I have formatted the macbook pro 13,now i see 150GB drive and 350GB drive is not seen,pl advise to recover the 350GB and make single hard disk without partition

i have formatte the macbook pro 13 as it was slow and with boot camp,at the time of format sesstion stopped at 61% and was asking 6 hours to
complete.this was for 24 hrs on condtion so i skipped and now i find only 150 gb reserved for boot camp,where 350 allocated for mac is missing
pl advise the solution
i wish to install maverick so i started this on my 10.6.8 verstion macbook
thaks and regards
Dr srinivas

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Similar Messages

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that Apple sends? I already checked my files but i don't find anything that would cause that much of a big jump.

Hey hippie, this should help you figure out where your disk space is going http://pondini.org/OSX/DiskSpace.html

I have a new macbook pro. I'm seeing my wife's iphone contacts on my icloud. I can't figure out how to get my iphone contacts synced up with my new macbook and get rid of her contacts. Suggestions?

I have a new macbook pro. I'm seeing my wife's iphone contacts on my icloud. I've done everything I know to do to make sure my apple id is correct and has my information. I can't figure out how to remove her contacts and add my iphone contacts to the cloud or my macbook pro. Any suggestions? Thanks.

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

I have an older macbook pro os x 10.5.8 , processor 2.4ghz intel core 2 duo 2gb . Can I upgrade it and is it worth doing?

i have an older macbook pro os x 10.5.8 , processor 2.4ghz intel core 2 duo 2gb . Can I upgrade it and is it worth doing?

Yes. Here's the information:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Only you can decide if it's worth doing.

I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

I was just watching / streaming TV off Safari on my actual TV.
I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
Software update popped-up and said there was an update for Java and for SMC.
I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
It won't work in Mirroring or set up as an extended display.
I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
What could it be?!

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

I have a new macbook pro hooked up to a belkin wireless router. My HP officejet printer is also connected to the router. I cannont get the printer to work from my computer without restarting my computer evertime I want to print. How do I fix this?

I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome

Mac OS X 10.7 Help: Troubleshoot a network printer

I have a new MacBook Pro. While getting rid of voice over I ended up with a black box with icons in it and I cannot get rid of it and I can't get off the home screen

I have a brand new MacBook Pro . I got into voice over and then figured out how to stop that but now have a black box in the middle of the home screen and that box has a bunch of icons .....(Keyboard, pointer etc) I cannot get it to close and I'm not able to go past the home screen. Help

If you click on that window, the menu bar should change to whatever program that is. Then click the program name and click Exit.
If that doesn't work, click the Apple icon, then Force Quit. Look for something that says Not Responding and quit it.
Last... if nothing else works reboot and see if that does it.

Macbook Pro retina display 13 inch stopped charging. Charger LED also not on while plugged in. The battery fully drained off but the system can detect the charger when it was switched on.

Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.

Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem.

Does the Macbook pro non retina also come with haswell processors.. After 22oct 2013 event??, Does the Macbook pro non retina also come with haswell processors.. After 22oct 2013 event??

I am planning to change my Macbook pro and due to office network structure i need a macbook with ethernet port. It seems that the only option i have is the 13 inch macbook pro non retina.. I just wanted to confirm that will the basic non retina model of macbook pro will also come with HASWELL processors or not..? (After the 22 oct 2013 apple event)

13-in remains unchanged since early 2013 update. Source: http://www.engadget.com/2013/10/22/apple-unveils-haswell-based-macbook-pros-with -retina-display/

My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

HT201250 i have format my macbook pro and lost all data how could i get back again please advice me?

plz help

"Data Rescue II" from prosofteng.com has a free download demo available. You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s. Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
*FREE* DOWNLOAD DEMO
FileSalvage
**FREE** Download DEMO
Remo Recover
**FREE** DOWNLOAD TRIAL
FILERECOVERY
**FREE** DEMO
Professional data recovery specialist service. They are very expensive. Might be worth it depending on how important your lost files are.

I have a new Macbook Pro. It won't join the wireless networks that my old Macbook Pro joined; only some of them (I'm talking open networks). What can I do, please?

I have a new Macbook Pro. It can see, but won't join the open wireless networks that my existing Macbook Pro joins. What can I do, please?

