I have error to create database connection

'Conn_SQLite.exe' (CoreCLR: DefaultDomain): Loaded 'C:\windows\system32\mscorlib.ni.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\Data\SharedData\PhoneTools\AppxLayouts\2099df85-4c1b-4307-9c1a-4ecb7d30cc63VS.Debug_x86.User\Conn_SQLite.exe'. Symbols loaded.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\WinMetadata\Windows.winmd'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.INTEROPSERVICES.WINDOWSRUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.DIAGNOSTICS.DEBUG.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.COLLECTIONS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.THREADING.TASKS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\System.Runtime.WindowsRuntime.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.EXTENSIONS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'Conn_SQLite.exe' (CoreCLR: .): Loaded 'C:\windows\system32\en-US\mscorlib.debug.resources.dll'. Module was built without symbols.
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.ni.dll
Error : System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Conn_SQLite.Student.<create_Connection>d__0.MoveNext()

Hi,
Maybe your connecting directly after the listener starts, wait a while then try to connect again, if this problem still occurs, check the SID of your Connection settings, it maybe incorrect.
Regards,
Ahmad Esbita

Similar Messages

Error during create database connection (JDeveloper)

Hello!
Have you any suggestions of this: When I try to create new database connection to 9i DBMS, I've got errors:
ORA-00604: error with recursive SQL
ORA-12705: Invalid or unknown NLS parameter value specified.
At the same time I try to do the same with another one DBMS,
10g, and everything is Ok.
Thanks.
Andrew.

Stephen, sure, I did all actions you described, during "Create new Database Connection":
(filling in driver (thin), host name (i.e. localhost), jdbc port (i.e. 1521), and sid (i.e. orcl) )
Th result I think should be looks like
jdbc:oracle:thin:@wizard.shots.ru:1522:VIVD
(tns for that DBMS is
VIVD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wizard.shots.ru)(PORT = 1522))
(CONNECT_DATA = (SID = VIVD))
As I wrote, the same actions give OK result, if dbms = 10g.
But, I want to test OEBS adapter, and OEBS stands on 9i DBMS only,
so I need to work with 9i
Thanks.
Andrew.

SBO0001 error DBD:ORA12154 error while creating new connection

Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
Mike

Mike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark

Error in odbc database connection

Hi All,
I have created database connection from SAP system to another no sap system (Radar) using the tcode DBCO and maintained the following parameters
DB connection: RADAR_DEV
DBMS            : MSS
user Name : RADAR_DVLP
Db password : **********
conn info : msql_server=hostname of SQL server msql_dbname=DB name object_source=DB name
It is gives a below short dump when this db connection (DB connection name) is used in a program by ABAPer
error message
                                                                                The error occurred in the current database connection "RADAR_DEV".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_NATIVE_SQL_ERROR', was not
caught, which
led to a runtime error. The reason for this exception is:
How to correct the error
Database error text........: "Line 1: Incorrect syntax near '.'."
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"ZRADAR_EXTRACT" or "ZRADAR_EXTRACT"
"START-OF-SELECTION"
Can you please help me on resolving this issue
Thanks,
Vadi

Hello Vadivambal,
Could you please provide the syntax of line, on which the dump occurs.
Is user RADAR_DVLP able to fetch same data without an ABAP program?
Regards,
Ammey Kesarkar

Oracle10g Import:ORA-01119: error in creating database

I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
This is the import command i'm trying:
imp db/db@sid file=file.dmp ignore=y full=y
But it still posts the following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by OPS$QZORA, not by you
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
"bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
"qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
" , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
"bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
"1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
"E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
"mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
"00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
"' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
"EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/home/NEW01.dbf'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
IMP-00000: Import terminated unsuccessfully

Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
thanks in advance
shiva

Error when creating database

when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?

Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null

Workspace Error 8001: The Database Connection could not be found

We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
I can see all the existing reports but cannot use any of them as I dont have any connections.
Also I cannot create any new connections
I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
Not sure what the problem is.
Any suggestions?

Hi Pat,
It loks like your Biplus relational DB is corrupted, try with those steps:
1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
2. Configure against the backup database (Drop and recreate tables option).
3. Re-register BI+ with Shared Services.
4. Re-deploy BI+.
5. Test Workspace and add new connections.
Regards.

Create database connection

I try to create database connection in jdeveloper.
I have error message;
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
10.41.119.12:1620:TEST
I did connect with database before. but I try to create connection with database today.
I cannot. what problem is it?
what am i goint to do?

Hi,
Maybe your connecting directly after the listener starts, wait a while then try to connect again, if this problem still occurs, check the SID of your Connection settings, it maybe incorrect.
Regards,
Ahmad Esbita

Error in creating database

hai i am installing sap netweaver 2004s with a IBM DB2 as database.I got an error in Create database phase.
INFO 2011-11-28 02:22:06
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.clp' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.2.clp'.
INFO 2011-11-28 02:22:06
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
INFO 2011-11-28 02:22:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
ERROR 2011-11-28 02:22:07
MDB-01016 SQL0294N The container is already in use. SQLSTATE=42730
ERROR 2011-11-28 02:22:07
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDb|ind|ind|ind|ind|16|0|CreateDatabase was executed with status ERROR
Please help me in solving this problem.....
Thanks in advance......
Dinesh.

