I have G62-355DX Notebook with Windows 7. Does it come with a built-in card (SD card) reader?

Does this model come with SD card reader?

Hi,
Try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
sfc /scannow                 ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Insert an SD card, wait a few seconds and then open Computer - does the card show here now?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ?

    Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ? Cheers

    I had the same error when trying to update my apps on my ipod touch. I tried to input my security code numerous times to no avail. I also made sure my billing address was the same as what my bank had on file. To fix the issue I went into iTunes, logged onto the iTunes store, went to account settings and reviewed my recent purchases. Turned out that I had made a recent purchase and didn't have enough money left on my credit card to pay for it at the time. I paid off the credit card, and then input my security code once more and now it works fine. I've heard that some debit or pay as you go credit cards require a minimum balance, so make sure you have at least that amount in your account.

  • HT204053 I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

    I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

    Debit card? Are you sure?
    USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html  "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances."

  • I have a macbook pro with a broken video card. How do ensure that my data is completely erased before I sell it ?

    I have a macbook pro with a broken video card. How do ensure that my data is completely erased before I sell it ? Thanks

    1. Connect it to a monitor.
    2. Replace the hard drive.

  • I need to completely delete a number from my iphone, so that when in the letter of a contact i have deleted in a new messagge it does not come up? HELP

    i need to completely delete a number from my iphone, so that when in the letter of a contact i have deleted in a new messagge it does not come up? HELP

    Only by restoring your phone as a new device using iTunes, or Settings>General>Reset>Erase All Content & Settings. You follow this by syncing your content back to the phone. Either that, or you live with it. The data will be overwritten as you use your phone.

  • Camera Connection Kit with a SanDisk CF card reader not working in iOS4

    Camera Connection Kit with a SanDisk CF card reader worked great before switch to 4.2.1. Now I get a message:"The connected USB device requires too much power". Again, worked great in OS3. What did Apple change? Same circumstances. The CCK works with the SD card reader, so it is working. Anyone running into this problem? Any answers? I have to use CF cards. As do many people with DSLRs.

    I would be very happy for Apple to make a Compact Flash card reader just like the SD connection. Its something I would purchase immediately. Sadly Apple is yet to realise that not everbody uses crappy little point and shoot or entry level DSLR cameras and those that have the high end gear are those who woulld actually use the iPad in the real world for a travelling "light-box".
    BTW does Apple ever look at this forum? or is it just a place that they specifically ignore when it comes to faulty programming or products?

  • How to get photos from iphoto back onto an SD card. I have a MacBook Pro with a built in SC card slot.

    How to get photos from iPhoto back onto a SD card. I have a MacBook Pro with built in SD card slot. I have tried "Export" but this does not work.

    It's best to export the photos to a folder and then drag the folder onto the memory card.  Memory cards are usually formatted for PCs, FAT 32, which doesn't permit more than a limited number of files in the root directory. Putting the photos in a folder gets around that limitation.
    OT

  • HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

    Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
    Any other setting needs to be changed?

    Hey, thanks for your updates.
    The photos are 8 character long and extension is .jpg
    The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
    Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
    Can you advice.

  • Can anyone help with a troublesome FireWire card reader

    I have an Addonics firewire card reader to transfer image files to my Macs. It has never been predictable about mounting on the desktop when I insert a card. I've used it with OS 10.2, 10.3 and now 10.4.8. I have the OS set to open Photo Mechanic when I insert a card, but most times, nothing happens. After trying various daisy-chain connections, I have the reader connected directly to the computer, but this hasn't helped.
    Usually, I have to disconnect the cable, then re-connect; I usually do this at the reader end, to save wear and tear on the computer port. Sometimes multiple attempts are necessary, but in the end, this procedure gets results better than anything else. I have tried a different cable, known to be good, with no improvement.
    I have a little utility called Spindown HD, which shows what's attached, and in fact, the reader shows up as connected, but sleeping. So, perhaps this is a "wake-from-sleep" problem instead.
    By the way, Addonics "support" was useless. Their site states that they offer no support on products over two years old. An email inquiry brought the response that they could do nothing to help. On service quality grounds alone, I have bought my last Addonics product.
    Do others have problems with getting FW readers to respond? This is driving me crazy, and wearing out ports or connectors.

    bad card reader, un-supported by Addonics (mfg)

