I have flex builder 2 full version with charting full version. I want to upgrade to flashbuilder 4.7 what are my options

what will it cost

How full is your Mac's hard drive?
Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.
Your iMca model can take a max. RAM of 6 GBs.
You can replace one of the 2 GB RAM modules with a 4 GB module.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
OWC (macsales.com) has the proper 4 GB RAM module for replacement/upgrade.
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S4GB/
Good Luck!

Similar Messages

I have down loaded a track which was initially missing 1min 30 seconds. iTunes enabled my to reload the rack which is complete on the PC. However, syncing with my Ipad2 does not seem to replace the incomplete version with the full version. Thanks S

I have down loaded a track which was initially missing 1min 30 seconds. iTunes enabled me to reload the rack which is now complete on the PC. However, syncing with my Ipad2 does not seem to replace the incomplete version with the full version. Can anyone out there help?
Thanks S

Thanks for the response. Unfortunately, I've un-checked the track and re-synced the Ipad as suggested, but then re-checking and re-syncing han no effect. The track is still missing the final minute and a half or so. I've tried it twice, but the effect is the same.
Any other ideas? Would un-checking the entire music collection and staring again work, or is that a road to disaster?

Ever since Firefox 3, I have never been able to upgrade easily. I always get a message telling me I am replacing my version with an older version. How is that possible?

When I download the newest version (this time it was 5, but I had the same problem with 4) and I drag the Firefox Logo to my Applications folder in Mac OSX (10.6.7) I get a message saying I am replacing my version with an OLDER VERSION. How can this be? When I check the Firefox "About" tab, it tells me I am still using 4, so how, if I just dragged 5 to my Applications folder, can I be replacing 4 with an "older" version? Truth be told, my Firefox has never functioned properly since 4, and now I have little "Firefox hard drive icons" all over my desktop. What happened?
I am having trouble with Comcast's XFINITY and they told me to update and maximize my browser. I don't seem to be able to do that. I just downloaded Firefox 5.0, but my version still says 4.1.

When I download the newest version (this time it was 5, but I had the same problem with 4) and I drag the Firefox Logo to my Applications folder in Mac OSX (10.6.7) I get a message saying I am replacing my version with an OLDER VERSION. How can this be? When I check the Firefox "About" tab, it tells me I am still using 4, so how, if I just dragged 5 to my Applications folder, can I be replacing 4 with an "older" version? Truth be told, my Firefox has never functioned properly since 4, and now I have little "Firefox hard drive icons" all over my desktop. What happened?
I am having trouble with Comcast's XFINITY and they told me to update and maximize my browser. I don't seem to be able to do that. I just downloaded Firefox 5.0, but my version still says 4.1.

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box no go

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box but that didnt help.

I assume that there are legal restrictions on the way in which iTunes can get artwork automatically from any source apart from the iTunes Store (which is what the right-click > Get Album Artwork function uses). For example, even though the Gracenote service that iTunes uses to match CDs and retrieve metadata (artist, album, track titles, etc.) also has artwork functions, iTunes does not make use of these.
For manual addition of artwork, there are three cases where the image you select may not be correctly embedded in your media files:
your media are in a format that doesn't accommodate embedded artwork - typically WAV files. To embed artwork you'll need to convert to another format - Apple Lossless or AIFF if you want to preserve lossless quality, AAC or MP3 otherwise.
your media files are read only - to fix this, use Windows Explorer to find the folder that contains your files, right-click and select Properties. On the General tab there's a check box labeled "Read-only" - if this is checked, or is grey (sometimes blue), click the box so that the flag is unchecked and the box is white. Click OK, and then OK again when the "Apply changes to this folder, subfolders and files" option selected. Now try adding the artwork again.
Windows permissions issues are preventing iTunes from updating your media files (there's some anecdotal evidence of a change in this behavior in iTunes 12). See turingtest2's notes on Repair security permissions for iTunes for Windows for advice on fixing this, then try adding the artwork again.

I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this?

I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this? I recently bought aperature, and it has been since then that I get this warning.
Thank you!

No I have not tried those things. I don't even know what that means I suppose I have the newest version of aperature; I just bought it 4 days ago.

I have iPhoto 08 and have been happy with it. Don't want to upgrade. But suddenly, when I click on an event, instead of all the photos, I just get one- enlarged- and cannot move to the next one. The photo just jumps up or down. How to solve?

I have posted "submit" twice and keep getting requests to submit again. Now being asked to write a summary! Here we go. I have iPhoto 08 and am happy with it. Don't want to upgrade. But suddenly when I click on an event, instead of getting all the photos, I just get a large version of one photo and cannot move on to the others. The right arrow will not move it and the photo just jumps around.

Note the slider bottom right of the iPhoto Window. Drag it left.

HT201364 Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution thanks

Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
thanks
Mujeeb

See options below:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Full Load" and "Full load with Repair full request"

Hello Experts,
Can any body share with me what is the difference between a "Full Load" and "Full load with Repair full request"?
Regards.

Hi......
What is function of full repair?? what it does?
How to delete init from scheduler?? I dont see any option like that in infopackage
For both of you question there is a oss note 739863-Repairing data in BW ..........Read the following.....
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
Other terms
Restore data, repair data
Reason and Prerequisites
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets.
And also search in forum, will get discussions on this
Full repair loads
Regarding Repair Full Request
Instead of doing of all these all steps.. cant I reload that failed request again??
If some goes wrong with delta loads...it is always better to do re-init...I mean dlete init flag...full repair..all those steps....If it is an infocube you can go for full update also instead of full repair...
Full Upload:
In full upload all the data records are fetched....It is similar to full repair..Incase of infocube to recover missed delta records..we can run full upload.....but in case of ODS does'nt support full upload and delta upload parallely...so inthis case you have to go for full repair...otherwise delta mechanism will get corrupted...
Suppose your ODS activation is failing since there is a Full upload request in the target.......then you can convert full upload to full repair using the program : RSSM_SET_REPAIR _ FULL_FLAG
Hope this helps.......
Thanks==points as per SDN.
Regards,
Debjani.....
Edited by: Debjani Mukherjee on Oct 23, 2008 8:32 PM

HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.

I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
Mike

A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

HT1553 i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

When you restore from a Time Machine back up you can pick and chose what is restored. It is not an all or nothing process. Nor do you have to do the partial restores all at the same time. If days after the first partial restore you find something else you want you can restore just that.

I have an Ipad with IOS5.1.1 and want to upgrade and i can't, can anybody tell me why i can't do this?

I have an Ipad with IOS5.1.1 and want to upgrade and i can't, can i do this?

The Original iPad can only be updated to IOS 5.1.1 because of hardware limitation.

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please help

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

I have flex builder 2 full version with charting full version. I want to upgrade to flashbuilder 4.7 what are my options

Similar Messages

Maybe you are looking for