I have footage shot on a p2 camera, why won't all of the clips transfer when using Log and Transfer?

Only about 60% of the clips transferred over or was shown in the Log and Transfer window.

Offload the cards...back them up.  That is priority #1.  Do that first...then return the camera.  Then try mucking about with this.
Back up the ENTIRE card structure.

Similar Messages

  • Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

    In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk?  With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files.  If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

    Hi jphil and Tom
    I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
    Folder structure is
    AVCHD
         BDMV
              CLIPINF
                   .CPI files
              Index.bdm
              Movieobj.bdm
              PLAYLIST
                   .MPL file
              STREAM
                   .MTS files
    AVF_INFO
         3 files (.bnp, .inp, .int)
    DCIM
         101MSDCF
              empty
         MODELCFG.IND (file)
    My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
    I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
    I downloaded the latest version of codec updates from the Apple support site but no difference.
    Thank you in advance
    Giorgio
    Freiburg, Germany

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

    Hey,
    I have Final Cut Express 4.0.1 and a JVC everio camera.
    Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
    please help !

    FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
    If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
    What is your camera's exact model name and number?

  • FCP Crash when opening log and transfer with some AVCHD footage on a card

    Hi,
    I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
    I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
    When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
    Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
    Any suggestions?

    Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
    Open the L&T window.
    Click on the gear icon towards the upper center of the frame.
    Select "Plain Stereo" For the AVCHD plugin.
    MtD

  • Importing 60i footage using log and transfer, not working :(

    Hi, when I import my 60 fps footage in to Final Cut Express using the log and transfer method (because the footage is AVCHD) it always changes the frame rate to 29.97 even if the frame rate is lower like 24 fps. I need this to be 60 frames per second because I'm working with a slow motion shot and need to get the most frames from the footage.

    Thanks, David,
    We had done all of those little tricks to no avail... but we did figure it out.
    It turns out it was a corrupted sequence that was causing the problems.
    Trashed the sequence, now everything's happy again.

  • Canon HG10 -Can't tranfter footages using log and transfer

    I'm trying to transfer from canon HG10.Log and transfer not reconising the videos.Any solution please.
    GUna

    Hello,
    I have the Canon HG10 and use the Blackmagic's "Intensity" High Definition HDMI Card with Final Cut 5.1 HD I capture the video uncompressed through HDMI it works great here's the link
    http://www.blackmagic-design.com/products/intensity/ working with Mac Pro Intel 3.0. running Leopard, have installed three internal hard drives raid them together to run uncompressed video for edit. Hope this helps they are working on updates for the card to work with other software.
    Hope This Helps
    Have a good day guys

  • I need to know best way to edit MXF files, with least rendering, is that converting the MXF or Log and Transfer? the end product is dvd, but I have lots and lots of these projects to do.

    I am about to comence my Edit, and was told of Mpeg Streamclip, however this doesn't seem to work with my Canon XF305 Clips, the reason I was told to use it was so I wouldn't have to Render in Final Cut Pro all the time.. I do have the Canon Disc with the Plug in Utility and the update from their site.
    Is it best to Convert these MXF files first and import them into FCP or use 'Log and Transfer', so far I am unable to do either!!
    The projects on the timeline will have introduction .Movs already on it as a Template to re-use again and again with the new Footage ( MXF Files ) to be added and edited with transitions etc..This process is repeated again and again but with different MXF clips each time.
      I am looking for the quickest and best way for workflow as there are 80 or more projects to do, each with 10 or so clips to be added to the timeline and Exported for DVD...Will I have to then Compress to fit onto DVD's??
    I know Streamclip is an Mepeg 2 app but I thought the Canon XF305 Shot as mpeg2....
    Is Log and Transfer my only Option?
    Basically I need to know the quickest for Render purposes, and of course, the best way so the files aren't so huge etc etc.
    Please, any suggestions would be greatly received....

    We only work with PR422 files in FC7.  We use Shane's workflow with all 5D & MXF footage.
    Make your life easier and stick to the ProRes family for your footage and edit sequences. Avoid H264 & convert any you have to ProRes.
    Unless you are considering Blu-Ray the only way to deliver video on a DVD is to convert it to SD.
    Depending on the length of your show you can make a Blu-Ray in Compressor but you have very limited authoring options when compared to DVD Studio Pro.
    Compressor can also convert your HD to SD mpg-2 & Ac3 files. The best results usually come from setting the frame controls in the mpg-2 setting of Compressor to best. Depending on the the length of the show and your Qmaster settings this can take quite a while.
    I personally find Compressor's HD to SD DVD conversion varies. Sometimes it is wonderful and sometimes not so much. I prefer the following as it is usually is faster and very consistent.
    Export a quicktime movie (not QT conversion) of your final sequence
    Import the exported HD file back into FC.
    Create a SD 16x9 sequence and then drop in the recently exported HD seq and render. Rendering the sequence basically has FC doing the HD to SD conversion. Export the SD sequence and then convert to mpg-2 & ac3 in Compressor. While this does take time I still find it faster than Compressor with Qmaster utilizing all cores.
    Another option is using jobs in Compressor
    http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
    In this workflow you would have Compressor convert the HD file to SD and then through jobs convert the SD file to mpg2 & Ac3. 
    In theory the jobs version could be faster (based on a number of variables- length, Qmaster, etc) but I haven't had time to compare the two. 