Hello,
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR.
This Error occurs because the <SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X> and <SID>LOG1,<SID>DATA<x> are already containing the .mdf,.ndf and .ldf files.
So rename those directories to someother(Do not delete, just rename, as it might be used to attach the database incase you have detached it) and just create the above directories "<SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X> and <SID>LOG1,<SID>DATA<x>".
This should solve the problem.
Any questions, do post it back, will try to resolve it.
Many Thanks.

Error while creating OLAP connection in IDT

Hi friends,
I am facing error while creating OLAP connection in IDT (BO 4.1 sp2)
I am using sql server 2012.In the screen shots you can observe server name and user name of the Sql server
I am creating OLAP connection to connect CUBE
Check the screen shots for the error
Plz help me
Here you can see the server name and user name
While creating OLAP connection I gave these credentials
This is the error I am getting

Hi..
To create connection and access the BW data, developer must have the password. and while create connection using Authentication Mode: Single Sign On, need to loin the username has pattern <SID~client/SAP userid>,
User Name: SID~client/SAP userid
Password for the SID,
Authentication as SAP.
Plese find the below link for more info: http://scn.sap.com/community/semantic-layer/blog/2014/06/19/pre-requisite-authorizations-in-sap-bw-side-before-develop-the-universe

ORA-01119: error in creating database file

Hi,
I am trying to run scripts adcrtbsp.sql but it is giving following error.
adcrtbsp.sql script contains:
CREATE TABLESPACE
APPS_TS_TX_DATA
DATAFILE '?/dbf/transaction_table.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_2.dbf'
SIZE 1000 M;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_3.dbf'
SIZE 1000 M;
CREATE TABLESPACE
APPS_TS_TX_IDX
DATAFILE '?/dbf/transaction_index.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_IDX
add DATAFILE
'?/dbf/transaction_index_2.dbf'
SIZE 1000 M;
sqlplus system/pwd @adcrtbsp.sql
CREATE TABLESPACE
ERROR at line 1:
ORA-01119: error in creating database file 'f:/oracle/dbf/transaction_table.dbf'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Anybody can guide ??

Hi,
Let me explain..
You have started you session
sqlplus system/pwd @adcrtbsp.sql
Its trying to create here "'f:/oracle/dbf/transaction_table.dbf' "
Try to check the path with folder whether exists or not "/dbf"
Aman.. nice reply... !! I am late :-(
- Pavan Kumar N

Helpme I have error when I try connect from struts to web service

helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized

1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha

TP4: Can't create database connection

I have just installed JDeveloper TP4 and run it for the first time. When I try to create database connection, nothing happens. Specifically, I right click on "IDE Connections" and select "New Connection" - and nothing happens; no messages, no dialogs, nothing. Is there something I have to have installed before this will work? I have Sun's Java 6 installed - I noticed that JDeveloper warns about this. Would it cause this problem?

Hi,
can you try with JDK 5 to exlude and issue with JDK 6. It works for me with JDK 5 so, there might be an issue with you Java runtime
Frank

CAQuietExec: Error: Cannot create database.

Could not upgrade from Azure .NET SDK 2.2 to 2.3 (VS 2013) on Windows 8.1 x64. The Storage Emulator 3.0 setup is failing, even if launched manually. Do you have any tips?
The logs of the WindowsAzureStorageEmulator install has the following lines just before initiating a rollback.
MSI (s) (F4:D8) [08:18:27:340]: Source for file 'StartStorageEmulator.cmd' is compressed
InstallFiles: File: StartStorageEmulator.cmd, Directory: C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\, Size: 64
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CacheSizeFlush(,)
MSI (s) (F4:D8) [08:18:27:340]: Executing op: ActionStart(Name=RunInitialize,Description=Initializing the Storage Emulator,)
Action 8:18:27: RunInitialize. Initializing the Storage Emulator
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CustomActionSchedule(Action=RunInitialize,ActionType=1025,Source=BinaryData,Target=CAQuietExec,CustomActionData="C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\WAStorageEmulator.exe"
init -forcecreate -autodetect)
MSI (s) (F4:F8) [08:18:27:371]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIEAC9.tmp, Entrypoint: CAQuietExec
MSI (s) (F4:C8) [08:18:27:371]: Generating random cookie.
MSI (s) (F4:C8) [08:18:27:371]: Created Custom Action Server with PID 3640 (0xE38).
MSI (s) (F4:48) [08:18:27:387]: Running as a service.
MSI (s) (F4:48) [08:18:27:387]: Hello, I'm your 32bit Impersonated custom action server.
CAQuietExec: Windows Azure Storage Emulator 3.0.0.0 command line tool
CAQuietExec: Error: Cannot create database.
CAQuietExec: Error 0xfffffff3: Command line returned an error.
CAQuietExec: Error 0xfffffff3: CAQuietExec Failed
CustomAction RunInitialize returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 8:18:32: InstallFinalize. Return value 3.
MSI (s) (F4:D8) [08:18:32:276]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (F4:D8) [08:18:32:276]: User policy value 'DisableRollback' is 0

I agree. This (finally) took care of it! Thanks to DixQuinze and Trent Swanson...
sqllocaldb stop v11.0
sqllocaldb delete v11.0
delete C:\Users\MyAccount\WAStorageEmulatorDb30*.*
sqllocaldb create v11.0
Then try the install again!
-Dave
DixQuinze
0

Error on Create Database command for Oracle 9i on Red Hat 9

Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------

Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16

I have error to create database connection

Similar Messages

Maybe you are looking for