I have exported a file from premiere cs3 using quicktime animation codec, when i burn it the audio is not there..help!?

hello.
am having a proble with adobe premiere cs3
i have exported the file as quicktime using the animation codec, with 100per cent quality as it needs to be the highest quality
when i play the file with media player the sound is there, but when i burn it onto a dvd the audio is not there anymore... i really dont understand what i am doing wrong! can anyone help please?
i am using quicktine as im told this the best for optimum lossless quality
if i cannot burn it with audio using the quikctime animation codec, then i might try exporting it as an avi file. if so, what is the best codec to use for lossless quality?
thankyou!!!!

And when you follow Jim's suggestions, Export as elemental streams, i.e. one Video-only file and one Audio-only file. Encore will like that better.
Good luck,
Hunt

Similar Messages

TS2830 Transfer songs onto Music listfor nano, comes up with sync error 13019 still appears to have transferred to music list on nano while plugged in but when you search on the unplugged ipod not there.

When i transfer a song from my itunes library to ipod nano it says "cannot syn 13019" it appears to transfer song to the music list on ipod but when you disconnect from the computer the songs aren't on the ipod

No, I can't use a charger - I need to recharge the iPod off the computer. (I'm often charging it while traveling with no access to a wall plug).
What you describe in your situation is completely different from what I'm talking about: You have iTunes on and you are syncing the iPod, and then you eject it from within iTunes. What I'm talking about is NEVER having iTunes on, and just plugging the iPod into the USB port and just recharging it, nothing else.
My goal: I want to be able to plug in, recharge, and unplug the iPod without ever touching the mouse or the keyboard or interacting with the computer at all.
I 100% know this is possible because that is the setup I've had for months, and it worked fine. But when I recently updated to iPod software version 1.2, some setting was changed and I can't figure out what. I know it is very simple, the solution, but I've forgotten how I did it in the first place.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

I recently purchased a MacBook Pro, I did not transfer files from my old pc with migration assistant when I set up the MacBook. A few days later I did the transfer, now my Itunes library and everything else from my old pc is under a different user account

I've already setup the original user account and do not want to do it again, how do I merge the two user accounts into one so all of my stuff is under one user account?

They are the same Itunes account (mine), but since I transferred the 'user account' with my Itunes library and other files from old pc to my new MacBook, I now have two 'user accounts' on my MacBook. The original I setup when I got the MacBook and the one I transferred from my pc. I've already went thru most of my photos in Iphoto and named all the faces along with general setup of how I want all my settings on my MacBook under the first user account, I don't want to start over and do it all again with the transferred user account, I just want to move my Itunes library I transferred over to my original user account on my MacBook. Does this make any sense? lol

Best compression for exporting large files from iMovie for use in iDVD?

I have a doco that I've made as separate projects too slow to make it all in one project - which I then exported as Quicktime .mov files. When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed.
What would be the best compression to apply to the large .mov files but reduce the overall file sizes by say 10%
Its sometimes taking up to 6 hours to render each project average total screentime per project is about 70 minutes and each project file size ranges from 1 to 6GB...
I feel like I'm a little out of my depth on this one!
Any suggestions for this dilemma?
Thanks
Tony

When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed... Any suggestions for this dilemma?
Not sure if your 4.7GB reference is for the source files or the resulting "muxed" MPEG2/PCM encoded content. In any case a single layer DVD is limited to 4.7 GBs of total content. To be safe, this usually means you are limited to 4.2 to 4.3 GB of encoded movie and/or slideshow content depending on how many and what type of menus you are creating created. Thus, if you are encoding for a single-layer DVD and your project encoded content exceeds the capacity of your DVD, then this would likely explain your problem.
If your project size reference is for the source content being added to your iDVD project, then it is totally irrelevant and you need to concentrate on the total duration of your iDVD and the method of encoding instead of file size. Basically, for a single-layer DVD, only about 60 minutes content can be encoded using the "Best Performance" encode option, 90 minutes using the "High Quality" setting, or 2 hours in the "Professional Quality" encode mode. Thus, if your content duration exceeds the capacity of your encoding mode here, it would likely explain your problem.
In either case, the solution would be to either burn to higher capacity optical media/higher capacity encoding mode or burn your content to multiple DVDs as individual projects at the current media capacity/encoding mode.

Export .xlsx file from Webclient UI using abap2xlsx framework

Hello,
I have an urgent requirement to export the contents of internal tables to a .xlsx file using abap2xlsx framework.
Classes like CL_GUI_FRONTEND_SERVICES or FM's like GUI_DOWNLOAD doesn't work for Webclient UI.
Could anyone suggest me the proper stepwise solution with code snippet.
Regards,
Suyog

Hi Suyog,
Do you want to download the table view contents to a xls file right?? Is my understanding is correct?
IF it is then go to the .html page of your table view and there fill the attribute downloadToexcel.
Data: lv_excel type string.
Further clarification check the view BT115QIT_SLSQ/Items.
Regards,
Rajya lakshmi Ch.

