I have FF Mobile loaded on my Transformer Prime with ICS. I have read through all the tutorials about installing addons but my FF does not have a slide out menu on the right side. So I cannot click on the gear button to open the settings.

I believe this started after the update from 3/13. I remember setting the user agent at some point when i first loaded it. Now I am unable to get to that option.

Update: I have also loaded FF Beta and Aurora and I have the same problem. No way to open the settings menu.

Similar Messages

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

Are you using a supported carrier? Do you have a plan that permits text messaging?
The iPhone uses a 'silent' SMS message exchange with Apple's servers in the UK to activate. If you are not using a supported carrier, and/or your account is not provisioned properly for an iPhone, the activation may not be able to complete.

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

I recently subscribed to the editing my pdfs but this option does not come up under tools menu

I recently subscribed to editing my pdfs but this option does not come up under the tools menu - only convert, create, export, etc.

Thanks for your response – But I went online chat with a customer service rep and my problem has been resolved.
Thanks again.
Gary

IChat AV 4.0 issues, Error 8 - read through all the threads...Help needed

SO searched all the threads on Error 8 - in the past my friends and I have always either found the answer or updated the SW and video chat has worked.
I am out in California using T-Mobile account at StarBucks (and other free WIFI locations) I can connect and video Chat with my home with iMac using iChat last (version) update in Tiger. Apple Extreme wireless. I have also been able to connect with Buddy 2 when at home.
Problem ( 1) I cannot connect buddy 1 (with the linksys) directly from my connection.
(Interesting side note: Home connects with Buddy 1, then in that connection I was added to the Video Chat and this worked.)
Note: (2) I cannot connect to Buddy 2 (also with a linksys) directly from my connection.
Note: (3) Buddy 1 can connect to Buddy 2
Note: (4) Buddy 2 travels to Buddy (3) home (also with a linksys) and they connect and add Buddy 1
Problem (5) they try to add me (at T-mobile StarBucks) and cannot connect.
We have systematically tried:
1) QT set to 1.5 - iChat bandwidth set to None
2) tried different ports ( 443) in iChat Prefs,
3) Opened ports on the linksys routers
4) Checked Sys prefs firewall (allow all incoming connections checked)
What should we be looking for?

Do they have Linksys devices that have a Security Page ?
If so have they set it to "Respond to Anonymous Pings" ? as iChat sends a Ping.
I would also go for the UPnP option
10:09 PM Monday; February 4, 2008

Will not open up with the home page I have specifed on navigator toolbar I have gone through all the settings but it reverts to another home page when I restart the PC

I want my page to open up with google which it has until lately when I downloaded jzip and since then it always opens up with http://search.jzip.com/ instead of http://www.google.com.au/ When it comes up with jzip I change it to google and request it to be my home page and it stays that way till I restart the pc and it reverts back to izip and I have to go through the same process to change back to google, it never used to do this at times when I have down loaded information it has changed but I have always been able to revert to the correct home page and it stay that way but not any more.
The jzip is in the navigator toolbar section as are other websites but this is the only one that keeps being used as the home page hope you can find a solution as it is very annoying.

You can open the about:config page via the location bar and do a search for jzip via the Filter at the top of the about:config page. 
You can reset all jzip related prefs via the right-click context menu to their default values.

I can't get my iPhone 4 to get Siri on I went through all the settings and still no Siri. Please help!!!

I can't get my Siri to work I have looked on settings and I can't find it. I really want Siri on my phone please help!!!

Please check these steps.
1. Allow Siri in Restrictions
Go to "Settings > General > Restrictions"
If you enabled restrictions already, please allow Siri in the list.
Then you can see the Siri in the 3rd of General menu.

TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem. I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
Thanks

What email program are you using? And what do you mean by "Safari mail"?

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone

I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please help

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

Janieburmy,
You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
So, let's try the filter experiment.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

Try perform below steps.
Open task manager by pressing Ctrl + Shift + Esc keys. Click on more details if the option available.
Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
Then hold windows key on your keyboard and Press R key.
It will open Run window
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Then navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Go back to Program Files (x86) and Open Adobe folder
Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
Download and install Creative Cloud App from below link
https://creative.adobe.com/products/download/creative-cloud
Then check

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

I have FF Mobile loaded on my Transformer Prime with ICS. I have read through all the tutorials about installing addons but my FF does not have a slide out menu on the right side. So I cannot click on the gear button to open the settings.

Similar Messages

Maybe you are looking for