I have forgotten my passcode, I typed in the wrong numbers and now it is disabled. How do I fix this?
I have forgotten my passcode, the 4 digit number, I then typed the wrong number and now my ipad says disabled try again in an hour. I do not remember the number. How do I fix this? Please Help.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost.
Similar Messages
-
I have disabled my new ipad by entering the wrong pass code to many times. How do i fix this problem?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i have recently purchesed some ringtones but they only show up as mucis how can i change it so that they are ringtones.....
You have to enter the Apple ID and password for the last ID used in Settings>iCloud.
Try recovering the password for the listed ID
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??
Hey there byambar,
Welcome to Apple Support Communities.
It sounds like you’re describing two issues, the first issue is related to the Zoom accessibility feature and the second issue is related to the device being disabled.
Take a look at the article linked below to learn more about Zoom and the other accessibility features on your iPhone 5.
Use Accessibility features in iOS - Apple Support
This article will help you resolve the issue with your iPhone being disabled.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Take care,
-Jason -
My iPhone 4 keeps having the "Restore Needed" message pop up on my phone. I have restored my phone several times this week, and it still keeps happening. The "Restore Needed" message pops up, so I immediately do a hard shut-down. Once the phone restarts, the phone then says "Activation Required". I keep shutting down and restarting the phone, and sometimes it snaps out of it, seemingly on its own. Sometimes I have to go home and restore and activate my phone. How do I fix this? I'm 2.5 hours away from the closest Apple store and 1 hour away from the closest AT&T store.
Thanks!
AutumnMake the time and take it to the Apple Store. Make an appointment first. Or you can call AppleCare and go for a mail in replacement.
-
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
-
I downloaded MPlayer software and now I have malware, windows keep opening up in Safari non stop for ads for cleaning your mac and other weird sites. How do I fix this?
You have installed Adware. Check the links below for options to remove the Adware
http://www.adwaremedic.com/index.php
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
My mac computer did an update with the Lion software, since then, the browser isn't working at all. How do I fix this?
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
After downloading itunes on my new computer all of my songs have an exclamation point in front of them and it says the song could not be used because the orginal file could not be found. How do I fix this?
Hey waltee911,
It sounds like you're seeing something similar to this picture:
If that's the case, the following article has troubleshooting steps to solve the issue:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
I have Windows 7 Professional and I used to be able to move the curser over the Firefox Icon in the taskbar and it would show me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?
Hey MikeDo,
Do you have the option checked for ''Show Tab Previews in the Windows Taskbar''? If not, just go to ''tools->options->tabs.'' You can find more information on what each of these settings do in the Knowledge Base article [[Options window - Tabs panel]].
Hopefully this helps! -
whenever i have downloaded itunes a pop up shows up saying "apple application support was not found" how do i fix this?
Hi jahhaas,
Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
http://support.apple.com/kb/HT1923
Cheers,
GB -
I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?
keokipineapples schrieb:
I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
Transfer them to your harddisk immediately.
External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
Illustrator support for networks and removable media -
I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...
Hi kmkrodel,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud on your Mac or iPad after a change in your Apple ID password, you may find the following article helpful:
iCloud: Account troubleshooting
On the other hand, if you are talking about sharing files from your Mac to specific apps on your iPad via iTunes, then this article may be of more use (Note: When using this function, you will only see apps that support file sharing, not all apps on the device):
iOS: About File Sharing
Regards,
- Brenden -
I have forgotten my password to unlock my screen, after several attempts my IPAD is now disabled, does anyone know how I can fix this?
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
The problem I think is linked to my inability to download and/or play songs with explicit content to my phone. I
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
Maybe you are looking for
-
SQL Developer blocking vs non-blocking
Hi, Is there a way in SQL Developer 3.0 to have a non-blocking SQL call? In Oracle Forms we can choose between blocking and non-blocking SQL Net connections to the database. Does SQL Developer have the same capability? If so where exactly are those o
-
Using variable in prompt label
Hi, Does anybody now if/how you can use a session variable in a prompt label? I want to make a multiligual prompt. regards John Edited by: John Minkjan on Apr 15, 2009 4:28 AM
-
Flash player not working in IE 10
Using IE 10 with Windows 7 sp1. Flash videos on ALL websites do not play, I get the prompt to click here to install flash player. I have installed newest flash version countless times. The add-on Shockwave Flash Player is enabled. Flash movies pl
-
URL recognizer broken in 10.1.2?
Hi all, During initialization i try to bind an EditorAddin to a Node (see code). The binding works fine for the TextNode, but when i extend TextNode or use DeployableTextNode the binding fails (without any error). The editor just doesn't show up. In
-
One way child BPEL getting rolled back 11g
Hi, I am stuck with a strange issue. Here is my design : Bpel1 1. Invoke : Call One way Bpel2 -> Bpel 2 calls DB adapter to insert data to Database 2. Throw rollback When i throw rollback in BPEL 1 both : BPEL 1 & BPEL 2 gets rolled back , I need BPE