  • AVCHD log and transfer - Only from a camera?

    I am thinking about upgrading my camera to a AVCHD camera.  I saw on a post that you can only log and transfer AVCHD footage from the camera and not just the card attached via card reader.  Can someone shed some light on this.  I want to be able to shoot, transfer/backup onto an external HDD and then Log and Transfer from the drive.  I want to keep the camera busy out in the field and not tied up on my desk.
    Thanks community!
    Brian

    You may fing this helpful:
    http://library.creativecow.net/articles/ross_shane/tapeless-workflow_fcp-7/video -tutorial
    When using card readers make sure it supports the larger capacity cards or at least the size card you are using.
    Al

  • Log and Transfer Issue with JVC Camera.

    Hello all,
    I am using JVC GY-HM100U and Final Cut Studio (FCP7.0.3).
    I have installed JVC_Plugin1_0_3.dmg as Apple recommended.
    However, when I connect SD card to FCP, I can not still use 'log and transfer' of FCP.
    Do you know what's the issue is?
    Thank you.

    The warning sign pops-up as below.
    "CLIP" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media. 
    I am recording in Kingstone 16GB Class 10 SD card.-I have formatted before using it.
    I am shooting with 1080 60i.
    Thank you.

  • Will upgrading GPU help log and transfer of 7D footage to ProRes

    I have a 1.1 MacPro with 2.6 quad and ATI X1800.. Will upgrading my GPU to a ati 4870 5770 help with my log and trasnfer speeds..
    Does Compressor or FCP use GPU during transcodes or log and transfers for either encode or decode?

    Will upgrading my GPU to a ati 4870 5770 help with my log and trasnfer speeds..
    No. Only processor speed.
    Does Compressor or FCP use GPU during transcodes or log and transfers for either encode or decode?
    No. Only Motion and Color, and a few plugins (FXPlug) in FCP utilize the GPU. Compressor, FCP log and transfer...that's processor power.
    Shane

  • I have material shot on a new camera in 16x9.  When I import it into FCPX the media is "squished" into 4x3.  How can I get it to look right?

    I have material shot on a new camera.  It's a Panasonic AG-HPX250EJ.
    According to the clip properties of the media on the camera the footage was shot 16x9 at a frame rate of 50i
    The format is DV25_420
    The problem is that when I connect the camera to the iMac via a USB cable and attempt to import the media into FCPX (I'm running version 10.0.1) it displays as 4x3.
    What am I doing wrong?
    Needless to say I have a deadline looming for the edit and I'm rather tearing my hair out. 

    If problem persists after importing via FW
    Select the clips in the event browser and in the inspector select INFO.
    Ensure that the View bottom Left is set to SETTINGS.
    You should be able to change the way FCPX interprets the clips via Anamorphic Override.

  • Correcting footage shot on auto-everything camera

    Hi,
    I searched under several keywords but couldn't find any posts relating to my problems.
    I have some colour video footage shot outdoors on a camera that has no manual controls whatsoever.
    Can anyone recommend a filter or other FCP technique (or any other software) to help me bring up the under-exposed footage and bring down the over-exposed parts to make a more uniform final product? The fluctuations happen pretty rapidly and I have 1.5 hours of footage so something automatic would be really helpful. Also the colour shifts slightly throughout the footage (also sometimes rapidly), but not as badly as the exposure. Any sugestions for solutions to the colour issue?
    Thanks for your thoughts.
    Tim

    Get out the manual and read up on the 3 way color correction filter. Pretty simple to use for basic exposure issues and color balance. Not really automatic but remember that automatic was what caused the problem in the first place.
    One method of changing cc settings as the footage changes is to apply the filter to a clip and then cut the clip where the changes occur. Select each segment and correct for exposure and balance, then add cross dissolves between the segments.
    rh

  • Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

    Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

    David, the camera shoots .mov files. I have the latest version of QuickTime installed but still nothing.
    I teach high school, but I'm reluctant to download FCPX for my students at the moment. I may try it but I really want to stick with what we're using currently, at least for now.
    iMovie started to import files, but very slowly. I guess I'm frustrated that the files shot on the Canons I also use transfer just fine, but the Aiptek camera isn't cooperating.
    Would you suggest using MPEG Streamclip?
    Thanks again in advance.

Maybe you are looking for