I have Final Cut 4.5 - Where's DVD Pro?

I was told DVD Pro comes with Final Cut. My 4.5 I just installed doesn't have it at all. Does anyone know how I can get this software? It seems not to be sold separately anywhere, even on eBay.

DVD Studio Pro (DVDSP) comes with Final Cut Studio. If you only bought FCP, then you won't have DVDSP. You can buy it separately, or you can upgrade to Final Cut Studio and get it with studio along with some other cool apps.
http://www.apple.com/universal/crossgrade/
What is so mindblowing is if you have FCP4.5 you can upgrade to Final Cut Studio for $200! That is a crazy deal! Final Cut Studio comes with:
FCP
DVDSP
Motion
Soundtrack
Compressor
LiveType

Similar Messages

  • I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

    i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

    EExactly what settings are you using. Some go to iTunes.

  • I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?

    I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?  Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

    You have to choose – one settigf or another.
    The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
    WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
    Good luck.
    Russ

  • Where Motion 5 work even if I do not have Final Cut X?

    I do not have Final Cut Pro or FCP X. If I buy Motion 5 can I still install and work with it?

    It' heavy on memory so that is important, but it works independant and you won't regret it. Not easy in the beginning but don't give up, worth every cent.
    Good luck.

  • I have Final cut Pro HD sequence and I need to burn this on a DVD

    I have Final cut Pro HD sequence and I need to burn this on a DVD, my sequence lasts 1 hr and 33 minutes. What are my options? Is it better to export as a Quick Time movie or using the compressor? I'm new to the compressor just learning, please help.

    Select your sequence in the browser window, go to the File menu and choose Export Using Compressor.
    When compressor opens, choose the DVD best quality settings, 120 minutes.
    For audio and video both, choose both the m2v video and the AC3 audio. (Dolby Professional)
    Choose a destination for your files, and hit submit.
    When it's finished, import these files into your DVD SP project, and make your DVD.
    Be sure to choose the 16:9 anamorphic settings.

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • Do I need to have Final Cut to run Motion?

    Hello guys,
    I understand that I can purchase Motion 5 (and Compressor 4) as stand alone applications, but I was wondering:
    Do I need to have Final Cut installed in order to run it?
    Just use it to create animated graphics, then export it as a self contained file and use it in any editing program.
    And I was also wondering if Motion 5 would run OK on a new iMac (27 inch one with NVIDIA GE FORCE GTX 775 card).
    Thank you so much for your feedback,
    Paul

    You do not need to have Final Cut installed to run Motion or Compressor.  Each app can run as a stand-alone. Some functionality is enhanced when running them in combination. Motion will run just fine on any current hardware.  You can always check the system requirments to know if the applications will run on a particular computer.
    http://www.apple.com/lae/finalcutpro/specs/
    http://www.apple.com/lae/finalcutpro/motion/specs/
    http://www.apple.com/lae/finalcutpro/compressor/specs/

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • I have final cut pro 5 and it keeps asking for my serial every time i open it again. What can I do?

    Everytime I open up Final Cut Pro I have to enter my name and my serial. It's annoying to have to do every try. Does anyone know what's wrong or what I can do?
    I have final cut pro 6(the one that came with final cut studio 2)

    Have you recently updated anything or re installed FCP.
    DM

  • Do I need to have final cut pro to use motion?

    Do i Have to have final cut to use motion or can i use imovie?