Mac OS X 10.7 Help: Troubleshoot a network printer

Does the macbook pro have a 'dv terminal'?

I have macbook pro and panasonic dv video camera. Panasonic manual says I can use a dv interface cable to connect the camera to the computer if the computer has a dv terminal. Does the mac have a dv terminal? is it one of the firewire ports?
many thanks

Hi nandi,
always learning something new here: I have never heard the term 'dv terminal' but a quick goodgle search showed that this is another name for a 4-pin FireWire port.
So since the MacBook Pro has two FireWire ports the answer is YES.
But be aware that the Firewire ports on the MacBook Pro are full-sized ports either 6-pins for Firewire400 or 9-pins for Firewire800.
So the usual 4pins connector for Camcorder does not fit.
Regards
Stefan

I took my iMac to be fixed and when i got it back, mail was not set up. I called Apple Support and they helped me set up mail. Then the emails went to trash on the iMac and on the MacBook Pro (same emails). There are no numbers by the 'inbox' to tell how

I took my iMac to be fixed and when I got it back, mail was not set, so I called Apple and they helped me set up mail. Now the new mail goes to trash and there is no number by the 'inbox' to tell me how many new messages I have. I cannot save a draft to 'drafts.' There is a large number by 'trash' (I think all mail went to trash - including drafts). When I send myself an emai, it goes to trash also. This is on both my iMac (the one taken in) and my MacBook Pro (same emails) which was not taken in.
I went to 'rules' but have no idea what to do there. There are no rules in the rule box. When I click 'add rule' it puts 'rule 1' in the rule box, but since that was not there when I took it in, I delete it to have an empty rule box.
Can someone pleasehelp me. I am completely stupid with all this. Do not under stand what is suppose to be set up in 'rules.'
Thank you so much,
Arudi

Now new mail is coming to both computer's inboxes but there is no number on the stamp icon on dock to show number of emails on the iMac. Nor is there a number by either email address under MAILBOXES/inbox (sidebar) on the iMac. This number is showing on MacBook Pro.
I also can save drafts now on both computers.
Seems the Pro is fixed and the iMac is only missing the numbers on dock icon and by addresses in inbox.
Now that the problem is less, I feel i am wasting your time but will continue so maybe I can get those numbers back.
Two emails > AT&T email and gmail.
Apple's Mail program for email - yes, and gmail.
IMAP for both accounts.
Did not change mail configuration on MacBook.
The iMac and MacBook Pro have the same mail configuration except in Accounts/mailbox behaviours/store draft messages on the server was not marked on MacBook > it is now.
'Store junk messages on the server' was marked on one computer for gmail, but is unmarked on both now.
On the iMac, Accounts/Accounts info/Outgoing mail for gmail is smtpgmail.
On the MacBook Pro for gmail it is smpt.gmail.com (plus) my email address.
Rules/Add rule window, on the MacBook third line is 'Any Recipient', on the iMac third line is 'From."
The last box on that line has my email address on the MacBook.
The last box on that line has the last address I sent an emil to (last night), on the iMac.
On the last line on iMac, no box was selicted for 'to mailbox' > I choose 'inbox' because it is on the MacBook Pro.
Now I have a Rule #1 and am not sure I should have because there was no rules marked when I took the computer in.
Thank you. I relized I had done the labeling wrong when so much of my question appeared twice and no one else's did. I know how to do it now.
Thank you so much,
Arudi

HT204347 Do you connect the charger in the MacBook Pro battery damage if using device ?

Do you connect the charger in the MacBook Pro battery damage if using device ?
i am sorry i not good speak english

Provided you are using the correct charger for your Mac (13" have a 65 watt charger, 15" and 17", an 85 watt charger), it has enough capacity to power the computer for normal tasks, and the leftover power can charge the battery at the same time. If you are doing something very intensive, there may not be leftover power, but the Mac will take power from the battery if needed. Once the battery is fully charged, the pilot light in the charger plug will change from orange to green and no further charge will be applied to the battery.
You can use your Mac plugged to the charger with no damage to the battery or the computer.

I have formatted the macbook pro 13,now i see 150GB drive and 350GB drive is not seen,pl advise to recover the 350GB and make single hard disk without partition

Similar Messages

Maybe you are looking for