I have found that iMovie stalls when converting a wmv file
and when it does work, it takes way to long to complete the 2step process.
Is there a solution to my problem?
Thanks,
Hi
iMovie usually can not use .wmv files.
.wmv - is no Video-Codec - but a container and can hold a variety of codecs - most of them in need to be converted to a Codec iMovie can use.
If it opens in QuickTime-player, then open Inspector [cmd+I] and read
- Video formatted as (Codec) : nnnnnnnnnnnnnnn
- Frames per second : yyyyyyy
What does it read ?
Yours Bengt W
Similar Messages
-
My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
Best regards,
Rob.PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751 -
my daughter put a thick layer of vaseline on my key board. I wiped it off but have found that residue is coming up from the cracks between the keys when I type. Any cleaning suggestions?
At least vaseline is non-conductive. It might be easier to replace the keyboard.
-
In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?
It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file. -
With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
Thanks
RozAre you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?
Time Machine error: Apple Support Communities
OSStatus 5 when trying to use Lion...: Apple Support Communities -
I recently downloaded my previous purchased items from iTunes but I have found that some songs dont play or have only downloaded half of the actual song :/ when i go to iTunes>Purchased it says that the songs have already been downloaded, which means i cant re-download them. is there a way I can re-download my previous purchased songs?
Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.
Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software. -
I have found that my Mac Book Pro late 2011 15 inch is slower than I expected with certain downloads, or working with iPhoto than expected compared to my previous Windows 7 PC. Would adding RAM be of any value in speeding up the process?
how to tell if your mac needs more ram
-
I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!
You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device? -
I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?
Have you deleted anything from your iTunes library ? Have you checked to see if they are still on your computer, but not listed in your iTunes library ?
If not then do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for redownloading ? If they don't show there and others do and they are still in your country's store, then check to see if they are hidden : http://support.apple.com/kb/HT4919
If they are no longer in your store for redownloading (or you aren't in a country where music videos can be redownloaded) then you will need to copy them back from your backup of your library/downloads. -
I've just merged my Aperture and iphoto libraries and have found that my combined new Aperture library has grown from about 30 gigs (the total size of the Aperture and iphoto libbraries prior to merging) to 40 gigs. Also, in reviewing photos in the Aperture browser I find that photos appaer as duplicated, one photo with no tag (the original) followed by the same photo with a small tag (suggesting edits). HAs the merge process caused an unintended increase in library size? My initial reason do consolidate the libraries was to eliminate the "referenced" portion fo the Aperture library that refernced the iphoto originals. Any thoughts as to how I can get one consolidated non-referenced combined libray inside Aperture with no duplicates. I run a Time Capsule and can access backups of the original Aperture and Iphoto libraries if I need to repeat the process. Thanks for any help. Jim.
My initial reason do consolidate the libraries was to eliminate the "referenced" portion fo the Aperture library that refernced the iphoto originals
One for the Consolidate Masters command.
By importing the Library you brought over everything, lock stock and barrell, and your Aperture library still points to those referenced masters in the iPhoto Library.
Regards
TD -
I have found that the only music left in my itunes library is the music i purshased from itunes. All the CDs i uploaded to my computer have vanished from both my ipod and my computer.
Will i have to upload all the CDs again or is there a way i can recover the lost content ?If you can't find them
iTunes: Finding lost media and downloads
Then you will have to reimport them into your iTunes library. -
Can we have triggers that get fired when we Query a table?
Hi All,
What could be the pricise answer to the following question?
1. Can we have triggers that get fired when we Query a table?
2. What the relation of triggers and delete, truncate statement in one line?
3. What is data modelling? Why is it necessary?
4. Which are not mandatory but essential files in Oracle?
Regards,
AAK1. Can we have triggers that get fired when we Query a table?for INSERT, UPDATE and DELETE statement, yes
for SELECT statement, no.
Question 2 is not clear for me.
Question 3 is very very general ...
4 >Which are not mandatory but essential files in Oracle?
all database files (initialization file, control files, datafiles, redo log files) are mandatory. What is not mandatory but considered as a (very) bad practice is
to have only 1 control file and only 1 redo log group with 1 redo log file. -
I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS. While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one. This is a big problem. I must be able to save on the newer computer. Do I need to buy a new computer with a more up-to-date OS? Please help.
Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.
Maybe you are looking for
-
How to open a new pop-up window on click of a link using OAFunctions
Hi , I have a requirement to open a new pop-window on click of the responsibility name(functions available under responsibilities). The current URL /link is driven using OAFunctions. Any idea, how can i open a new window while still keeping the paren
-
Songs in my iTunes Library are being skipped when trying to play them
Hello, Would anyone know why I can't play any of my songs listed in my iTunes Library? All of the songs are in the cloud. When I try to play a song it will jump over to the next one in the list and jump over and over again without playing any of the
-
TS2709 Don't have any success starting Apple TV with my iMac.
Not sure if my sharing settings are appropriate to share with Apple TV from my iMac?
-
Addition of a language font in task list
Hi all, i have this requirement wherein the PM checklist is given to group of people who doesnt know English and the checklist is in marathi,(language of Maharastra-part of India) requirement is same is to be shown in SAP. Is there any possibility? R
-
Code for SD pricing procedure for Australia
Dear All, Can anybody tell what is the standard code for SD Prcing Procedure for australia.