I have free account and it was working well till yesterday , its started to asking me to verify my payment info ,,,,
I have free account and it was working well till yesterday , its started to asking me to verify my payment info , and i didn't put that when i create it in the beginning !! I tried pushing the Done button but it won't work , its keep asking me to verify my payment info??? and the redeem payment wont work anymore??
How do I solve this problem???
It's just how they do it now. What it shoudl do is charge you the dollar, then the dollar comes back off.
Similar Messages
-
Now when I realized I couldn't downgrade that easy I tried to restart my computer and I held down c but then I realized I didn't save my documents and other things I let go and then it tried to get me to start from scratch so I held down the power button and now that I'm trying to restart it, it just sits on they gray start up screen with the loading Pinwheel and it's been her for about 20 minutes!! How do fix it?? Thanks for everyone's help!!
So you did a force quit and now you are trying to start it again right?
If so and the "beachball of death" is still spinning, deny the machine it's power source, remove the power cord and the battery and any periphials you have plugged in ie: extra drives etc. Let it rest for a minute plug it all back in then try re-starting in safe mode. If all is well shut down and restart normally.
If you get this far repair the disk and permissions using Disk utility.
Hope this helps
here is a link for the safe mode start-up: http://support.apple.com/kb/ht1455 -
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
It was all fine till yesterday.. no proxy nothig is blocking. All other browsers working fine. Please assist
The connection was reset The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few
moments. If you are unable to load any pages, check your computer's network
connection. If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.Please try http://support.mozilla.com/en-US/kb/error%20loading%20web%20sites#w_interrupted-or-reset-connection
-
I cannot get the thumbnails for my catalogue. I have tried downloading the Lightroom program again and it tried to fix it but could not. I have gone to the page to check off thumb nail and that hasn't made any difference. I have the most recent update of lightroom. I can download the picture but I do not know which picture it is. This is frustrating as we are on vacation and i casnnot work on my pictures.
Hello,
There are two different things here, an OS update and a software update.
Mac OS X 10.5 is the version of OS while the .8 at the end is the software update (release patches)
The most current software update for Mac OS X 10.5 is 10.5.8
No more software updates available. You would need to upgrade the OS, which would be to Mac OS X 10.6
Your new iPhone 5 would require iTunes 10.6 which is only available for OS X version 10.6.8 or later.
Your would therefore need to upgrade your Macbook to this version of OS.
It maybe brought on DVD via Apple directly (Contact Apple ) or using any good online vendor like Amazon.
Best of luck -
Help I have an iPad 2 and recently had to upgrade to 6 OS. All was well until yesterday when I received N error message that I cannot connect to iTunes. I tried the reset and changing the date and neither worked. Does anyone have another solution that works? I see others are having the same problem.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
My macbook pro will not start up. Its charging and fully charged but wont start. Was fine till yesterday when keyboard stopped typing and then shut down and now wont start up
If after an SMC reset it will not power on then I suggest you take it to an Apple store or Apple Authorized Service Provider for a diagnostic check and estimate of repairs.
Apple store Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
need help
Have you restored as a new device and tried your phone before you add any apps back? If you do this and you're still having problems, then you are having a hardware malfunction and will need to bring your phone into Apple for evaluation and possible replacement.
-
I have a belkin 7 adapter for additional usb ports for my mac pro. It worked fine without problems till recently when the message regarding usb port drawing too much power and the computer shuts the port on the mac pro down. The strip comes with its own power supply adapter. The attachments are additional hard drives used as backups and independent data. Other than disconnecting it are there any fixes?
You're getting the message because you're exceeding the available current, probably as a result of bus-powered drives. The power sources for hubs are rather small. Try using drives with their own power supplies.
-
iMac 2.5 GHz
Intel Core i5
4GB MemoryI have a similar problem.
Moreover, as my external drive is split in 2 for (a) regular storage // (b) time machine usage, I can see in the Finder that I can connect to the (a) regular storage part and use it normally (image 1).
And I cannot connect to the backup part in Finder , nor see it in Disk Utility, nor use it in Time Machine (although it's listed in the Time Machine preferences, image 2), as it does not connect (image 3).
Can somebody help? -
Right after I put on my username and password, it says "veryfing" and then it goes back to the log in page. I don't know what's going on at all. My apple ID is ok, since I can purchase apps and other stuff on Itunes. I've used Imessage and FaceTime before, it happened suddenly. Does anyone ever had this problem? Than you.
Try:
iOS: Troubleshooting Messages
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
iOS: Troubleshooting FaceTime -
Hi I need help tryna activate my iphone 3gs after trying to ugrade the software. it wont allow me to activate my phone now
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
TA44551 I have a 4th gen iPod and it was working perfectly the night before now wont charge
My iPod isnt charging and it was working perfectly before now its not please help
See the not charging topc of this Apple support document.
iPod touch: Hardware troubleshooting
B-rock -
hi I m having iphone 5.I got it on my birthday, it was working well till today...I dont know what happened to it today..it started showing "No sim card installed ".how is it possible i talked to my friend on the same phone only 2 min before ds notification..kindly help me out
You could try removing the sim card and cleaning it - then put it back.
I assume that there is supposed to be a sim card in your model of iPhone 5 ? -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
Maybe you are looking for
-
Having issues after installing Essbase V9.3.1,configuring the SQL interface
I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface. When tried to run an ESSCMD script to perform BUILDDIM operation on Essba
-
Flash drive won't open, or I'm not seeing it! HELP
I have a flash drive plugged into the correct USB port on my iMac .. but it does not automatically open on my desktop, and I can't find where to locate it! I need to ultimately copy the content from the flash drive onto either a CD or a file that I
-
Re-Installtion of Issue with iMac (circa 2009) - disk has been reformatted
imac circa 2008 /2009 - I have downloaded maverics and have it on a usb drive that has been reformatted GUID. the imac disk has been reformatted GUID Startup manager is not showing up? (earlier tried MC OS Show Leopard instal disk - that would hot lo
-
Rejected records into different Table.
Hi , I have a .ctl file and .txt file. for the normal scenario, I use SQLLDR to load data into my table using ctl file and all rejected records will be sent to bad files. But I wanted all the unloaded or Bad records into different table. do we have a
-
By selecting the dropdown list a new empty browser tab is getting opened
Hi, When i try to pass the parameters in Bi report, by selecting the dropdown list a popup(new empty browser tab) is getting opened why is this so. Can anyone help me to sort it out. Edited by: user9093700 on Jul 6, 2012 8:57 AM Edited by: user909370