cant open any e-mail attachments. I have been through the checks and it is installed correctly. Can anyone help? panda

I don't know how this works on a Mac; on Windows you need the Flash Player Projector (not the plugin) to view stand-alone SWF files: https://www.adobe.com/support/flashplayer/downloads.html

I changed the name of the hard drive and now cant find event

I changed the name of my drirve where I store my iMovie 09 (8.0.6) files. Now when I open iMovie the envets are missing.

Not missing, just that iMovie can't locate them.
Change the name back again.

Bought a new macbook pro, synced phone with the new computer and now cant get transferred music onto my phone

I recently bought a new macbook pro to replace my 2007 macbook. I transferred my music from the old macbook to the new macbook pro. Today i updated my iphone4 to ios5 (on the new macbook pro), and in doing so, deleted my library off of my phone. The problem is, when I try to put the music i previously transferred onto the new computer, to my iphone, it wont let me transfer anything. Any ideas why this might be happening?

The standard policy is 14 days return no questions asked.
The Original Poster got someone on the phone who knew how to "play" the system to get around that and squirt out a gift card "for customer satisfaction". The person you talked to was less familiar with how to play the system, so simply restated the standard company policy.
If you really did buy it 14 days ago today, take it all back to the store and politely insist that you get the gift card you feel are entitled to. Exactly how they process that transaction, and whether you leave with the same computer you brought in, is their problem.

HT5594 I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me?

I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me? is it possible for the thief to use or sell my I phone even it is on the locked mode by ICloud?

If it is turned on and your lock request is able to be fulfilled, a confirmation email will be sent to your Apple ID email address. There isn't any known way to bypass Activation Lock on your phone so no one will be able to use it. More information on Lost Mode: http://support.apple.com/kb/PH2700

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

I have garage band on my I pad and from what I can tell I have done everything right with the latest versions and icloud turned on for the app and phone. I have a cloud in the upper right corner of the song but when I go to my icloud drive on a brows

I have garage band on my I pad and from what I can tell I have done everything right with the latest updates and icloud enabled on the i pad and app. A cloud is in the upper right corner of the song but when I look on my icloud drive on a internet browser on my PC it is not there. Any reason why?

Bring your phone into Apple for evaluation

I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please help

I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.

thats the problem, its in MSDos (Fat) or NTFS for Windows.
Options.....
1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
2. get another HD, and format it for Mac OSX extended journaled.
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64) ------Can read/write from both PC and Mac
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Was updating my iPhone 4 to the latest ios and now stuck in recovery mode.

Was updating my iPhone 4 to the latest ios 5.1 (i believe) and a error message came up (didn't make a note of the error code sorry) but now phone is stuck in recovery mode with the USB wire and iTunes logo on. PC wont reconise iPhone when plug it in either. I had to delete an old back up before the update as i didn't have enough space on PC to do the update before but was told that during the update it backs up again anyway. I have looked in Device backup's and there is nothing there I have a feeling i'm going to have to restore it but hopefully there is another way as i wont be left with anything on the phone.
Any help please.
Many Thanks.

Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

I have enabled "standalone" mode in the CICM utility and now cant connect to KVM

Similar Messages

Maybe you are looking for