I Have FireFox 12.0 on Windows 7 ...I notice that closing tabs takes 3 or 4 seconds to close..Any help ?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

You should probably just download the trial version of pse 12 and see if you can live with it.
Download a free trial or buy Adobe products | Adobe downloads
That being said, have you tried to install pse 1 on your computer?
How much free space is on your hard drive?
Do you have Internet Explorer 10 or 11?
Pse 1 can run on windows 7 x64, provided certain conditions are met.

Can't open "special characters" in any Edit menu; have a constantly flashing empty window labelled 'characters' that i can't stop. window flashes then disappears every time i click on anything. any suggestions? tru thanx !

i can't open "special characters" in any Edit pull down menu. i have a constantly flashing empty window labelled 'characters' that i haven't been able to stop.
it appears every time i click on anything. any suggestions? tru thanx

I, too, have found Bridge very unstable. I find this to be extremely disappointing, seeing as it's literally the most expensive piece of software I've ever purchased for personal use. I've seen these two symptoms:
1. When running in full screen mode, Bridge crashes periodically. This happened on Vista, so I blamed Vista (of course), but even after regressing to XP SP2, I see the same symptoms.
2. Although I didn't see this on Vista, running on XP I see the problem described earlier in this thread, where clicking on a thumbnail displays the wrong image preview. When this happens the image displayed is one from a different folder! I solve the problem by clearing the cache, and it's OK for a while, but the problem keeps returning.
3. Even when exiting cleanly from Bridge (using File->Exit), Bridge often forgets where I was working in my previous session. I need to re-navigate from the very top level directory down through the hierarchy to my photo directory.
Again, it's very disappointing to invest so much in a single software package only to see such basic operations malfunction.

My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old compute

My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old computer.

if you need to deactivate, contact adobe support
https://helpx.adobe.com/contact.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

When I send my ical link to my better half , who sadly, still uses a windows based system- He cannot open the link back to my calendar- any help?

When I send my ical link to my better half , who sadly, still uses a windows based system- He cannot open the link back to my calendar- any help?

I've been using iCloud since it's inception as "mac.com" or whatever it was called. I've been able to Sync Outlook Exchange Calenars to my iMac, iPhone and iPad. However, I cannot get iCal (when viewed in iCloud) to display Exchange or Google Calender items.
It's odd, all other Mac versions of iCal are happy e.g. iMac, MacBook Air, iPad Air, iPhone etc. But nothing when I login to icloud.com and look at the iCal there.

Getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

Question
getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

/* stops annoying focus-selection boxes in FF3 */
*:active, object:focus, embed:focus
outline: none;
}

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

Yep, I discovered that. Thank you very much for the prompt and accurate reply.

Hi, I have recently done some online updates and now I have to restart my mac each time for the stupid thing to recognise my internet settings. Any help gratefully accepted.

Hi, I have recently done some online updates and now I have to restart my mac each time for the stupid thing to recognise my internet settings. Any help gratefully accepted.

Please be specific about the updates.
Were they Apple updates from Software Update or were they downloaded updates, including 3rd party updates from a website (Including Apple's)?

I have new apple iphone 4s which i noticed that it's gettting hot from back cover and right side. Can you please provide me any suggestion

I have new apple iphone 4s which i noticed that it's gettting hot from back cover and right side. Can you please provide me any suggestion

snehsri wrote:
I have new apple iphone 4s
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart... Reset > http://support.apple.com/kb/ht1430
Restore from Backup... Restore as New > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I have a png file 908px x 2324 px that is being reduced by Muse when placed. Any thoughts?

I have a png file 908px x 2324 px that is being reduced by Muse when placed. Any thoughts?

Yeeee, I did this! I follow the instruction as you wright here https://forums.adobe.com/thread/1362457 and now my image 100% in the size I need.
"After the image has been placed and resized, go to it in the Assets panel and right click and choose "Import Larger Size". By default Muse limits imported images to 2048 pixels in the largest dimension."
I create a composition of images in Photoshop and now I need to paste them into Muse in exacte size like in Photoshop. I save my images in Photoshop by naming them 200% imagename.png and then go to Muse- File - Place. After that I follow resize image and in the Assets panel import Larger size.
Is that the easiest way to past images from psd?

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that Apple sends? I already checked my files but i don't find anything that would cause that much of a big jump.

Hey hippie, this should help you figure out where your disk space is going http://pondini.org/OSX/DiskSpace.html

HT1338 I'm trying to upgrade to the OS X lion, and it says I need to have a Intel Core 2 duo. I currently have a 2 GHz Intel Core Duo. How do I go about making the change? Any help would be appreciated, Thanks Kevin

I'm trying to upgrade to the OS X lion, and it says I need to have a Intel Core 2 duo. I currently have a 2 GHz Intel Core duo. How do I go about making the change? Any help would be appreciated. Thanks, Kevin

I was afraid of that.... Thanks for helping!

I Have FireFox 12.0 on Windows 7 ...I notice that closing tabs takes 3 or 4 seconds to close..Any help ?

Similar Messages

Maybe you are looking for