I have external sound but no internal sound

When I receive or make a phone call I have no sound on the other side, unless I turn my speaker on. I have external sound but no internal sound

iPhone: Hardware troubleshooting

Similar Messages

  • I want to install yosemite via external hd but my internal hd is not showing in the utilise disk

    please help i think I'm stuck
    Have been trying every way i know and found on internet to install os x yosemite on my macbook pro 2.4GHz the final method i tried is to install via external hd since my new hdd don't have recovery on it i boot in successfully with the external hdd but my internal hdd is not showing up so i can not install on it. pleas help.

    It would be helpful if you indicated the EXACT model/year MBP that you have and the current OSX>
    What is preventing you from installing Yosemite directly to the internal HDD?
    Ciao.

  • Can't see group wiki from external network, but can internal

    when someone goes to my site, and clicks on groups, you see the list of groups. but then you click on it, and it says "group doesn't exist on the server". but it does! it works fine on my internal network. what gives?
    the site is http://tmac.podzone.net
    and no, that's not my internal domain
    Message was edited by: twood3

    Hi,
    This works when I tried it from an external route. Hopefully you want to leave your site open to everyone, because that's the way it is now.
    If you can't get to it internally, then add an A record to your site with external IP address under your current zone.
    HTH,
    Harry

  • HDD dead no back up or disc drive, have external HDD but can't back up?

    Hello,
    Computer in question is mac book pro late 2008.
    So I've been looking since 10 this morning to sort this out and i just can't seem to find a way round this??
    I have had the disk utility on trying new image and can't get that to work. Ive been running easeUS data recovery wizard but i think it will only let me move 2GB over before i have to pay. I feel as if there is a free way out there to get this done I've just not found it yet.
    Im running yosemite from my HDD now as i can't get my other one to work. I have use to another mac book pro but its not mine.
    Many Thanks!

    If the HDD in question is inoperative but data recovery software will allow you to salvage some/all of the data, you Will have to pay if you want that data.  I know of no free software for data recovery.  Backups eliminate that problem.
    Have you tried Target disk mode?
    http://support.apple.com/en-us/HT1661
    This will not help if the HDD data cannot be accessed.
    Ciao.

  • How to load LR 5 on 13"mac book pro,don't have external drive but have my old mac book pro 15"?

    I tried to transfer lightroom 5 from one of my macs to the other via wifi, but seeing as that would've taken ages (324 hours to be exact) I nixed that idea. Do you guys have any suggestions on how to install lightroom 5 on my mac 13'', which does not have a cd drive?

    Leuvy13 wrote:
    Cheers,
    I'm not gonna lie, I actually have no idea if its pop or imap. Do you know where you can check and if it can be changed?
    Hotmail on a Mac is POP3 only, you will only get the basic folders (inbox, sent, trash etc) and it will not sync with other devices.
    And now I post this I see other replies, so this is redundant. !!

  • SMTP relay works for external recipient but not for internal recipient

    Relay allowing external recipients but not internal recipients. Running Exchange 2010.

    Whats the error you gotten for the NDR
    Blog: http://theinfraguys.com
    Follow me at Facebook
    The Infra Guys Facebook Page
    Please remember to click Mark as Answer on the answer if it helps you in anyway

  • Sound from external speakers, but not from internal speakers

    I tried searching as much as I could and couldn't find an answer....
    I always use my function keys to turn my volume up and down. It has worked fine until today, then all of a sudden, my internal speakers wont turn up or down when I use my function keys. The volume window comes up and below the volume level bar there is a circle with a line through it (like no smoking sign, but without the cigarette)which I guess leaves my internal speakers on mute.
    So i came home, and plug in my logitech speakers, and I can control the volume fine from my function keys. Then I disconnect my logitech speakers from my computer and I get the same problem with my internal speakers.
    I probably confused everyone but I guess a short version is my function keys wont turn on my internal speakers, and when I have external speakers plugged in, everything is normal.
    Please help.
    Thanks,
    Brendan
    Black 13" Macbook 2ghz Core 2 Duo 2GB   Mac OS X (10.4.8)  

    If you look in the headphone jack, can you see a glowing red light? This happened to many people, it was an issue where a switch got tripped to make the computer to think that a pair of headphones or external speakers were plugged in. Try inserting a toothpick inside the headphone jack and gently probing around in there to try and turn off the switch.
    See here.
    And by the way, you don't need to bump topics that are only three hours old.
    Message was edited by: aqua*star

  • Guys ... I have a 2008 MacPro running the current Yosemite.  I also have installed the sound amp called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

    Hi Folks ...
    I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up automatically to BOOM!  and thus to the external speakers.  Instead, it boots up to the Internal speaker.  According to the folks at "BOOM!", this is happening to others who have similar Macs.  They can't find any explanation within BOOM!, so I am turning to you all.  Any ideas?

