I have got a 1500 Kinetic Systems CAMAC crate and 3922 controller. I want to use it with LabView inst
alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?
Many thanks.
Victor. I have got a 1500 Kinetic Systems CAMAC crate and 3932 controller. I want to use it with LabView installed in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Thanks
alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?Victor,
I couldn't find an Instrument Driver for the 3932 crate controler. There is a driver for the 3988: http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/045f8392cc4d1b01862568ab005fbb49?OpenDocument
If you look at the driver it isn't too complex. Well ... actaully there are certain differences when using the 3988 GPIB controller that the driver takes care of that relate to correctly passing commands (FAN).
If the 3922 controller is similar then maybe you can use the 3988 driver and modify it to meet your needs. I'm not familar with the 2915 Kinetic system so I'm not sure what would be easier.
If you have a GPIB board, then you could try using the 3988 driver with your 3922 controller and see if you can modify the driver to get things to work.
I
've only used the 3988 and that was quite three years ago but it might be worth a try.
Best of luck,
Kamran - NI
Similar Messages
-
Can I download it again? I lost my series number too. But I think my registered name are still in your record.
Only FCP X is downloadable. Everything up to Final Cut Studio requires install disks. You might try calling Apple, but the software you seek is over a decade old.
-
I have got a Activation Lock on my iPhone and I need to get it activated. I don't know what Apple ID I was using with my iPhone. It shows as U***@h******.uk which is too short to be my email address. I have reset all my Apple ID passwords and none are activating my iPhone. I have also been into the apple store and they have tried to find out the Apple ID my iPhone was using but this was not successful. The serial number of my iPhone is: C32JN641DTWF
You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID -
what is the redemption code? I have got cd of adobe creative suite 6 and I have just subscribe in creative cloud and I want to activated? so what is the redemption code?
about cs6, Find your serial number quickly
about cc, there is no redemption code. you use your adobe id to sign in and start downloading your apps, https://creative.adobe.com/ -
I have got lot of songs in my mobile and I want to put that in to Ipod. Is it aviable? Without buying? from Itunes?
Put all of your music in itunes on your computer, then sync to the ipod.
-
Please help. My DS created a document under his login on my PowerBook and now, I cannot seem to access it. He doesn't have an email account of his own, I can't seem to save it as a public document in a drop box like I can from my own login and we do not want to use iwork. Is there a way to save it so that I can access it from my login to email to his teacher. I don't want to have to retype it into Pages under my login.
Save the document from his account to an external drive or thumb drive.
Set the permissions (using Finder > Get Info) for "Everyone" to Read and Write.
Your DS will likely be the owner of the file, so you may need his login password to change the permissions.
Regards,
Barry -
I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.
In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others. -
How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.
In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices. -
Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. I've been told I need to purchase paralell Destop 6, Windows licence and Microsoft Office 2008 for PC. Is that correct ?
If you have a MacBook Pro with 10.5, that's usually a machine that's getting long in the tooth and thus running Windows as a virtual machine (one OS inside another) will likely be slow.
Also spending all that money for Windows (VirtualBox is free) and Office seems like almost a waste of effort if the machine is going to die suddenly.
MacBook Pro's last about 4-5 years.
To do what you want your going to have to upgrade OS X to 10.6, then either buy VMFusion or Parallels which they are now catering to 10.7 and 10.8 users, so it's slow on 10.6, or use the free VirtualBox which will run well on 10.6. Then buy a copy of Windows 7 as earlier Windows versions are not being sold, then Office 11 or whatever.
You can also install OfficeMac into 10.6, if they still sell a copy.
You see your outdated really, and anything that can work is soon to be ignored etc.
What I would consider doing instead, since your not a OS upgrade type of person (we are on 10.8 now which won't run on your machine or be extremely slow) is to buy yourself a decent Windows 7 laptop and install Office into that. Some have the demo already inside and all you have to do is activate it.
This way you get your Windows experience and Office experience, don't have to fiddle with complicated virtual machine software, or Apple's problematic Bootcamp etc as Apple really is leaving 10.5 and 10.6 users behind, and by next summer will be leaving 10.7 users behind too.
Windows 7 laptop will be the cheapest and least stressful option for you, you can continue to use the Mac until it drops dead of course.