  • Unable for format SD card with HFS using internal Card Reader

    I'm suspecting that this must be a software/driver issue, but I'm stumped... MacBook Air Mid2012 with 10.8 and latest updates.
    The symptom is the following: SanDisk 64GB UHS card in the SD Card slot. Formats fine both FAT and ExFAT. Attempting for format HFS (any combination of encrypted, case sensitive, etc), the card formats but can't mount. Repair fails too.
    Now here's the kicker, put the same card in and external SD Card Reader (via USB), it formats HFS and mounts fine. Still can't mount via the internal reader though. Tried other SD cards, down to 4GB, same deal...
    Hope someone has seen this before! 
    Thanks

    Just a followup, in case others read this thread.
    The problem was a hardware issue, requiring the LogicBoard to be replaced.
    A quick test to verify the problem is to insert a SD Card, run Disk Utility and Erase the SD Card. Any format (FAT, HFS, etc) will be fine.
    Once the Erase is complete, run a Verify Disk. If you have LOTS of errors during the verify, then there is a problem.
    Thanks

  • X200 with 3-1 Media Card Reader w/o modem available?

    Hello
    Is it possible to configure an x200 wtih the 3-1 Media Card Reader w/o Modem instead of the 5-1 Media Card Reader w/ Modem. Their is only one option for the x200 ( 5-1), however for the x200s the option for either one is available. So if call lenovo would I be able to get the 3-1 instead?
    Note from Moderator: Added more descriptive subject.
    Message Edited by nonny on 12-19-2008 08:14 PM

    I am confused by this as well.  I don't quite understand why it gives you the option of 3-1 without modem or 5-1 with modem.  You would think the less capable card reader would go with the modem...  The price was the same either way on the x200 so I just did 5-1 with modem.  Still a bit unclear on Lenovo's part if you ask me.

  • Help with Mac Book Pro Card reader

    I am hoping that maybe someone here can help me with my MacBookPro OS X 10.8.3 problem.
    All of a sudden, when I put a card from my camera into the card reader and into the computer, it says that there are 0 items.
    It worked fine last week, and now it doesn't.
    It also will not let my external hard drive work on it. When I plug it in, the icon shows up on the desk top but says that there are 0 items in it, and I know that isn't true.
    Please Help-thank you

    try other gadgedts to make sure SD is not empty or formatted

  • Siebel On Demand Intergration WiTh external device like CARD READER

    Hi All,
    Is there a possibility of SOD to interface with an external system like a card reader?
    Thanks
    Natraj

    Well interesting requirement but unfortunately Oracle SOD doesnot provide you any direct integration technique or tool for this, instead a custom WebService development would be required to make this happen.
    Hope this Helps :)
    Regards,
    Messer

  • Problem with an SD / MMC Card Reader!!!

    ok here's the problem! i bought this 512MB DVRS MMC for my cell phone so i kinda thought maybe i could use a card reader ...it will be much faster than the usb cable..so i bought one...the memory works fine in the phone but the reader doesnt recognize the new memory..when i put the 64MB one it works ok and both works fine in my phone!!! maybe i got the wrong reader for this new MMC coz these metal things on both cards doesnt look the same as u can see --->
    [IMG]http://img03.picoodle.com/img/img03/9/9/1/f_MMCm_f8e1c5d.jpg[/IMG]
    the one on top is the new 512MB DVRS MMC..thanx in advance

    sorry card readers can't read cards with password
    remove the password (it exists)
    T18>6210>8310>6800>6210>7610>6680>6210>E50>3110>2610>E65>E61i

  • Problem installing Intel HD Graphics drivers on HP G62-234DX notebook for windows 10

    HI!I have a HP G62-234DX with intel HD Graphics with the processor Intel core i-3. the driver for my laptop is properly working well on windows 7, but aftering upgrading to windows 10, the driver on intel HD Graphics is not working well. I tried to search for the driver compatible for windows 10, but i could not find the driver from your website. the resolution of the graphics on windows 7 was 1360X738, but now the resolution is 1024X 768.So would you help me install the driver compatible with windows 10?Please help!    

    I think you have Intel 3000 video. Here is official word from Intel. It appears Intel 3000 is not supported: http://www.intel.com/support/graphics/sb/CS-034343.htm What is listed under display adapter in device manager?

Maybe you are looking for