Encore CS3 Is Stuck Importing As Timeline from Premiere CS3

I just purchased CS3 as an upgrade from CS2 and Exported to Encore from Premiere CS3. I've gotten to the screen that says Importing at Timeline and have been at 49% progress for over 30 minutes. The .m2V, .m2v.xmpses, .wav, and .xmp files were all created but I'm stuck here with the Import.
I'm running on a Windows XP SP2, 4 GB RAM, 2 Dual Core processors machine. I loved CS2. It worked great but there have been multiple problems with CS3.
Please help with Encore.
Thanks

This is aimed a Premiere Pro, but may help - First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the 15 questions at the end of that link... for question #1 you may use the FREE http://www.headbands.com/gspot/
Also, try exporting an AVI from Premiere, and see if that will import into Encore

Exporting PDF files from SSRS 2012 - "There was an error opening this document. The file is damaged and could not be repaired"

Good day
I have the situation where we are exporting PDF files from reporting services in our website.
When dividing the data into sections, the report exports perfectly, but when exporting the entire set and trying to open the file, we get the following error in Adobe Reader:
"There was an error opening this document. The file is damaged and could not be repaired"
We tried to repair the file, no luck. We tried to use different PDF readers, no luck
We then checked the file sizes. When exporting the subsections, each section exports a file of about 2mb.
When exporting the entire set, the file is about 1.3mb.
Adding all the sections together gives me a rough estimate of 40mb.
Exporting to TIFF works beautifully and returns a file of 41.5mb. Word and Excel formats also work well, only issue there is the page numbering and formatting.
The problem we have is the clients are adamant about having it in PDF format.
Any advice please?

This was one of the temporary suggestions I gave the client...
Unfortunately they do not like this as the page numbering and formatting in Word does not appear right. We are talking about over 1300 pages. I can't expect them to change the formatting with each export. Additionally, the data is
constantly changing and each client has their own data. The clients export the reports randomly. I therefore can't post the reports back onto the server.
Thanks for the speedy response though

I have read 118 files (from a directory) each with 2088 data and put them into a 2 D array with 2cols and 246384row, I want to have aeach file on a separate columns with 2088 rows

I have read 118 files from a directory using the list.vi. Each file has 2 cols with 2088rows. Now I have the data in a 2 D array with 2cols and 246384rows (118files * 2088rows). However I want to put each file in the same array but each file in separate columns. then I would have 236 columns (2cols for each of the 118 files) by 2088 rows. thank you very much in advance.

Hiya,
here's a couple of .vi's that might help out. I've taken a minimum manipulation approach by using replace array subset, and I'm not bothering to strip out the 1D array before inserting it. Instead I flip the array of filenames, and from this fill in the end 2-D array from the right, overwriting the column that will eventually become the "X" data values (same for each file) and appear on the right.
The second .vi is a sub.vi I posted elsewhere on the discussion group to get the number of lines in a file. If you're sure that you know the number of data points is always going to be 2088, then replace this sub vi with a constant to speed up the program. (by about 2 seconds!)
I've also updated the .vi to work as a sub.vi if you wa
nt it to, complete with error handling.
Hope this helps.
S.
// it takes almost no time to rate an answer
Attachments:
read_files_updated.vi ‏81 KB
Num_Lines_in_File.vi ‏62 KB

Gopro 2.7k export quicktime animation codec custom 22gb mov file?

Adobe support told me to export using quicktime <animation codec <custom 2704 x 1536 res for my gopro 2.7k and it turned into a 22.5 gb mov file. (not even 2 minutes long!!!!)
What do I do next? I mean I cant upload that to youtube. (well I could)
I'm new to adobe is there a better way to get my 2.7k res without it being 22.5gb or how do I convert it smaller and what would be the best for youtube.
I'm trying to get the best quality so I can view it later on my retina screen. Should I just upload it as is for best quality even if it takes a day lol? Thanks soooo much

Ya np I actually just check again, back in july 2010 youtube allowed various 4k formates then lowered in 2012 to 2048 x 1536 (I'm glad I just checked that)
So ya I've been researching youtubes uploader as much as I can and from different people have said large files get crushed so some have had better results converting it to a smaller size (not resolution) and uploading it for better results but now I have a 22gb 1 minute video and am wondering the best way to convert it smaller.
Also strange question but converting a 2.7k to 1080 will provide cleaner and crisper picuter but how would a 2.7k exported at 4k look. I would think it'd look grainy but what if you were viewing that on a 1080 screen?

Pulling files from a webserver using https

Hi Experts,
I have a scenario where i have to pull files from an webserver using https protocol to XI and pass it to a folder(no transformation required in the data).
Also please let me know in detail ,about the parameters of XI and the source webserver i need to have before starting the scenario.
Can this be acheived without soap?If Soap is the only solution please let me know how to proceed with it.
Thanks,
Sudhansu

its more on the SOAP implementation. SOAP supports attachments and hence they can send the file as part of the attachment
More - http://www.theserverside.com/tt/articles/article.tss?l=SendingAttachmentsWithSOAP
Once that is implemented, you can use the option keep attachments in the soap adapter to receive the attachment.