I say this because your on 10.5, your like most computer users, just a computer user and not a geek.
You obviously have some reason you need Office, likely for a job or school and since 99% use Windows and Office, then that's what you should be using.
If your only needing Office or Office like program for something temporary, then I suggest you install the free LibreOffice into OS X, however I don't know if it will run in 10.5, you might have to upgrade to 10.6 via the 10.6.3 white retail disk, however Apple doesn't sell it anymore, but perhaps Amazon or elsewhere does.
Sorry, you have been out of the upgrade loop for quite some time, so a new machine is in order as that one is about to die soon, so I wouldn't be spending too much on it really.
If you have a fat wallet you can buy a new Mac with 10.8, and have Windows 7 installed in BootCamp (direct boot) and also into VMFusion or Parallels (copies the Bootcamp Windows so you can use both) and Office for you. It will come all set up, enter your password and use the machine.
I think OtherWorld Computing will sell you a pre-configured Mac all set up like that for you, Apple won't do it though.
You can also pay a local PC/Mac specialist to do the same.
Don't forget setting up a backup system for both Windows and OS X, add anti-malware software in Windows, you'll need that.
IMO a new Windows 7 laptop would be the cheaper, less stressful option, Learning Bootcamp and virtual machine software can be a pain if your not computer savvy, al;so Apple has a nasty habit of upgrading the operating system constantly, now on a annual basis. You don't upgrade and all your third party software, then your denied security updates in short order. Windows 7 laptop will last a decade on the same version, only needing simple updates, not upgrades.
If you want your Windows machine to last even longer, like a decade, then get a desktop tower instead of a laptop.
Mac's are for those who can handle a lot of change, as Apple is about always inflicting change. It's costly change too.
Good Luck
Windows in BootCamp or Virtual Machine?
Things to consider before upgrading OS X -
I have Photoshop CS on my Windows XP PC and I am updating to a newer PC with Windows 8. Am I able to install my version of Photoshop or will it interfere with windows 8?.
It is quite easy to transfer your files to the new Mac.
When you start up your new Mac for the first time, it will guide you through the steps of setting up the operating system, and one of the steps will ask you to restore files from another PC, Mac or external drive.
At this point, you can install Windows Migration Assistant on your old PC, choose the option to transfer files from another PC on the Mac and follow the on-screen steps. It will let you choose what you want to transfer, so make sure you transfer the folder with your photographs (normally, Pictures).
After setting up your computer, you will have a lot to learn because it is a completely new operating system. Apple prepared some articles for new users that you may want to read in order to use your computer > http://www.apple.com/support/macbasics/ Also, if you live near an Apple Retail Store, there are workshops there to help you use your Mac -
I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it? I want to use my current Apple ID not the old one. Regards!
Try this
http://support.apple.com/kb/ht1495
Hope it helps. -
I have an iPod mini, 6 GB and want to use it with a Sony CD Boombox but the adapter is different. Can it still work? Don't want to try and break iPod.
Do you mean that the iPod mini won't fit on the "dock" because of shape (of the iPod), or is the docking connection a different type from the "30-pin" dock connector on the iPod mini?
-
I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4.
jatpri1730 wrote:
I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4.
Unfortunately, AT&T does not provide unlocking.
Stedman -
hi my iphone 4 is from telus can, and i got the sim to activate it, but i want to use it with my att account. how can i do this?
contact telus as to how you get it unlocked
-
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???
MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-
Maybe you are looking for
-
Safari, Mail, Update all quit unexpectedly
This is my first Mac; I bought it in November and I upgraded to Leopard right away. However, I'm having so much trouble that I have had to install Tiger on a separate partition and dual-boot. The problem is that I can no longer launch several applica
-
I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside tha
-
How do i convert a landscape txt file to a landscape pdf. i only get portrait when i convert
When I convert a text file that is in landscape format the converted file comes in as a portrait pdf
-
Hello everyone, Where I can see the list of Held documents report of all users. In SAP there is an option to see the own held documents.. Please be aware that the system I'm asking the report for is 4.6C Thanks in advance Krysia
-
LR5 vs ACR developing capabilities?
are the developing capabilities completely equal when it comes to gamut and histogram between ACR and LR5 (5.?) or to get equality do I have to develop in soft proof mode in LR5?