I have error 21 while restoring the system. Do you have a solution?

I can not resolve this problem, can you help me please?

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

Similar Messages

TS3694 i have show the error 1015 while restore the iPhone 3g

i have show the error 1015 while restore the iPhone 3g

The phone was jailbroken. You can't get help here. Discussing jailbroken phones is forbidden by the terms of service.

"An error occurred while creating the system proxy" after upgrade to 11.2

Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.

Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ?

I get an error message saying, "An error occurred while restoring the disk to a single partition." when I try to use Boot Camp Assistant to remove my Windows partition. Help?!

I'm trying to remove my Windows partition and delete Boot Camp altogether off my laptop. When I try to remove the partition, I get an error saying "An error occurred while restoring the disk to a single partition."
Can someone please help?

Boot from another hard drive or DVD and repair with Disk Utility.

I can't get music to transfer from cd to iTunes. Error occurred while converting the file. You do not have the privilege to make changes.

"Error occured while converting the file. You do not have the privilege to make changes. 27" iMac 2013 late model

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Error occurred while converting the file "". You do not have the privilege

I have recently bought a new MacBook Pro and it's my first mac ever. I have imported all my songs into itunes from an external hard drive where i would keep all my music and video's. I went ahead and added it to my mac and everything plays and works fine but whenever i try to import a cd i get this message Error occurred while converting the file "(Song Title)". You do not have the privilege to make changes." I tried changing the sharing and permission settings on the drive but it won't let me so i have no idea on what to do next. Any help is appreciated!

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I get an error message saying, "An error occurred while restoring the disk to a single partition." when I try to use Boot Camp Assistant to remove my Windows partition.

i don't know how to do

There is a forum for Boot Camp. This is not the forum for the notebook users.
You should always always have backup that you can use to restore your system incase of a problem.
Try booting into Lion Recoverey or from your OS X DVD and choose Disk Utility from Utility menu and repair the disk; try to remove with DU instead of BCA.

An error occured while restoring the iphone -50

i lost all messages and contact ***!!! please help

Check this support document for error explanations. http://support.apple.com/kb/TS3694. Look for the error number listed. -50 seems to have something to do with USB port issues, or anti-virus software.

Hi, my iPod touch has been unable to sync since downloading the new cloud software. It says: An error occurred while restoring this iPod (-34) So my music is not on it. it doesn't have 3G so the cloud is pointless anyway. Music is all I use on it.

Hi, my iPod touch has been unable to sync since downloading the new cloud software. It says: An error occurred while restoring this iPod (-34) So my music is not on it. The apps are still on it. It doesn't have 3G so the cloud is pointless anyway. It just said it was a software update, I should have avoided it. Music is all I use on it so help me please!

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

TS3694 i am getting system error no. 1015 while restoring the I phone

i am getting system error no. 1015 while restoring the I phone

Sounds like you're trying to downgrade the OS. tsk tsk tsk...
http://support.apple.com/kb/TS3694#error1015
Or it is probably jailbroken.

I have installed 0S5 but restoring the backup doesn't work. the following messages appear: An error accurred while restoring this iphone (-20) because the backup was corrupt or not compatible with iphone being restored (my iphone 3GS)

I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message: because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc

Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance.

"An error occurred while restoring from the backup.Files can't be restored"

My 4 month old MacBook Pro 15" running 10.6.2 lobotomized itself and I had to have a new HD put in it. I backed up the old one w/ TM on an external HD. I've tried (by the book, and with direct verbal guidance from the Help People at Apple) to restore the system and files but every time it gets to 10.2% in the restoration process and then I get this message: "An error occurred while restoring from the backup. Please restart." and under the frozen progress bar is the chilling line: "Files can't be restored." I've tried restoring from several dates on the TM backup list but it always stops at 10.2% completion. Help!

Hi.
Start by booting from your SL install disc, and selecting Utilities from the menubar, but before going on to +Restore System from Backups,+ instead select +Disk Utility.+
Make +*absolutely certain+* that your internal HD has the GUID *Partition Map Scheme* and the +Mac OS Extended (Journaled)+ Format (unless you're sure it should be +Mac OS Extended (Case-sensitive, journaled).+
Then do a +*Repair Disk+* (not permissions) on your Time Machine drive.
If that succeeds, quit Disk Utility, then continue with the full restore (per #14 in the FAQ).
But if that finds errors it can't fix, it's possible that +Disk Warrior+ can fix them. It's about $100, and is probably a good long-term investment, but there's no guarantee.
If all else fails, go back to Disk Utility and erase your internal HD, then install OSX. When your Mac restarts, use +Setup Assistant+ to transfer your users, apps, settings, and data from your backups (see #19 in the FAQ).
Then download and instal the "combo" update to get back to 10.6.2. Info and download available at: http://support.apple.com/kb/DL959 (or http://support.apple.com/kb/DL1017 for 10.6.3).
Be sure to do a +Repair Permissions+ via Disk Utility afterwards.

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

System Error 998 While loading the Labview Run-Time Engine

Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.

This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

I have error 21 while restoring the system. Do you have a solution?

Similar Messages

Maybe you are looking for