Only seeing Audio File in AME on Import or Export to Queue from Premiere

Hello All...
I don't have alot of experience with AME... I"ve exported a sequence from Premiere Pro, Selected setting and added to the Queue in AME... all I see show up once the AME window opens is an Audio File.
When I open a Premiere project directly from AME (using the dropdown menu) I get the same result... I've tried this with a few Premiere Projects. Am I missing a step here???
Also... I'm confused as to why I select all the transcode settings in Premiere Pro when exporting media... and then there are presets again in AME... don't the settings carry over from Premiere's export window?
Thyanks for any help...

I'm wrestling with this same issue.
I'm on Windows 7using Adobe Premiere Pro CS6.
I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments as needed so everything would fit on the discs.
The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem.
But now, two things happen:
1) AME automatically designates the "Output File" with an .aac extension
2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
Whassup?
Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
Format: MPEG2-DVD
Preset: NTSC Widescreen High Quality
Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
BOTH the "Export Video" and "Export Audio" boxes are checked
Filters Tab: left as is, don't do anything here
Multiplexer Tab:
choose the "DVD" button (vs the "None" button)
Bitrate Type: left as Variable which is what is selected as a default
Video Tab:
Codec: Reads MainConcept MPEG Video
Quality: increase it to the max of 5
TV Standard: NTSC
Frame Rate: 29.97
Field Order: None (Progressive)
Pixel Aspect Ration: Widescreen 16:9
Render at Maximum Depth box checked
Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
Audio Tab:
Audio Format: Dolby Digital
Codec: Dolby Digital
Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
I check the "Use Maximum Render Quality" box
I chose "Queue" for everything and then let it run overnight
So... what am I doing wrong, helpful experts????

Export video clip from Premiere into an existing Encore project

New to encore.....love the software so far....but not much experience with it yet. Here is my question:
How do I go about exporting a video clip from premiere CS3 into an open/existing encore project. When I try to export to encore from the prem. timeline it makes a new proj. Sometimes I want to render out and export more than one asset into the same encore proj. but cant seem to figure out how to do that. any help would be great.
Thanks,
Eric

thanks J.....I have been doing it all along the way that you suggested. Just wondered if there might be a more efficient way to bring in multiple files. I appreciate your help with this....now at least I know that I am not doing things in a more difficult manner than necessary.
Thanks again!
~Eric

How do i edit a V21O file in premiere cs3?

hello. i really need some help! been searching on the net but to no avail.
I have been sent a couple of dvds from a company with V210 files on them. they are pretty big vido files, around 6gb
i need to edit the files in premiere cs3.
i have tried opening them up into premiere but it just play the audio, the video is just a white screen
i have also tried converting the file to avi with file conversion software but no luck, opening it up in Aftereffect also, but still just the white video
i really don't know what to do, i have a deadline for tomorrow. can anyone help please???
thankyou thankyou!!

Welcome to the forums.
The following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
Cheers
Eddie

Major problem: I can not export NEF files from Lightroom

This is just plain weird: I can't export NEF files from Lightroom 2. I can export any other file format, but not NEF. With Lightroom 1 this was no problem.
It makes no difference whether I choose the export command with my mouse, via the menu or with a key stroke - nothing happens.
Lightroom version 2.0
Camera Raw version 4.5.0.175
Camera Nikon D3
Photoshop CS3 version 10.0.1
MacOsX version 10.5.4
I've called Adobe, and they simply don't know. I have reinstalled Lightroom 2 with no succes. Restarting, repairing permissions, nothing helps.
Any ideas will be greatly appreciated.
Marsel

Marsel, your language is confusing, First, you cannot 'export' NEFs to PS. You can send a copy there from within LR as a tif or psd.
Exporting per se takes place through the Library module under the Export function. When Nef's are exported by choosing 'original' in the export dialogue, the file is the 'original' NEF accompanied by an XMP. That Nef, if opened directly in PS from your file system should appear in the Camera Raw window, where you can make whatever new edits on it you want or change the original adjustments you made in LR. Then, once you open that file in PS from the Camera Raw window, any further work you do will be pixel editing. That work can then be saved in a number of formats, but not as a NEF.
Transferring files to PS from LR for editing is another matter. That sends a copy of the original NEF, including LR adjustments to PS as either a Tiff or a PSD (your choice via the dropdown). After you have edited that Tiff or PSD in PS and hit save, it will send a copy back to LR as a Tiff or PSD, which will appear next to the original nef.
These procedures work perfectly on both my windows 32 and 64 bit machines with LR2 and 2.1. with all my NEFs from several camera models.
When you say 'export' do you really mean sending a copy to PS or do you mean 'Export' as LR defines that term?

I have exported a file from premiere cs3 using quicktime animation codec, when i burn it the audio is not there..help!?

Similar Messages

Maybe you are looking for