I have G5 PPC with OSX 10.4.11 and java

I have 1.6 GHz G5 PPC with OSX 10.4.11, 9.2.2 and java. It connects to internet thru DSL modem and Ethernet router. I can no longer get blue user login screen after OSX loading; black command line screen asks for Darwin login. I have used "Applejack" auto for repair, but still no normal blue user login screen. What happened? How to fix?
Primary 80 GB drive nearly full except about 16 GB remaining. I have replaced DVD drive, but cannot readily open drive to use OSX disk or Disk Warrior 4 for further repair.
Seems like it can't find users on startup disk.

Hmmm..
If that doesn't work, you're going to have to use a sticky finger to slide the drive door down, then once that's open, a bit of tape to hold it, then look on the front of the drive and there *should* be a pinhole somewhere (most likely down at the bottom of the opening, below the tray it will be hard to see) that you can put a paperclip into to pop the tray open a bit - then you *carefully* pull it out the rest of the way.
It WILL have a bit of resistance to the pulling, but as long as you go slow and steady, it'll be fine. The little servo-motor that opens the door has a high gear-ratio so it's stiff.
Good luck!
Deb.
Edit to add: Are you accessing this site wth another Mac? If so and it has a FireWire port on it, you can always start the G5 in Target Disk Mode and run the Disk Warrior from the working machine and fix it remotely. Is this a possibility?

Similar Messages

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that go on and on ad infinitum... I think it's a virus or a corruption? Can anyone tell me or help me and let me know what I'm dealing with here or wether I'm mistaken and should leave it alone?
I'd appreciate it.
Thanks,
Matt

mattmakesvidiots wrote:
Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD
Why do you want to delete those? What have you done so far to do that?
I doubt that Mac has a virus. On the other hand, your attempts to deleted those folders may have caused corruption.
Two other comments:
1) Is there a reason that Mac hasn't been updated to OS X 10.5.8?
2) You've been misled by the poor field labeling on this Web site into trying to type your entire post into the "subject" field. In the future, just put a short summary of your post into that field.

Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10.

Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10. It only happens when I go to a specific local news site, and it is only a Netflix window that opens up. I do have a Netflix account.

Do you have Block Popup Windows checked in Safari/Preferences/Security?
What web site?

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN

I have a Macbook with OSX 10.7.3, and I can't clear my trashcan.

In this trashcan, there's a map called 'Contents', but when I click on the map, he's empty! My system says the map 'Contents" is more as 1.7 GB!
If I chose 'Clear trashcan' , my Macbook asks me if I really want to clear the trashcan, so I say yes. But then, the system says I can't clear my trashcan!
How do I delete this map safety?

I get another file here is the extension
It does not open as PowerPoint template
These are templates that I purchase from Slide Team - just did some last month with no problem - now this month
friends_together_children_powerpoint_templates_and_powerpoint_backgrounds_0611.z ip.cpgz

MacBook with OSX 10.6.8 and Safari 5.1.10

I have a MacBook with OSX 10.6.8 and Safari 5.1.1. My software is up to date, but I receive messages from several sites that my Safari is no longer supported, and I am starting to have problems with my Gmail. Any suggestions?

You need to upgrade the computer's OS or switch to a product such as Firefox.
To upgrade, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(124854)

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

Yes it is the right Disc...
2Z691-6040-A (OEM) Drop-in DVD...
System Requirements  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
Compatibility  eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
http://www.welovemacs.com/2z6916040a.html
I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

Is it possible to downland itunes 10.6.3 I have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer

is it possible to downland itunes 10.6.3 I have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer?

Click here.
(69952)

I have trouble getting my new Apple TV 2 to work to the internet. I have an Imac with OsX 10.6.8 using a 3G modem to connect to the internet. I have a Time Capsule with Airport. I can't get the Apple TV to see my internet connection

I have an Imac with OSX 10.6.8 dual intel core.
Apple TV 2
Timecapsule
3G modem connected to iMac for internet access.
I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
I don't have wired internet but it is probably something to do with using a 3G modem
Any tips on how I can check if the TV coonect to internet and what to do about this problem?
I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
Regards from Michael

Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

i don't think so ... u should update to mavericks thru app store. .. still free

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne Blouin

Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

I have a G4 with OSX 10.2 and my printer died. New printers only seem to work with 10.4.11 and newer - can I upgrade my G4 enough to use a new printer?

I have a G4 with OSX 10.2 and my printer died. New printers only seem to work with 10.4.11 and newer - can I upgrade my G4 enough to use a new printer?

Aha!
Well in outer Mongolia ASAP means something totally different and involves weaving tent fabric from camel hair so that has taken me a bit of time.... However if you have the patience of a saint and the compassion of Mother Theresas' more helpful sister then....
So it would appear I have the following supersonics:
OSX 10.2.1
60 Gb HD
G4 dual processor 1GHz
Now the critical issue here is that I get the computer up to speed enough to be compatible with a modern photo printer - which I think needs to be 10.4.11 or even 10.5
Any assistance would be most gratefully and humbly recieved.

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https but in home wi-fi it connects to all all http and https sites. How fix this problem as I am new this

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https as no security/proxy settings done but in home wi-fi it connects to all http and https sites. How to fix this problem as I am new this operating system. Please any one help me in this as I have installed Delicious Library which is not working in school becoz it searches amzon http site.

I would imagine that at school, you're required to connect through an HTTP proxy.
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. Enter the proxy settings given to you by the network administrator. Click OK and then Apply.
You may wish to create separate network locations for home and school. See the built-in help for instructions.

I have G5 PPC with OSX 10.4.11 and java

Similar Messages

Maybe you are looking for