    You don't need Final Cut to use Motion but you can't create transitions/effects for iMovie either. You can use Motion to create to composite effects on/with video clips and export the finished work as clips for use in iMovie. So in that respect, you can use iMovie. Motion should make most of the work convenient. You'll need to make sure that the clips you import and the project length are the same (or shorter if you intend to trim the clip in Motion). For transitions, titles, and effects, you can drag clips into the provided "drop zones" for the project type (if you were using FCPX, you would generally leave these "empty" as those drop zones are filled automatically by what exists in the fcpx timeline.)
    You'll have to adapt your workflow modestly, but I think you'll find that Motion will be a big help to you. I know people who edit entire (short) videos in Motion. It's an outstanding deal (just expect a bit of a learning curve - but there's a lot of free tutorial material around on the net.)  I personally don't recommend that you use Motion to edit video in exclusively, it isn't designed for that (and typically will not play video with a lot of special effects at full speed...) It is a video *compositing* application; more like a "photoshop" for video.
    HTH

  • I have final cut pro x, how can i copy my project to dvd

    i have final cut pro x on my i mac, i creat a video project and would like to copy to dvd. how can i do that. thanks haidar

    DVD should show as an option (destination) in the menu associated with Share.  To actually go to a DVD, there has to be a DVD burner connected to the Mac.
    Ernie

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

  • Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

    Hey,
    I have Final Cut Express 4.0.1 and a JVC everio camera.
    Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
    please help !

    FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
    If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
    What is your camera's exact model name and number?

  • How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?

    I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed. Thanks in advance!

    How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?
    If you can view a ProRes 4-2-2 video at all, then you either have the independent ProRes422 Playback component installed or the FCP "Pro" video components installed.
    I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed.
    Check your "~/Library/QuickTime" folder for your various "Pro" components. If in doubt that you have them all, re-run the FCP installer and it should add any missing components, apps, or utilities.

  • Do I need Final Cut Pro HD when I have Final Cut Studio?

    I will be starting my second project on my new mac and using final cut pro. It will be an instructional DVD. This is my first posting and I guess my first attempt at reaching out (baby steps).
    I will be borrowing an HD camera (some consumer grade). My Question is do I need Final Cut HD when I have Final Cut Studio installed. I notice Final Cut Pro 5.1.4 has HD import and export settings.
    Also, since I have mentioned my project is there any quick reference ideas for a learn to play an instrument DVD, CD or anything.
    And lastly as I wonder off my thread a little. Is this Discussion forum my quickest way of getting an answer, I mean is there anyone who will let me bug them from time to time?
    Thanks
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1   Mac OS X (10.4.9)   2X2 GHz Dual-Core Intel Xeon 1 GB Ram

    I will be borrowing an HD camera (some consumer grade).
    Forgot to welcome you to the forum... Welcome.
    Before you jump into this project you may want to do some research. The format you are talking about is HDV, highly compressed and some would say difficult to edit with. A search here on HDV will give you plenty to read and probably point you to some interesting articles.
    Might also consider why you want to shoot HD at all right now since you will most likely be going to Standard Def for distribution.
    You'll find that if you just check in and browse the topics every day or so you'll pick up lots of good information (and probably a few laughs)
    If you're looking for examples for this type of project, just hop down to your local music store. Most have "How To" DVD's for sale.
    Good Luck
    rh

Maybe you are looking for

  • Link between GTM and FSCM (sales or purchase order hedging)

    Hi all, I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchas

  • Playing FLV within dataset

    Hi All, I am hving trouble with a html dataset. I am trying to play an flv file from the dataset. It plays in Firefox perfectly but doesn't play in IE. Ay ideas. Here is the page: http://www.incadesigns.com.au/ezy/products_round.html?row=3 Cheers, Da

  • Change sequence of condition types in PO

    Hi, After creating PO , various condition types are populated in the in the condition tab at item level. Now i need to change the order in which these condition types are occuring in that PO . Please suggest me how could i change it. After clicking o

  • Sh policy-map LLQ counters showing strange results.

    I've config'd LLQ for video conferencing across a dual-T1 multilink connection. When I have a video conf. session going, the Class-map counters for 'packets', 'match' and 'pkts matched' under queueing being exactly the same. This is supposed to show

  • Weird line in input fields & buttons...

    Input fields & buttons on several sites look like this in Safari (notice the line): Disabled all plugins, but the problem remains. Anyone know what causes this?