I have error 9808 what do i do
help me pelase
You're already being helped in your other thread. Please stick with that one and don't start a new thread.
Similar Messages
-
HT201210 I HAVE ERROR 1603 WHAT IS IT MEAN
I HAVE ERROR 1603 WHAT IS IT MEAN
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
TS3694 when im update i have Error 1015 what can i do ?
im try to restore my ifone but have error 1015 what can i do please help
This indicates an unauthorized modification of the iOS and cannot be discussed further on this forum.
-
HT201210 i hav error 1015 what can i do
i hav error 1015 what can ido
Hi there ebrahim123,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
-Griff W. -
I have error 2718 what I need to do
Hello
I have a problem with my softwear ( error 2718) I need help, what I need to do for fix this problem.
Thanks.We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee -
TS3694 I have error #6, what does this mean?
I got error #6 on my iphone 4, what does this mean?
This describes error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
I have error 3914 what is this
what is error3194
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
My iphone have error 1015,what can i do?i need help
i need help
Error 1015 is usually a downgrade error. Apple does not normally allow the downgrade of iPhone software. It is easily fixed. But generally the steps are not discussed on Apple Forums. Here is a good discussion of error 1015 from this Forum.
https://discussions.apple.com/message/15130733#15130733 -
I have an error 1015 what do i do
i have error 1015 what do i do
Type "1015" into the search bar at the top of this page by "Support"
-
Hello, I restored my ipod and now I can't restore my information back on my ipod. I read the manual on how to restore my ipod and I click the ipod under devices but, it won't let me get into the itune store. I keep getting error -9808. What can I do to resolve this problem? Thanks!
Have you seen this Apple support document?
http://support.apple.com/kb/TS2753
B-rock -
Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products -
I have a Macbook with OS 10.6.8 using Itunes 10.4.1 to sync my Iphone4. The itunes do not sync my contacts ... No error messages .... nothing ... just do not work ... However, It is working for apps, calendar and email. Does anybody have a clue what is going on ? tks
There is also an option to reset all data on the device with the next sync.
MJ -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
Should Airport Utility now be defunct for my time capsule because I have upgraded OS to Mountain Lion? I have tried every fix I can think of but AU will not set up. I'm also getting repeated time machine back up failures and now I have a new "sparsebundleinuse" error which is totally useless to me, I have no idea what a sparse bundle is, I have no idea what it's suddenly being used by and there's no information to say what to do about it. Apple is killing me here!!!
I've tried to but on the install for Airport Utility 6, after the download I get through the introduction then the license then I get "airport utility can't be installed on this disk. The version of Mac OS X on this volume is not supported" and that's it, no more options!?
-
I just got an ipod 4th gen from my friend and he said he hasnt used it in awhile and doesnt know the password. So i tried to restore it but i keep getting an error 3194 message and i have no idea what to do. Please Help me!
Hi hachlerb21,
Welcome to the Support Communities!
The article below may be able to help you with this.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
I hope this information helps ....
Have a great day!
- Judy
Maybe you are looking for
-
Flash Player has screwed up my whole computer!
My computer was working fine until last night. When I opened a page it said you may need to download ActiveX something or other and gave me a link to download Flash Player 10. The problem is it will not download all the way, it just pauses. I also tr
-
Hi, In the Dealer Portal, Vehicle Sales Role --> Personalization. I am getting below Warning message. The Web Dynpro component assignment for business partner is missing. As per my investigation found below. Since address formats are different for ea
-
Has anyone used BBP_CT_UPD_SCHEMA_MAPPING succesfully?
Hello All, I was trying to programmatically load/update external category mappings using BADIs like BBP_CT_UPD_SCHEMA_MAPPING. Has anyone done this sucessfully? If so, can you provide sample code? Thanks in advance for any assitance. Regards, Dean.
-
I need help to setup my network on iMac 24, have a network drive installed already
Not sure even where to start. I have the Apple extreme router, WD network drive and 2 express units throughout the house. Looking to access the netwrk drive from MAcbook and TV that has internet connect through BLuRay disk. Router is behaving ok and
-
I'm using the SHOW_VIEW command to display some stacked canvases on a window. They are for information only so have no input fields. What I am finding is that a canvas appears if I issue SHOW_VIEW from a checkbox trigger but when I issue it from a bu