    Hi Kappy ...
    Sorry, I guess I didn't state the problem very well.
    I don't want the computer to boot up to the internal speaker.  I want it to boot up to the external speakers.  However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker.  So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out.  From that point on, everything is OK until the next boot up.  It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker.  How do I change that behavior and get it to go to Line Out whenever it boots up? 

  • Bounced songs appear to have proper format but have no sound

    What am I doing wrong? Is all I have to do to bounce a song - file/bounce? So far none of my bounces have any sound. They all appear to play normally but we can't hear anything. Does any one have any ideas?

    Hi,
    What is the MIDI sequence triggering??? The Roland synth? Are you playing back the synth and Logic thru a mixer?
    If this is the case you NEED to bring the Roland's audio outputs into Logic. You can do this in two ways:
    1. An Input object.
    2. An Audio track.
    In either case, you need to hook up the outputs of the Roland to two available inputs on your sound card, and enable those inputs in Logic, on an audio track (if you want to record the audio), or an input object,(if you do not want to record the Roland's audio output).
    If you are using INTERNAL synths...then you need to check your output routing. Are you routing ALL audio through output 1+2??? And then when you bounce, you chose output 1+2 as the bounce source in the bounce dialogue???
    What sound card / converter are you using???
    Cheers

  • HP Pavilion dv6775-Vista-Internal sound not working-External sound is OK

    Hi All,
    I searched through this forum and just realised that I am not the only person with this problem. Sometime back the sound of my laptop (dv6775us) stopped working. However the external sound systems work fine when connected. I have done whatever was mentioned on HP support site/Microsoft site etc. i.e checked the device driver, reinstalled etc. While running the diagnostic everything seems normal. Anybody has any clues, please help.
     Thanks in advance.

    Hi I just fixed the same problem I found that the sound card was enabled but the speakers were disabled.
    go to control panel  sound playback then right click in the window and check show disabled items. It was here that my speakers were disabled. hope this helps you.

  • My iPod is playing internal and external sound at the same time when my headphones are connected

    Hi, I have an iPod nano, 16 GB, 5th gen, that I've had for almost five years. It has never given me any problems before, but today when I plugged in my headphones the sound played not only inside the headphones but through the iPod's external speaker. When I turn the volume up or down only the external sound goes up or down, the headphones still play music at the same volume. I tried connecting the iPod to other headphones, and inserted and removed the headphone jack from the iPod about 20 times, the only thing I haven't tried is restoring because I don't know if that would make any difference and I would like to avoid restoring if I can. Thank you for your time.

    Thank you for the suggestion, but it didn't work.

  • AUDIO QUESTION: Running external sound card plus internal sound a once

    Hello,
    I have a question about the possibility of operating an external sound card (Line 6 tone port UX1) and operating internal audio at the same time. In system preferences, it just lets me have one or the other.
    Is there a workaround or program that would allow me to do this.
    It is necessary because I need a cueing output and a master output for djing with my m-audio xsession pro.
    Any suggestions would be great.
    Thanks,
    Lynx

    model external sound kard is e-mu 0404. it is unkhnown for may hp laptab

  • After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

    After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • TS3212 something is wrong with my itunes, none of my 4 ipod devices show up when i try to connect them to itunes. but they do light up and show that they are charging, and two have lost sound...

    ok, so two of my devices have lost sound the first was about 2 years ago, but i kept the device because i could still use it for other things, then i got a " new to me" ipod about 6 months ago, and it too has, within the last two days, lost sound, and while trouble shooting these issues i have been trying to restart/refresh/whatever one of them and now none of the 4 devices that i have is shouing up on my itunes!!! this is verry upsetting since the others didnt have any problems, and i really dont want to pay $ for a fix. do not have the money for that, nor do i expect this kind of thing to happen to me more thann once.
    i have gone through all the diagnostic tests with my computer and each ipod multiple times, even trying to reverse the order in which i perform the steps, as a last resort, making no progress. i have downloaded new versions of itunes 5 times within the last 3 hours and restarted my computer 7 times. my devices do not show up in "my computer" but they do display as charging when i plug them into the usb port, and to wrap up i have tried using all 3 usb ports on my computer to do this.
    please do not post that i should restart my computer or that i need to restart my device! please do not tell me to go to an apple store or buy a new device! but all other help/ ideas will be greatly appriciated.
    thank you

    Clean the dock connectors.
    Try different sync cables.

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

Maybe you are looking for